5:29 These are to fill the gaps. Same Job as the pads from the other guys video. Quick Question, what's its weight compared to the original quick release plate? Is the new plate usable with backpack quick release system? (In case I want to Remove the camera from the gymbal and place it on the backpack strap )
Thanks for this video. My M3 QR plate arrived this morning without instructions. I found your video and your comments were very helpful. My Sony ZV-E10 is now working on the M3 with a quick QR system that enables me to move it to my Peak Design tripod. I had to use the replacement PD Universal Head Adaptor to get this to work, but it seems to be working well with a SmallRig CH10 compact fluid head. I also ordered the Ulanzi Backstrap Strap Clip. I've used the QR plate that came with that in the 1/4" accessory mount on the M3. It seems to work really well and leaves the M3 hanging down from my rucksack strap at a comfortable angle while I use the tripod. I've not used it outside yet but it seems to be OK!
Thanks for the fantastic review & information, very helpful. I have ordered an M3 earlier today & I'm going to now order the F38 too based on your great info. Cheers
I bought the Falcam F38, arrives with no instructions and not cheap here in the UK. Sadly, the quick release is not compatible with the Swiss ARCA on the bottom of my Small Rig camera cage. Seems these manufacturers don’t test their product compatibility which is sad. I am going to have to modify the original and attach a Swiss ARCA that fits / works and send the F38 back.
I got the manfrotto 323 quick release plate and found out that it is too big and heavy for my RS3 Mini gimbal to balance! This one looks way smaller and lighter so I'm going to order this and hope for the best!
Thanks for this review. I made a stupid purchase, I bought a Falcam F38 and put it on top of the existing mount. Of course M3 could not stabilise the additional height (and the changes of gravity centre point). In 2 mins I'll be buying this F38 for M3!
Question, I'm getting ready to get the Crane M3 this week. Couldn't you just mark the exact placement of the screw with 2 pieces of tape? One on the left side and one on the right.
On another note, do you know a case that I can use to store/transport Crane M3? I bought the Pro version that came with a bag and I do not need to travel with a lot of bags! I've been looking around for a case where I can store the gimbal so it does not break anything else when put together in a suitcase.
I just got mine yesterday. I love this plate. Did yours come with the mini tripod too? So much better than the plate it comes with. I use my M3 with Sony ZVE-10 and it works amazing. Nice and light I love it.
Does this plate work on the crane m3 with the ZV1? Can you use the dummy battery while it’s on the gimbal with this plate? I’d love if you could reply ASAP before prime sale is over please LOL.
Good question - can someone else test and verify? If it uses the same base plate as the crane m3, i dont see why not. Maybe try asking Zhiygun or Ulanzi support.
@@jsyntaxmedia I was looking for this information before buying but couldn't find a user answer so ... just received it today and yes it works on the Crane M2S
Pronunciation of product names in videos sound like gibberish. Always spell out the names of products you're referring to somewhere in your description. Falcam is in the title (thankfully), but if I didn't already know Arca-Swiss I could have never have understood it.
www.ulanzi.com/products/falcam-f38-zhiyun-m3-quick-release-plate?aff=777
It's actually insane the difference in balance this product makes, would 100% recommend.
5:29 These are to fill the gaps. Same Job as the pads from the other guys video.
Quick Question, what's its weight compared to the original quick release plate?
Is the new plate usable with backpack quick release system? (In case I want to Remove the camera from the gymbal and place it on the backpack strap )
Thanks for this video. My M3 QR plate arrived this morning without instructions. I found your video and your comments were very helpful. My Sony ZV-E10 is now working on the M3 with a quick QR system that enables me to move it to my Peak Design tripod. I had to use the replacement PD Universal Head Adaptor to get this to work, but it seems to be working well with a SmallRig CH10 compact fluid head.
I also ordered the Ulanzi Backstrap Strap Clip. I've used the QR plate that came with that in the 1/4" accessory mount on the M3. It seems to work really well and leaves the M3 hanging down from my rucksack strap at a comfortable angle while I use the tripod. I've not used it outside yet but it seems to be OK!
I love the new qr plate! It's a great investment. Glad you like yours as well
Thanks for the fantastic review & information, very helpful. I have ordered an M3 earlier today & I'm going to now order the F38 too based on your great info. Cheers
im loving my setup. I love how small and convenient the m3 is WITH this after-market add-on :) thanks for the comment
I bought the Falcam F38, arrives with no instructions and not cheap here in the UK. Sadly, the quick release is not compatible with the Swiss ARCA on the bottom of my Small Rig camera cage. Seems these manufacturers don’t test their product compatibility which is sad. I am going to have to modify the original and attach a Swiss ARCA that fits / works and send the F38 back.
I got the manfrotto 323 quick release plate and found out that it is too big and heavy for my RS3 Mini gimbal to balance! This one looks way smaller and lighter so I'm going to order this and hope for the best!
Very nice!
Thanks for this review. I made a stupid purchase, I bought a Falcam F38 and put it on top of the existing mount. Of course M3 could not stabilise the additional height (and the changes of gravity centre point). In 2 mins I'll be buying this F38 for M3!
" No instructions were included!
The installation was not so intuitive :("
Literally why I'm watching your video 🤣🤣🤣
Question, I'm getting ready to get the Crane M3 this week. Couldn't you just mark the exact placement of the screw with 2 pieces of tape? One on the left side and one on the right.
Hi! Would you know if this gimbal work in inverted mode (if any) please? Considering getting one second hand with the f38 system 😁. Thank you
Hey, you wouldn’t happen to have the stock receiver and plate that you took off still would you?
you save my day Sir!! Thank you so much for this video!!🙏😊
Can you put the normal arca swiss ung the f38 mount.. i have smallrig cage, does it fit to f38 plate?
I would actually love to know if the Acra normal adaptor will fit the plate. not the other way around. can i slide my fx30 cage in there?
On another note, do you know a case that I can use to store/transport Crane M3? I bought the Pro version that came with a bag and I do not need to travel with a lot of bags! I've been looking around for a case where I can store the gimbal so it does not break anything else when put together in a suitcase.
This is compatible on a peak design capture support??? And M3S? Thanks in advance
Could you test the plate that works with peak design capture too?
I don't have access sorry, but I'll ask my friend if I see him
@@jsyntaxmedia thanks! I just got this and realised the ulanzi plate doesn't work with the peak design capture.
@@K_Naz damnm that sucks, what r u going to do
@@K_Naz See my earlier comment on this video. You could have a look at the Ulanzi Backstrap Strap Clip.
@@K_Naz You have to buy a specific plate from ulanzi that works with both PD and F38 system. Around $10 I think.
I have a zhiyun weebill 2... I was just wondering if this plate is compatible with weebill 2?
Thank you for this video!!!
I just got mine yesterday. I love this plate. Did yours come with the mini tripod too? So much better than the plate it comes with. I use my M3 with Sony ZVE-10 and it works amazing. Nice and light I love it.
Mini tripod? No, can you share a picture
do you recommand it on the weebill 3 ? with the plate that comes with the gimbal, I had the camera falling sometimes
yes it's so good
Does this also work with crane m3s?
Does this plate work on the crane m3 with the ZV1? Can you use the dummy battery while it’s on the gimbal with this plate? I’d love if you could reply ASAP before prime sale is over please LOL.
I’m going to mount the same with Sony ZV1m2.
i can't mount my canon m50 in verticale with m3
anybody have any solution for this problem ?
What was the size of the hex wrench you used to remove the old plate form the gimbal?
It's included in the kit!
Is it compatible with the Peak Design adapter?
I have the same question.. did u find an answer?
I've lost My Base Plate for Zhiyun M3S
do u think, this one would fit???
I think it can.
Do we know if this works on the m3s?
I would assume so but I can’t find anything to confirm.
Yes it does. Mine arrived an hour ago and yes, it fits!
Yeah thanks for that information
Any time!
Question. After installing this mechanism, does it fit into the box in which the stabilizer was originally supplied?
Does this also work on the Crane M2S?
Good question - can someone else test and verify? If it uses the same base plate as the crane m3, i dont see why not. Maybe try asking Zhiygun or Ulanzi support.
@@jsyntaxmedia I was looking for this information before buying but couldn't find a user answer so ... just received it today and yes it works on the Crane M2S
@@flomff4037 amazing TY!
LOVE IT VIDEO
Thank you!
Pronunciation of product names in videos sound like gibberish. Always spell out the names of products you're referring to somewhere in your description.
Falcam is in the title (thankfully), but if I didn't already know Arca-Swiss I could have never have understood it.
Thank you for feedback! Will update with more detailed description