Been watching for going on 2 years now love this channel. Came across the electric tape on the thumb the last 2 posts. I am 58 years old and that right there cracked me up. Thought I was the only one that uses that when hurt.
Andy, we always use the pipe thread paste then wrap that with teflon tape and then pipe thread paste again on top of the Teflon tape. Best solution I've ever found for sealing threaded pipe.
New freight shaker looks nice. We run those plastic fenders too although ours came with round pipe type mounts. I think yours look a bit nicer and probably a bit better. Only thing I don't like with those fenders is stones stuck in the duals tend to come out and break holes in them. That might just be a user error on our guys part, bunch of steering wheel holders
Hi Andy ! Good work in the shop for everybody ! Good job Andy whit your crew ! . Thanks Andy for your time and everybody have a good day at the farm ! 🙋♂️
@@FarmingFixingFabricating I told him you had a RUclips channel that I knew you from watching all your programs. He didn’t know what to say. he said he lives on route 31 somewhere around Jared’s place.
Are you going to put a sand reclaiming system in with the new buildings? I was wondering how much of a cost of one is and if there is a large enough of a cost savings not hauling out sand and buying new sand. Great video.
HI ANDY I GET THE FEELING THAT SARAH WOULD LIKE TO TELL YOU WHAT TO DO WITH YOUR CAMERA/ COME ON SARAH YOU ARE A BEAUTIFUL YOUNG LADY LETS SEE YOU SMILE OK MAKE DAD HAPPY SAME GOES TO ALEX CHEERS LADIES.
IMO, Andy has #1 YT farming channel........When I get home from farming each day, I check YT for a new episode of FFF
Lol! Me too!
And the larsons are second maybe first but less uploads
Andy you have some great skills, and a excellent crew.
Andy you sir are what makes this country so great. Work hard, knowledgeable and yet being a great dad. Love your videos. I learn alot just watching
Been watching for going on 2 years now love this channel. Came across the electric tape on the thumb the last 2 posts. I am 58 years old and that right there cracked me up. Thought I was the only one that uses that when hurt.
That one ingenious repair on that pipe.
I am a new fan for your channel i am from Pakistan i like your videos and you share good information and also work good thank for sharing knowlegde
Thanks for the update. If there’s no interest I’ll hold whatever steering wheel you tell me to.😂
Did anyone notice his management style, with mentoring the sleeve repair, excellent
I used the 3M on body panels on school bus. The panels were assembled from factory with this stuff. Had to chisel the panels apart. Good stuff.
Great video. Nice job Sarah. We miss your smile. Hang in there, chisel plowing season coming soon.
Andy another great content as always. Keep them coming. Seeya at the next one. Stay safe!
Good idea on the glue for the fittings. Nothing worse than a leak when you fire up
Another great video Thanks Andy.
Andy, we always use the pipe thread paste then wrap that with teflon tape and then pipe thread paste again on top of the Teflon tape. Best solution I've ever found for sealing threaded pipe.
Enjoyed your video have a great day Andy and all.
New parlor keep advancing family getting more involved is a beautiful thing we all love your family values see you soon the fly guy 👍
Great video impressive looking Rig .
Great video as always Andy
Thanks for your time and consideration top job top team awesome regards from England 🇬🇧🇺🇲🚜🚜🚜🚜🚜🚛🚛🚛🚛🚛
That is a great looking truck!
Try 545 Loctite on your pipe fittings on hydraulic systems. It's designed for that purpose and I've had really good luck using it.
Well done guys .
Panel bond is the cats meow….Thanks for the video Andy
Great job Andy on keeping the fleet running an the new truck hydraulic
System 👍🚜
New freight shaker looks nice. We run those plastic fenders too although ours came with round pipe type mounts. I think yours look a bit nicer and probably a bit better. Only thing I don't like with those fenders is stones stuck in the duals tend to come out and break holes in them. That might just be a user error on our guys part, bunch of steering wheel holders
Another very interesting video Thank you Andy 😊😊😊😊😊
Hi Andy !
Good work in the shop for everybody !
Good job Andy whit your crew ! .
Thanks Andy for your time and everybody have a good day at the farm ! 🙋♂️
You sure have the best daughters in the world.
Your a lucky dad.
TAKE CARE ALL !!!
The sand in the liquid manure is sure abrasive on your equipment
Fenders will be nice to keep the back of the cab cleaner but looks funny with the way they sit with the mud flaps looking good
I use there panel bonding adhesive fairly often too, I even used it on my iwatch when it came apart, dries kind of slow though
Nice truck!!
I ENJOYED WATCHING THE VIDEO ANDY 😊
And another great video I was down in your neck of the woods today at omag wire and your name came up
My name came up?i hope all good talk
@@FarmingFixingFabricating I told him you had a RUclips channel that I knew you from watching all your programs. He didn’t know what to say. he said he lives on route 31 somewhere around Jared’s place.
Andy, Thanks for de video😊
3m panel bond is amazing and has a million uses
Sarah and Alex need to smile more, they are smart and pretty..not to mention probably the hardest working ladies in NY>
Are you going to put a sand reclaiming system in with the new buildings? I was wondering how much of a cost of one is and if there is a large enough of a cost savings not hauling out sand and buying new sand. Great video.
Dam good job sod buster
i want to see the cows and the milk tank, you cant beat the smell of milk in the tank
Good video Andy 🚜🐄🇺🇸👍
Andy, have you tried Loctite 545 Pneumatic/Hydraulic Pipe Thread Sealant? I have with pretty good results.
Swak is a good product. Good up to 30 mpa
With the panel adhesive, how hard are the fittings to disassemble, clean up and reuse?
If you start Teflon tape 2 threads back from the end of male fitting, you should be just fine
Teach them girls to smile LOL
Hi there do you guys still have the blue western star Cheers for the videos
I like how Sarah is always as excited as I would be to be on camera😅
Is this the truck Sarah is going to use to take her Farm F endorsement road test? And nice black tape band aid. What did you do?
👍
Teflon tape isn"t mean"t to be used on petroleum carrying fittings. Use pipe dope, that has a little brush.
I’ve actually had better luck with the tape than the brush on stuff
Poor girl just don't seem happy 😢
Sarah or the truck
Sarah never has a lot to does she. Lol. At least in front of the camera😊
HI ANDY I GET THE FEELING THAT SARAH WOULD LIKE TO TELL YOU WHAT TO DO WITH YOUR CAMERA/ COME ON SARAH YOU ARE A BEAUTIFUL YOUNG LADY LETS SEE YOU SMILE OK MAKE DAD HAPPY SAME GOES TO ALEX CHEERS LADIES.
Sarah is so shy
Is there a reason why you didn't clean the metal before you tapped in the bike? Farmers!
Tapped in the bike?
Might be hard to get a pretty girl to be enthused about hauling manure!
Andy girls are beautiful, would love to come help you farm. Just need a place to stay.
I think Sarah is not a happy equipment teck what would make your girls smile a little
Sarah seems miserable, maybe it's just the camera.
Drug (cigarette) addict alert