you're an australian legend and i hope you stand up against the death threats and violence threats. youve made me second-guess getting a place built with how dodgy builders can be.
It might not just be a result of builder incompetence, but time. Maybe these builders have been given an unrealistic time frame to build a home, and end up cutting corners, and making mistakes. I think this is something worth considering. Good luck with your dream home!
@@kubabooba548 i'd disagree with that. They give their own timelines. You don't walk in to a property of land and say i want this house and i want it built in this time frame. They sell you homes off plans with their own timelines. I would love to do this for my trade, its terrible
@@supmikey123depends who you employ. Most will give you a quote with the timeframe. They will then employ tradies to complete the job. If there's a shortage of tradies are you willing to wait 5 months to get it done? I think not.
@@supmikey123Correct!Builders only care about time and money,So they give home owner the time frame depending on the maximum profit of builder themselves.Of course quality is nothing especially the builder pay for building surveyors,they are referees and players,they always win…
I have to tell you that I’m learning so much from your videos. Great explanations of the issues and showing the compliance requirements is a bonus. Sadly though, I don’t think you’ll ever be out a job.
The only difference between the buildings and the rubble pile in the yard is that the buildings have been assembled to allow people inside it more easily.
Are all the protruding nails in the roof framing not a safety issue? Excellent work, your opening up a lot of people's eyes. This needs regulations enforced from the top down. If council inspectors don't enforce rules, then there's no pressure on those they inspect! This is costing owners. Plus the building industry its reputation. 😢
If you have any defects or non compliances, you must declare them to your home insurance or claims will be denied. They may offer insurance, however they will insist that rectifications are undertaken. The implications of the cowboy builds, has so many implications for a home owner.
The issue you have is inspectors that if the have a certificate of compliance from tradesmen then they won't check that area. Most won't even look in the roof cavity.
Can I suggest that apart from showing the "non compliance" issues that you also comment on why it needs to be compliant as in with the sarking not going into the valley that any water at that point will go under the valley and onto the timber substructure and potentially further. Might be obvious to some but other people watching may not understand the obvious.
Great video thanks again for exposing this sloppy craftsmanship. Can I suggest you add a lazer pointer to your audio key chain. A lazer would be handy to point out faults inside the roof that you can’t get too and would go with a Star Wars like light saber type theme on the key ring. Just a suggestion. Love your content and grateful for it. ❤
Laser pointers with a power output of more than one milliwatt are now prohibited weapons. You must obtain a permit to possess or use a laser pointer. You can freely build the biggest heap of **** in Australia. but will be prosecuted and fined $10,000 for using a Laser pointer over 1mw.
how likely is it that we can get you to visit and inspect some of the completed houses on The Block (channel 9, pre-sale but post-completion in October 2023) located on Charming Street, Hampton East VIC 3188 ?
The cable crossing the joist where there is more than 600mm clearance above is in breach of AS/NZS3000:2018 Section 3 wiring systems. Anywhere where there is a clearance of 600mm vertical is considered likely to be disturbed. There are other details within this section but that adds to that specific part of the video. Keep up the good work legend
I thought roof tiles in fire prone areas were banned and that metal was the requirement. I am in rural Act fire area and all are metal for that reason the tiles lift under wind load and the embers get in also why in our climate are the tile roofs of dart colour really bad for heat retention
I'm glad you have good standards. I hang drywall and some of the stuff I see and cover . I smh not knowing how it passed.. or how they have work. It's insane
Hey, just a word of advice for your uploads.. Could you think of a naming structure that makes it easier to reference your videos.. such as Hampton House #1 (at least at the end of your video's title), etc. Or Carport Extension #1 etc. Otherwise I just never remember which video I watched and have to keep clicking through them. I love your videos though, so funny to watch. Love it.
The lesson you've taught me is, if I ever found myself in Australia, I'm not buying a house, I'm renting. Can't trust builders or inspectors. Leave the liability on the landlord's shoulders..
The generation of housing commission brick homes built after cyclone Tracy up in Darwin , were heavy duty bunkers . . rock solid all round , the knowhow is still there somewhere , but not being applied for some reason
The rats in roofs Darwin is a trip , around dusk it's like the pied piper from day time hideouts into the ceiling space too hot during day endless lines of big rats in train on face better suburbs
Every morning I catch the train to work. At Wallan, I point out the window at the town houses under construction, and shout 'non-compliant'. My fellow travellers just nod.
Do you guys do inspections in the brisbane area? And i wonder if you have any experience to share with developers land, fence, retaining walls etc. ? Love your work, thanks heaps keep up the good work.
If you ever do a V3 of the soundbites keychain, I nominate the repeated "non compliant" chant in 19:11. Edit: I just noticed that my neighbour's builder used slotted gutters on their new build. 🤦♂️
Scotia on a brand new floor means someone didn't plan properly or doesn't know how to undercut. We would have made them take the skirtings off for a floating floor.
All in the report 😎. You might have missed it in the footage, but did you observe that the valley trusses extended beyond 450 mm and a few were also lacking the support of a pair of top chords? AS 4440 5.4.2, but we'll save that discussion for a future episode, compadre ☺️
G'day, Both houses: the roof spaces. Absolutely terrible, insulation all over the place. But did anyone notice no other trades people in site. They must have been hiding under the piles of rubbish. Both of these houses will be showing signs cracking to the plaster with in 6 months. I feel sorry for the people purchasing these homes.
After Watching only 4 of your videos and for someone who knows nothing about building/construction, Its VERY CLEAR the Government needs to call for an AUDIT into all the inspectors who approve these terrible homes and have their licences pulled, (and bring in a new law that requires 2 or more separate inspections from different people/companies. (i suspect many are being paid off by the builders,approve a bad building and next week annonymous cash payment made into account - Untraceable fraud)
My current house (rented)has metal frames in roof. After beign up there and seeing the structure, i dont think i would build with anything else. Saying that, the house I own has wooden trusses, but being built in 1979 has been done properly and still stands well.
It would be good if you can name and shame the actual building companies that build this garbage as it would act as a deterrent. This is must watch for any new home buyers.
All the wooden rubbish and debris directly against the wall are a termite concern to me especially with a veneer house. I've known similar houses to become riddled with the buggers
Hi loving watching your videos. If I ever build I will definitely be giving you a call to inspect. Have you done any follow up reviews with the doggie builds to see what the results are after they got your inspection report?
At 6:00 the chisel work for the door hinge, what'd the chippy use, a butter knife? Question are painters using quality paint or imported non standard? Some dodgy painters are using bait and switch, they put bulk paint into 20l name brand tins and turn up on site, looks legit. As soon as you smell it OMG! It also goes on badly and provides lousy coverage.
@@larkhill2119 Yep saw that too, poor bloke was down to his last 20k in his business and was contemplating selling his house just to keep going. More integrity in that man's pinky than the former owner of Porter Davis's whole body who rushed off to a holiday overseas as soon as it got a bit too hard for the poor snow flake.
I live in Perth WA and have heaps of houses being built in the northern suburbs and I have been in quite a few that are way worse than most houses you are showing, it’s criminal how they get away with houses here !
As always, another awesome video capturing the shocking truth around the quality of work carried out by some ‘professional’ trades. 🤦♂️ I just had one question. Are the specification’s you detail regarding back blocking an Australian standard or state specific? I’m in SA and was wondering if the same requirements also apply here. Thanks mate. Keep up the detective work.
the algorithm bought me a couple of days back and wow, there some seriously shoddy work out there :o i thought id have a laugh and take a swig of beer everytime you exclaimed "non compliant!" or " OMG!".. well that ended in quick time 😂🤪 keep up the good work man
Brother any chance of you coming to NZ?? lol thinking of some renos but after watching your content just gets me thinking who can we trust!?! Love your work...be safe God bless!!
It may be as simple as cutting ORG riser down to 150 mm below shower waste, but often the ORG height can be difficult to achieve due to where is convenient to achieve compliance is not a satisfactory location from an aesthetic point of view or path of travel obstacle whilst maintaining minimum falls. It could also be as major as digging the whole sewer up and starting again. It sounds elementary, but ORG height really needs to be known and calculated in at subfloor drainage stage. The ORG is a very unassuming item, but really does stop shit hitting the fan when required.
Good educational videos sir .We need an NCC video, clause by clause and required AS for each part. Maybe 1 video for each chapter would be great to ol to educate people
The person who issued the Occupation Certification should have his license removed. Seems like Australia has the same issue of poor quality workmanship as we have in the UK. Time for new build contracts to have a retention clause to withhold full payment from the purchase price until the completion of all defects and non-compliant work. This needs to be a Federal and Government statutory requirement for it to work.
The problem is you are paying $450 a week in rent and a mortgage on your uncompleted new home. Although this case looks like pure fraud in my opinion as it is impossible to move in. Are any prosecutors out there with enough gumption to take on the corruption?
@@larkhill2119 It should be the State taking action here on behalf of the purchaser. and preventing this developer from ever working in the industry again.
I thought you where at mt hotham :) 1min into this and seeing the mess in the background - like a bombs gone off episode of HORDERS 6:26 MAY BE THE BUILDER IS COLLECTING SCRAP METAL
12:13 The air conditioner might be too close to the wall depending on the brand but normally 150mm minimum. Blockage of the rear vent will cause high gas head pressure and compressor failure. The warranty will be declined by the manufacturer even if the fault may have been a normal failure.
That's what happens when the fascia and gutters go on before the brick walls are built. They have to adjust the cavity of the walls to line up with the fascia
Hi….what about independent building inspectors which builders use for their jobs… I called my inspectors and they said any issues will come on them and not the builders … not sure who to trust now after looking at this :( … I was only planning to do a final inspection at the end due to the costs involved… will final inspection be able uncover all issues ? Structural and compliance ?
Great video exposing these poorly built homes. What a complete sh.itshow the construction industry has become in Australia. The Government has to clean up the construction industry, but don’t hold your breath on that happening any time soon.
![Jack Harlow - Hello Miss Johnson [Official Music Video]](http://i.ytimg.com/vi/Q86_nlRoIGw/mqdefault.jpg)
you're an australian legend and i hope you stand up against the death threats and violence threats. youve made me second-guess getting a place built with how dodgy builders can be.
Not a builder, not a new home buyer, just love seeing someone so passionate and knowledgeable about what they do.
It’s because of you I am planning on paying for a building inspector to check every few weeks. Thank you.
It might not just be a result of builder incompetence, but time. Maybe these builders have been given an unrealistic time frame to build a home, and end up cutting corners, and making mistakes. I think this is something worth considering. Good luck with your dream home!
@@kubabooba548 thank you, Yes, I’m getting for the sub contractors. Not the builder. I don’t want unexpected delays.
@@kubabooba548 i'd disagree with that. They give their own timelines. You don't walk in to a property of land and say i want this house and i want it built in this time frame. They sell you homes off plans with their own timelines.
I would love to do this for my trade, its terrible
@@supmikey123depends who you employ. Most will give you a quote with the timeframe. They will then employ tradies to complete the job. If there's a shortage of tradies are you willing to wait 5 months to get it done? I think not.
@@supmikey123Correct!Builders only care about time and money,So they give home owner the time frame depending on the maximum profit of builder themselves.Of course quality is nothing especially the builder pay for building surveyors,they are referees and players,they always win…
I have to tell you that I’m learning so much from your videos. Great explanations of the issues and showing the compliance requirements is a bonus. Sadly though, I don’t think you’ll ever be out a job.
It's so sad to think how hard people work to get their dream home and this is what the developers and builders do to them
It’s such a shame. I also noticed that the windows are single pane which are horrible for energy efficiency :(
Yep builders know they can get away with it. Governments fault.
The scotia over the floor next to new skirting tells me everthing abouyt this house.
Yes indeed it’s disgraceful
What do people expect when the industry is under intense pressure and flooded imported low quality labour and with low quality design and
Would be good to see a video on compliant housing where the builder has done an excellent jobs
I agree whole heartedly but I'm starting to think in Victoria they don't exist
U wont even get one from this tool
@@davidsmith-ih2kk Actually they do exist, but cost 50% more, so most punters go for the cheap price. Sorry but its true.....you get what you pay for.
@@espenforfen1334Problem in Australia is land is so expensive that people need to build cheap houses.
Doesn’t exist.
Classic volume build quality A+ as always
Volume or non volume, builders are building crap
Seeing this makes me feel ill. I feel terrible for any new home owners who've been given garbage like this. Unacceptable
These videos make me feel much better about the work i do on my own house renos
Same here. Our home work beats this stuff hands down.
The only difference between the buildings and the rubble pile in the yard is that the buildings have been assembled to allow people inside it more easily.
Are all the protruding nails in the roof framing not a safety issue? Excellent work, your opening up a lot of people's eyes. This needs regulations enforced from the top down. If council inspectors don't enforce rules, then there's no pressure on those they inspect! This is costing owners. Plus the building industry its reputation. 😢
If you have any defects or non compliances, you must declare them to your home insurance or claims will be denied. They may offer insurance, however they will insist that rectifications are undertaken. The implications of the cowboy builds, has so many implications for a home owner.
The issue you have is inspectors that if the have a certificate of compliance from tradesmen then they won't check that area. Most won't even look in the roof cavity.
It's crazy to me a window installer would leave those gaps so water can get in under the window. Glad you caught it and will get it fixed.
Can I suggest that apart from showing the "non compliance" issues that you also comment on why it needs to be compliant as in with the sarking not going into the valley that any water at that point will go under the valley and onto the timber substructure and potentially further. Might be obvious to some but other people watching may not understand the obvious.
Great video thanks again for exposing this sloppy craftsmanship. Can I suggest you add a lazer pointer to your audio key chain. A lazer would be handy to point out faults inside the roof that you can’t get too and would go with a Star Wars like light saber type theme on the key ring. Just a suggestion. Love your content and grateful for it. ❤
I had one but recently got stolen along with my tool bag 😭.
Already ordered one, I will incorporate it in my future videos 🙏❤️
Laser pointers with a power output of more than one milliwatt are now prohibited weapons. You must obtain a permit to possess or use a laser pointer. You can freely build the biggest heap of **** in Australia. but will be prosecuted and fined $10,000 for using a Laser pointer over 1mw.
Kudos for not swearing in any of your videos. A benefit of this is that it makes you appear more sophisticated. 👍
I learned a new word...shemozzle.
Coming from the guy with "Cracka" in his name...
Great video
When you say it's non compliant you should show a photo of a what it should look like from another house
Good idea!
how likely is it that we can get you to visit and inspect some of the completed houses on The Block (channel 9, pre-sale but post-completion in October 2023) located on Charming Street, Hampton East VIC 3188 ?
Sounds juicy 🤠
Email us please 🤠
Yes please !!
Love to see a video on these
That would be amazing. I would pay to see that!
Ninja takes down The Block, I wanna see that!
Love what you do mate. Always look forward to your videos!
Much appreciated!
You are the ninja of inspectors!! 🔥
I just have to unlock my sharingan…
@@Siteinspections 🤣 if we ever buy another house you are definitely da man 💪
The "rectification" of the broken beam is hilarious.
The cable crossing the joist where there is more than 600mm clearance above is in breach of AS/NZS3000:2018 Section 3 wiring systems. Anywhere where there is a clearance of 600mm vertical is considered likely to be disturbed. There are other details within this section but that adds to that specific part of the video. Keep up the good work legend
Having tile roofs in fireprone areas is insane. There's way too many points of entry for embers.
I thought roof tiles in fire prone areas were banned and that metal was the requirement. I am in rural Act fire area and all are metal for that reason the tiles lift under wind load and the embers get in also why in our climate are the tile roofs of dart colour really bad for heat retention
The extracts kill it bro, keep up the good work!
I'm glad you have good standards. I hang drywall and some of the stuff I see and cover . I smh not knowing how it passed.. or how they have work. It's insane
Hey, just a word of advice for your uploads.. Could you think of a naming structure that makes it easier to reference your videos.. such as Hampton House #1 (at least at the end of your video's title), etc. Or Carport Extension #1 etc. Otherwise I just never remember which video I watched and have to keep clicking through them. I love your videos though, so funny to watch. Love it.
Thanks for the idea!
Thank you, please continue your VALUABLE, SERVICE
I would like to see follow up videos on what the builders do to fix these non compliant faults
Thanks
They fold their companies and move overseas.. cut and run. Ultimately the owner has to pay another builder to fix it up.
The lesson you've taught me is, if I ever found myself in Australia, I'm not buying a house, I'm renting. Can't trust builders or inspectors. Leave the liability on the landlord's shoulders..
Or hire him to do your inspection?
Your doing great work exposing these homes for what their are ,how many times do u think you have said non compliant in your career 😮
The generation of housing commission brick homes built after cyclone Tracy up in Darwin , were heavy duty bunkers . . rock solid all round , the knowhow is still there somewhere , but not being applied for some reason
The rats in roofs Darwin is a trip , around dusk it's like the pied piper from day time hideouts into the ceiling space too hot during day endless lines of big rats in train on face better suburbs
Hahaha merry Christmas buddy!! So funny. I let my license go 3 years ago.
Love your inspection.
What happened to building??
That flyscreen material is correct. Aluminum mesh is bal safe.
Every morning I catch the train to work. At Wallan, I point out the window at the town houses under construction, and shout 'non-compliant'. My fellow travellers just nod.
DO your home work ... love and share ... this guy is the best
You have the best RUclips 🎥📺📱 thanks Les from Perth
Do you guys do inspections in the brisbane area? And i wonder if you have any experience to share with developers land, fence, retaining walls etc. ?
Love your work, thanks heaps keep up the good work.
If you ever do a V3 of the soundbites keychain, I nominate the repeated "non compliant" chant in 19:11.
Edit: I just noticed that my neighbour's builder used slotted gutters on their new build. 🤦♂️
How the heck are you able to quote so many specific clauses across multiple Australian Standards? Amazing
When you do something every day and have to write reports on it.
You would be amazed what you can remember,
I can't believe the rubbish on the sites. We had to keep our sites clean. At the least tidy up at the end of the day and rubbish in a skip.
My goodness. When I look at the conditions some people live in, it just makes me want to cry.
Hope you can answer this or anyone for that matter. How is the brick overhang breach rectified?
You can Google it. "how to rectify brick overhang of slab". One suggestion was steel angle bars, bolted to the slab.
Scotia on a brand new floor means someone didn't plan properly or doesn't know how to undercut. We would have made them take the skirtings off for a floating floor.
21:20 what about slip blocks on the saddle trusses, especially on a tile roof
All in the report 😎.
You might have missed it in the footage, but did you observe that the valley trusses extended beyond 450 mm and a few were also lacking the support of a pair of top chords?
AS 4440 5.4.2, but we'll save that discussion for a future episode, compadre ☺️
@@Siteinspections There is so much rubbish being built at the moment, especially since covid started. I would not buy a house built 2019-2023
Also always think of the other trades as we have to work together
G'day,
Both houses: the roof spaces. Absolutely terrible, insulation all over the place.
But did anyone notice no other trades people in site. They must have been hiding under the piles of rubbish. Both of these houses will be showing signs cracking to the plaster with in 6 months.
I feel sorry for the people purchasing these homes.
The tile at 3:40 was in fact fastened in place, it had a friction fit. Oh, my mistake, that was a fiction fit.
After Watching only 4 of your videos and for someone who knows nothing about building/construction,
Its VERY CLEAR the Government needs to call for an AUDIT into all the inspectors who approve these terrible homes and have their licences pulled, (and bring in a new law that requires 2 or more separate inspections from different people/companies.
(i suspect many are being paid off by the builders,approve a bad building and next week annonymous cash payment made into account - Untraceable fraud)
Is there any accountability for the people that sign these houses off?
Licences need to be pulled and fines handed out. Big ones.
My current house (rented)has metal frames in roof. After beign up there and seeing the structure, i dont think i would build with anything else.
Saying that, the house I own has wooden trusses, but being built in 1979 has been done properly and still stands well.
I'm perplexed by the dearth of the builder's proficiency.
.
10.03, reckon grano's went wrong side of the stringline. Why i double check everything n make sure it all adds up. Also why the bricks hang over
It would be good if you can name and shame the actual building companies that build this garbage as it would act as a deterrent. This is must watch for any new home buyers.
All the wooden rubbish and debris directly against the wall are a termite concern to me especially with a veneer house. I've known similar houses to become riddled with the buggers
I hace the same front door. They dont come primed
Need to be thoroughly painted or the timber swells. I know from experience
Hi loving watching your videos. If I ever build I will definitely be giving you a call to inspect.
Have you done any follow up reviews with the doggie builds to see what the results are after they got your inspection report?
Looks like the saddle trusses are missing slip blocks
Site inspection Ninja!
Site Inspections Rapid response special tactical operations unit !
🤣
Here in WA too Bro, WA cold too I mean.
Keep up the good work. Is it possible to make the relevant codes etc you are referring to bigger during the video? Or list them in the description
Will update later today 👍🏼
I am simply… flabbergasted!
At 6:00 the chisel work for the door hinge, what'd the chippy use, a butter knife?
Question are painters using quality paint or imported non standard? Some dodgy painters are using bait and switch, they put bulk paint into 20l name brand tins and turn up on site, looks legit. As soon as you smell it OMG! It also goes on badly and provides lousy coverage.
I thought slotted gutters were non compliant in Victoria? Is it different for BAL rated houses?
You’re correct, non-compliant gutters
6:29 that abandoned site is 100% a Porter Davis job. Aim hire and Hebel is a dead set give away.
OMG and I thought Porter Davis homes were real quality built homes 😮
The steel frame maker was on Four Corners waiting to be paid.
@@larkhill2119 Yep saw that too, poor bloke was down to his last 20k in his business and was contemplating selling his house just to keep going. More integrity in that man's pinky than the former owner of Porter Davis's whole body who rushed off to a holiday overseas as soon as it got a bit too hard for the poor snow flake.
Shouldn’t there be expansion joints between the concrete paths and brick piers?
Couldn't see any timbres behind sadle trusses preventing any potential for saddles to move.
I live in Perth WA and have heaps of houses being built in the northern suburbs and I have been in quite a few that are way worse than most houses you are showing, it’s criminal how they get away with houses here !
How can you seal that eave where the tile runs into it? This is a serious question...
That bottom row off roof tiles looked to be at a slightly different angle at a few points were you showed time 25:20
Love your work, but that aluminium mesh in flyscreens is fine for BAL 12.5
You forgot to check if mesh was installed in the stink pipes and whirly birds
Brilliant work bro
As always, another awesome video capturing the shocking truth around the quality of work carried out by some ‘professional’ trades. 🤦♂️
I just had one question. Are the specification’s you detail regarding back blocking an Australian standard or state specific? I’m in SA and was wondering if the same requirements also apply here.
Thanks mate. Keep up the detective work.
the algorithm bought me a couple of days back and wow, there some seriously shoddy work out there :o
i thought id have a laugh and take a swig of beer everytime you exclaimed "non compliant!" or " OMG!".. well that ended in quick time 😂🤪
keep up the good work man
Brother any chance of you coming to NZ?? lol thinking of some renos but after watching your content just gets me thinking who can we trust!?! Love your work...be safe God bless!!
You're my favourite inspector
She’ll be right mate as they say even the mess is unbelievable tradies don’t no how to clean up after themselves
Your voice. Oh my God. ASMR shit. I think you were meant to be famous. Love your videos man.
❤️🙏
I really enjoy watching theese videos, do you have out comes of past inspections aswell ?
For any builders/plumbers out there how would they be able to rectify that ORG? To make the top of the ORG 150mm below the shower grate.
It may be as simple as cutting ORG riser down to 150 mm below shower waste, but often the ORG height can be difficult to achieve due to where is convenient to achieve compliance is not a satisfactory location from an aesthetic point of view or path of travel obstacle whilst maintaining minimum falls. It could also be as major as digging the whole sewer up and starting again. It sounds elementary, but ORG height really needs to be known and calculated in at subfloor drainage stage. The ORG is a very unassuming item, but really does stop shit hitting the fan when required.
Good educational videos sir .We need an NCC video, clause by clause and required AS for each part. Maybe 1 video for each chapter would be great to ol to educate people
Great ideas 💡
The person who issued the Occupation Certification should have his license removed.
Seems like Australia has the same issue of poor quality workmanship as we have in the UK. Time for new build contracts to have a retention clause to withhold full payment from the purchase price until the completion of all defects and non-compliant work. This needs to be a Federal and Government statutory requirement for it to work.
The problem is you are paying $450 a week in rent and a mortgage on your uncompleted new home. Although this case looks like pure fraud in my opinion as it is impossible to move in. Are any prosecutors out there with enough gumption to take on the corruption?
@@larkhill2119 It should be the State taking action here on behalf of the purchaser. and preventing this developer from ever working in the industry again.
I thought you where at mt hotham :)
1min into this and seeing the mess in the background - like a bombs gone off
episode of HORDERS
6:26 MAY BE THE BUILDER IS COLLECTING SCRAP METAL
17:12 “kids will like it”
This cracked me up 😂
You missed out on the driveway. It looks like they used 75mm forms on a 100mm slab. That is non compliant with the A.S.
No battens at the base of those saddle trusses either.
I find it amazing the plaster it attached direct to the roof trusses where are the battons for the ceiling ??
Is there a reason why you some times go on the roof and other times you use the drone? Is it a wind/safety thing?
What's the difference between building surveyor and inspector.
12:13 The air conditioner might be too close to the wall depending on the brand but normally 150mm minimum. Blockage of the rear vent will cause high gas head pressure and compressor failure. The warranty will be declined by the manufacturer even if the fault may have been a normal failure.
i think the drain terminations are more of an issue
The main reason why dumping rubish has again become a problem, is the exorbitant costs that councils have put on the tips these days.
Love your work,
That's what happens when the fascia and gutters go on before the brick walls are built. They have to adjust the cavity of the walls to line up with the fascia
By no back blocking inside the roof, do you mean there should be wood across the seam to secure it more?
You need to place plaster over the plaster joins in the roof and they must span from joist to joist....I think 😂
As above, stops the ceiling from sagging and lasts longer structurally.
Hi….what about independent building inspectors which builders use for their jobs… I called my inspectors and they said any issues will come on them and not the builders … not sure who to trust now after looking at this :( … I was only planning to do a final inspection at the end due to the costs involved… will final inspection be able uncover all issues ? Structural and compliance ?
So what is the story with no weep holes in the brickwork?
How are they getting OC’s?
How cold is Victoria cold.. asking from a building washer
Great video exposing these poorly built homes.
What a complete sh.itshow the construction industry has become in Australia. The Government has to clean up the construction industry, but don’t hold your breath on that happening any time soon.
Reminds me of a house I built in 1986 nothing has changed in the volume builder business.