Excellent explination and illistration, I feel abit more knowledgable so when i attempt to install blinkers on my wifes Harley Sportster i will know what to order and what to look for when pulling wires ! Awesome
Dude I love you finally someone who knows what they are talking about and actually helping to make it easier I have a 97 cb250 nighthawk dead on exact color and mine the Japanese version
Got my first 125 virago a few weeks back partly for commuting partly for something to learn in my downtime and videos like these are helping a bunch so thank you from across the pond!
Ty very well explained I am so happy that I found this video a lot of questions that I have about my 1983 Yamaha 920 blinker wires and running light wires are now answered I know nothing about wiring but now I feel like I know a little bit thank you
Just started my first build on an 85 Yamaha virago xv700.. I am about to get into the wiring harness very very soon i appreciate how clear and to the point you are.. Will be tuned in for more
@@trillmiguell7866 not bad I've got power back through the bike now I just need to find a fuel sending unit to seal off the tank and I'll be ready for gas and first start up
I have a pair of integrated mirror turn signals with 2 leads. I wired in black purple and it works. What should I do with the blue wire to keep from getting an open circuit indicator causing it to blink faster?
Help plz!!! Thank you so much for explaining this , I just bought some turn signals from Amazon but they have running lights and underneath is the blinker bolb , but my bike has Brown, Blue and black but the turn signals wires are black,yellow and red .. how do I connect them ?
So yeah great vid. Can u by chance tell me why my turn signals quit working? I have brake and front and rear running’s lights and horn. My turn signals do not flash and i have no voltage output. I do have continuity. 2008 vtx 1800
Hi there i have a 2017 Honda CRF 250L and trying to install an OEM front turn signal on the bike... the OEM is a 3 wire system(green,red,black wires)... Honda harness Right side has green,blue and blue/white wires and the Left side has green,orange and orange/white... kindly help me out which wires should be connected to which.Big thanks.
Hi, so I bought the same headlight and I noticed it only has a red wire and green wire with connecting prongs. There is not 3 wires like I've seen on other models. Can you show how you get the turn signals to work off only those 2 wires, and I know one is DRL's, so really how does it operate with one wire?
I had a 1 tail light for everything and trying to delete it and run rear turn signals and only running/brake light for the license plate, do you have an idea how to wire this? TIA
Awesome! You are pretty much working on the same bike as I am. Can you make a video of running the wiring system from scratch? Not many videos of that out there. Working with a mess of a 96 Vulcan classic. (Long story)
@@carolinabobbers592 hey thanks! Haven't had time really to mess with the bike. My new stator and rectifier would come in and I think I'm going to get that done this weekend. I would love to run a whole new wiring harness so I know what's what. Thanks again and keep up the good work.
I’m having an issue on my 2002 vstar 650. I bought new LED turn signals for the rear (they have 3 wires). I connect one wire to ground (black), & the other wire to power for the signals (brown or green). When I connect the new LED lights, the front signal lights go out, the new LED lights stay lit & the turn signals aren’t working at all. If I connect my old original turn signal lights, everything works normal. What should I do ?
I’m having a very rough time installing bullet LED lights at the rear of my 2015 Indian scout. I cannot get the flashers to turn on at all. I still have the incandescent bulbs in the front of the bike. Any help at all will be appreciated
Can I reach out to you about fixing my bike?! I recently brought a 85 Yamaha Virago 700. It runs but looks like crap. The brake light just went out and there are no turn signals. I do see the wires though. I’m pretty sure the exhaust gasket needs to be changed. It’s popping while I’m riding. Carbs cheese cleaning maybe?? I’ve never done it before but I’m up for the challenge. Any advice?
Help… I got turn signals and fog lights off eBay. And I put all the wires correctly I belive.. I put blue with blue green with green and black with black.. and when I turn the left signal on the right one blinks insted. I hope I dint mix up the wires.
My bike I got second hand and there no turn signals at all, I’m purchasing the original turn signals and I am writing this. I have not much experience in wiring up a bike, but I have an understanding of the wiring except the front turn signals, my bike is a 1988 fxstc hd and I’ve had it since 2016 but it has been sitting since 2017, looking forward to getting this right
I have a 83 xv500 I want to rewrite and eliminate my bike I have the same headlights as you in this video I bought new turn signals I’m not sure why I have so many relays and other components is there anything I can get rid of and can you possibly draw a simplified version of a wiring harness or can I buy a harness possibly from you I just want clean neat simple
You need three wire taillights for some model Harley’s like the ones with run/turn and brake lights in the rear turn signals lights like the one in my pic…
Yeah I'm looking for a video about trying to figure out the wiring or turn signal wiring for a 1980 shovel. Just trying to pick up all the information to help me alone thank you
My front turn signal wires on my 1999 883 Sportster are a 3-wire red black and a black with a white tracer I am trying to hook up joker machine that is a two-wire red and black wire what do I need to do to complete this
man im not good with wiring on any vehicle trying so hard with it got a 84 shadow vt700 and i cannot figure out what the last owner did to it driving me insane
Thanks. I have 7 wires going from the rear forward; three from brake light (Black, red, and yellow) and two each from blinkers; (Black, black/white stripe). Going rearward however I only have four wires; (red, yellow, black, and back/white stripe). How do these all connect?
@@martinsinclair55 Is the bike set up to use traditional handle bar controls or buttons with the digital M-unit? The xtra wires will go to your controls and then the simple wiring to your lights from the controls. send me an email and I will send you the wiring chart for the M-units
I think three black wires coming from back are grounds, so firstly do they just get grounded anywhere on the frame or connect to one of the wires from the front?
@@carolinabobbers592 I have traditional handlebar controls for lights and blinkers. I already have M-unit manual but just don't know how to attach 7 wires into 4 at the back.
On mine the horn don't work,...none of the lights work,...but the head light works? I have the wiring schematics,..... the right front was wired wrong,... but I stopped there,... I was tired because I couldn't figure out how to get to the rear ones on a 1993 honda vt 500 shadow? All the fuse's are good? If I turn the key to the left the left turn signal comes on the license plate light and tail light comes on,....but just the head light when the ignition is on. And on my 1992 VF 750 C Magna I put the battery in turn the ignition and get nothing,... all of the fuses I find are good so I have no clue there?
Aftermarket lights comes with yellow red and black wire My turn the signal wires for the back the right turn of signal is green and black and the left turning signal is black and black with white strip can somebody help please
who can i get a key made, i have the code # and can get a blank key. i bout a bike needing work after picking it up the original owner lost the one key they hade and this bike has 5 locks on it, can you help brother ?
Hello, Sir. What is your direct email ? I have an 01 vstar. I’m changing the bars from ape hangers to tracker style and I’m uncovering a bunch of new minor jobs. I’d love to speak with you as you seem to have a lot of experience on the same bike. Thank you ! Jamie-
Man I was having a stroke last night trying to figure out why my turn signals weren’t working. Thank you so much for this video.
I stroke out every time I touch the electrical system on a bike
Excellent explination and illistration, I feel abit more knowledgable so when i attempt to install blinkers on my wifes Harley Sportster i will know what to order and what to look for when pulling wires ! Awesome
Super convenient that you're showing this with the exact bike and headlight I'm trying to put in. Much appreciated my man
Glad I could help friend
Dude I love you finally someone who knows what they are talking about and actually helping to make it easier I have a 97 cb250 nighthawk dead on exact color and mine the Japanese version
Awesome!
Got my first 125 virago a few weeks back partly for commuting partly for something to learn in my downtime and videos like these are helping a bunch so thank you from across the pond!
Ty very well explained I am so happy that I found this video a lot of questions that I have about my 1983 Yamaha 920 blinker wires and running light wires are now answered I know nothing about wiring but now I feel like I know a little bit thank you
I will help any way I can
Just started my first build on an 85 Yamaha virago xv700.. I am about to get into the wiring harness very very soon i appreciate how clear and to the point you are.. Will be tuned in for more
how did it go?
@@trillmiguell7866 not bad I've got power back through the bike now I just need to find a fuel sending unit to seal off the tank and I'll be ready for gas and first start up
Very clear instructions Thanks
Just got led turn signals for my 03 sportster. Noticed the colors on the new ones are different color than the old ones.
I have a pair of integrated mirror turn signals with 2 leads. I wired in black purple and it works. What should I do with the blue wire to keep from getting an open circuit indicator causing it to blink faster?
Fantastic explanation
Great video, thank you. I would like to delete the running light on my front turn signals and use a two wire turn signal is this possible?
Help plz!!!
Thank you so much for explaining this , I just bought some turn signals from Amazon but they have running lights and underneath is the blinker bolb , but my bike has Brown, Blue and black but the turn signals wires are black,yellow and red .. how do I connect them ?
Good job on explaining everything, is there a way you can tell me where you bought the front turn signal bracket?
Looks like Blue collar bobbers
So yeah great vid. Can u by chance tell me why my turn signals quit working? I have brake and front and rear running’s lights and horn. My turn signals do not flash and i have no voltage output. I do have continuity. 2008 vtx 1800
I have a 1971 chopper. Has no turn signals currently. Just headlight
taillight/brakelight. Would this diagram work you think ?
Hi there i have a 2017 Honda CRF 250L and trying to install an OEM front turn signal on the bike... the OEM is a 3 wire system(green,red,black wires)... Honda harness Right side has green,blue and blue/white wires and the Left side has green,orange and orange/white... kindly help me out which wires should be connected to which.Big thanks.
Thank you for the great information.
this great but which wire is for the brake ?yamaha raider
Thanks for the video 🤠🦊🏍👍🏻
Thank you for watching!
Hi, so I bought the same headlight and I noticed it only has a red wire and green wire with connecting prongs. There is not 3 wires like I've seen on other models. Can you show how you get the turn signals to work off only those 2 wires, and I know one is DRL's, so really how does it operate with one wire?
I had a 1 tail light for everything and trying to delete it and run rear turn signals and only running/brake light for the license plate, do you have an idea how to wire this? TIA
Awesome! You are pretty much working on the same bike as I am. Can you make a video of running the wiring system from scratch? Not many videos of that out there. Working with a mess of a 96 Vulcan classic. (Long story)
I will make a scratch wiring video
@@carolinabobbers592 hey thanks! Haven't had time really to mess with the bike. My new stator and rectifier would come in and I think I'm going to get that done this weekend. I would love to run a whole new wiring harness so I know what's what. Thanks again and keep up the good work.
I’m having an issue on my 2002 vstar 650. I bought new LED turn signals for the rear (they have 3 wires). I connect one wire to ground (black), & the other wire to power for the signals (brown or green). When I connect the new LED lights, the front signal lights go out, the new LED lights stay lit & the turn signals aren’t working at all. If I connect my old original turn signal lights, everything works normal. What should I do ?
I’m having a very rough time installing bullet LED lights at the rear of my 2015 Indian scout. I cannot get the flashers to turn on at all. I still have the incandescent bulbs in the front of the bike. Any help at all will be appreciated
Can I reach out to you about fixing my bike?! I recently brought a 85 Yamaha Virago 700. It runs but looks like crap. The brake light just went out and there are no turn signals. I do see the wires though. I’m pretty sure the exhaust gasket needs to be changed. It’s popping while I’m riding. Carbs cheese cleaning maybe?? I’ve never done it before but I’m up for the challenge. Any advice?
T BROWARD , my advice? It'll make great boat anchor.
How about when I have 4 wire aftermarket turn signals and I want to put them on the back?
Help… I got turn signals and fog lights off eBay. And I put all the wires correctly I belive.. I put blue with blue green with green and black with black.. and when I turn the left signal on the right one blinks insted. I hope I dint mix up the wires.
I got a part off eBay and even tho I switch the blue wires they still are opposite. If I turn the left one on the right one turns on insted
My bike I got second hand and there no turn signals at all, I’m purchasing the original turn signals and I am writing this.
I have not much experience in wiring up a bike, but I have an understanding of the wiring except the front turn signals, my bike is a 1988 fxstc hd and I’ve had it since 2016 but it has been sitting since 2017, looking forward to getting this right
I have a 83 xv500 I want to rewrite and eliminate my bike I have the same headlights as you in this video I bought new turn signals I’m not sure why I have so many relays and other components is there anything I can get rid of and can you possibly draw a simplified version of a wiring harness or can I buy a harness possibly from you I just want clean neat simple
Where would you install the resistors
You need three wire taillights for some model Harley’s like the ones with run/turn and brake lights in the rear turn signals lights like the one in my pic…
I need help installing new 3 wired rear turn signals on my moped which is 2 wired multiple different colored wires
Both of my left turn signals, front and back aren’t working. Any idea what I need to look into?
Yeah I'm looking for a video about trying to figure out the wiring or turn signal wiring for a 1980 shovel. Just trying to pick up all the information to help me alone thank you
Why can’t you have running lights for the back as well ? More lights to be seen with.
My front turn signal wires on my 1999 883 Sportster are a 3-wire red black and a black with a white tracer I am trying to hook up joker machine that is a two-wire red and black wire what do I need to do to complete this
If you get a 3 wired signal but it's for the rear, can you cut the blue wire?
Just fold it back and tape over it
man im not good with wiring on any vehicle trying so hard with it got a 84 shadow vt700 and i cannot figure out what the last owner did to it driving me insane
Thanks. I have 7 wires going from the rear forward; three from brake light (Black, red, and yellow) and two each from blinkers; (Black, black/white stripe). Going rearward however I only have four wires; (red, yellow, black, and back/white stripe). How do these all connect?
What motorcycle do you have?
@@carolinabobbers592 Custom. Triumph motor in a Trackmaster frame with M-unit bue setup.
@@martinsinclair55 Is the bike set up to use traditional handle bar controls or buttons with the digital M-unit? The xtra wires will go to your controls and then the simple wiring to your lights from the controls. send me an email and I will send you the wiring chart for the M-units
I think three black wires coming from back are grounds, so firstly do they just get grounded anywhere on the frame or connect to one of the wires from the front?
@@carolinabobbers592 I have traditional handlebar controls for lights and blinkers. I already have M-unit manual but just don't know how to attach 7 wires into 4 at the back.
On mine the horn don't work,...none of the lights work,...but the head light works?
I have the wiring schematics,..... the right front was wired wrong,... but I stopped there,... I was tired because I couldn't figure out how to get to the rear ones on a 1993 honda vt 500 shadow?
All the fuse's are good?
If I turn the key to the left the left turn signal comes on the license plate light and tail light comes on,....but just the head light when the ignition is on.
And on my 1992 VF 750 C Magna I put the battery in turn the ignition and get nothing,... all of the fuses I find are good so I have no clue there?
Send me the model and a picture and I will help you get it working. My email is peavinecompany@yahoo.com
Man I need help for my Suzuki intruder 800 for the turn signal for the rear..
Aftermarket lights comes with yellow red and black wire My turn the signal wires for the back the right turn of signal is green and black and the left turning signal is black and black with white strip can somebody help please
who can i get a key made, i have the code # and can get a blank key. i bout a bike needing work after picking it up the original owner lost the one key they hade and this bike has 5 locks on it, can you help brother ?
that is encluding the ignition
Hello, Sir.
What is your direct email ?
I have an 01 vstar. I’m changing the bars from ape hangers to tracker style and I’m uncovering a bunch of new minor jobs.
I’d love to speak with you as you seem to have a lot of experience on the same bike.
Thank you !
Jamie-
Send me the model and a picture and I will help you get it working. My email is peavinecompany@yahoo.com
Deutsch plugs