Your videos and that of all of blade have given myself the confidence to fly helis. Thank you very much for your work with these vids. They make even a old man like me sound like I know what I'm doing.
Mikel, many, many THANKS!!! Your vids just helped me to replace the spindle (feathering) shaft, tail boom, and adjust set up. It actually flys better now, than it did out of the box!! Your hard work has made a difference for many of us in the hobby!!
Thanks a bunch Mikel Graham !!! This is big help. And no doubt for many of us. And great video tutorial--you explain simply and clearly. Showing not just "how" but "why"; some other videos aren't clear like this. Had to write this cuz many of us search through many vids just to get answers--a real drag.
Check the pitch of the paddles on your flybar. That's what caused a similar situation on mine. All good now. Just make sure the pitch is level on both sides by lining them up with the two allen screws at the cradle.
Great video well spoken and detailed explained, thank you for uploading this video and takingbyour knowledge and time to do this, much appreciated as I just bought a Hausler 450 V2 3D Helicopter and needed help. found your video now i am all good...
Hi t dog and Scott. You can tune the 450 3D down using D/R and Expo settings in the DX6i or what ever TX you have. I guess you can do the same for the 450X.
I just bought a used one! Its great. What lipo would you recomend for me to get? There was only one with it but its not a very good one. Thanks a lot. :)
I've recently rebuilt and my throttle stick doesn't move the servos to increase pitch past 50% midstick. I.e. I when I am increasing my throttle my pitch stops moving up half-way...DX6i and Blade 450x...anyone have any idea?
wish blade would build one 450 size with safe tect so reg, people could have one they could fly , the cp is to dam hard and take years to learn, come on blade!!!
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
Your videos and that of all of blade have given myself the confidence to fly helis. Thank you very much for your work with these vids. They make even a old man like me sound like I know what I'm doing.
2019 - I’m still referencing these videos to refresh my memory and improve my skills
Mikel, many, many THANKS!!! Your vids just helped me to replace the spindle (feathering) shaft, tail boom, and adjust set up. It actually flys better now, than it did out of the box!! Your hard work has made a difference for many of us in the hobby!!
Thank you over and over. It's good to see a qualified person out there with specific and clear instructions.
Mitch
Thanks a bunch Mikel Graham !!! This is big help. And no doubt for many of us. And great video tutorial--you explain simply and clearly. Showing not just "how" but "why"; some other videos aren't clear like this. Had to write this cuz many of us search through many vids just to get answers--a real drag.
Check the pitch of the paddles on your flybar. That's what caused a similar situation on mine. All good now. Just make sure the pitch is level on both sides by lining them up with the two allen screws at the cradle.
I am glad I found your video, this is very helpful. great explanation.
I'm buying the blade 500 3D next week. This video helps me a lot with my cpx and ninja 400 3D pro
Great video well spoken and detailed explained, thank you for uploading this video and takingbyour knowledge and time to do this, much appreciated as I just bought a Hausler 450 V2 3D Helicopter and needed help. found your video now i am all good...
Awesome tutorial !
thankyou my heli was flying like a pig! but not anymore just like new now am so grateful
Great video, i would like to see more videos on how to repair the blade 450 3D.
Lots off thanks,very helpfull,very clear,u just answered lots off questions.
you've saved me with these video's. big thank you :)
@26nosscire It Is. Change the rudder servo to the same one as the 450 as well.
Great video! Very helpful. Thanks, buddy.
Great video
Hi t dog and Scott. You can tune the 450 3D down using D/R and Expo settings in the DX6i or what ever TX you have. I guess you can do the same for the 450X.
others says that....pitch slider at center.....5 deg pitch on the tail to initially counter the torque force caused by main blades
This a a great help for me. Any others like it? I have a 3d with a tail wag. Turning down gain is helping but still not 100% there yet,
Cheers mate!
I just bought a used one! Its great. What lipo would you recomend for me to get? There was only one with it but its not a very good one. Thanks a lot. :)
Question can i apply this setup tutorial to my blade 400 I think the blade 450 is almost the same setup
What is the ball link spacing on the 450x? I can't seem to find it anywhere online.
I've recently rebuilt and my throttle stick doesn't move the servos to increase pitch past 50% midstick.
I.e. I when I am increasing my throttle my pitch stops moving up half-way...DX6i and Blade 450x...anyone have any idea?
Will this work with the blade 330s flybarless unit ???
wish blade would build one 450 size with safe tect so reg, people could have one they could fly , the cp is to dam hard and take years to learn, come on blade!!!
The blade 200rsx is a great upgrade, I know I have really enjoyed learning to fly it ..
I dont get how to use the pitch gauge that you are using. :(
Dou you think this would be a good heli after the mSR X?
yes but!!!!!: ONLY IF YOU BUY AND PRACTICE AND GET VERY GOOD ON !SIMULATOR! !FIRST!