Making Trike Monster 600cc 86HP on Fat Tires
HTML-код
- Опубликовано: 6 фев 2025
- The frame of this 1992 Suzuki GSX 600F (Katana) came from a donor bike. I bought it in the condition you see in the video, along with a useless fuel tank and cracked plastics. I had to source the engine and other components myself.
For the drivetrain, I used a differential I built in a previous project. It was originally meant for a different build, so I had to extend it to fit. I mounted 15-inch wheels with a 9.5-inch width and a deep lip, inspired by classic BBS rims. I fitted them with 225/45 R15 tires-I wanted wider ones, but they were too expensive.
Despite the challenges, I'm really happy with the result. The trike rides great, accelerates well despite the added weight, handles smoothly, and takes corners like a champ. Riding it is pure fun! 😃
La qualité de fabrication de l'essieu arrière est impressionnante 🥇🙅
Badass Trike nice build
You are a genius sir !
Długo czekałem na ten filmik ale warto było! Super👍
Don't care what you say about this one. It's pretty badass! Nice work!
Great build!
Hello mister beautifully made good job well done
Incredible build! Thanks for sharing!
Uwielbiam twoje filmy. Jesteś najlepszy. Przesyłam pozdrowienia z Czech.
Nice job man !!! I love it ... Really i love it 🎉🎉🎉🎉🎉
Thank you 😁
Really really cool 🏍️🤩👍
Super gut 👍🤣🔩🔧
The Big Monster! 😉
Excelente trabajo, Excelente Nivel
Cool project! How much work is it to get the speedo working? (Cable or electronic) 👍
Great video ❤❤
Отличная работа.жаль материал не качественный.я имею виду подшибники. долго не праслужат.не расчитаны они на такие обароты с такой нагрузкой.Ну это на Ваша вина.по вам и вашей сборке вопросов нет.все на отлично. Убачи бро.
Ah yes, the TRIKE - (all the disadvantages of the car combined with all the worst parts of a Motorcycle without ANY of the advantages of either!) Brilliant! Who needs a speedo Cable for something that was only built for one video and will never be ridden again?
Felicitaciones.
Gracias 😁
Que belleza. Me gusta mucho esa de 3.R
Gracias 😁
👍👍👍👍👍👍👍
I love projects that are completely pointless
Show de bola
Quanto custa um trabalho desse? E só para fazer a parte de traz da moto? Isso a Moto sendo do cliente.
У нас в школе "трудовик" не подпустил бы к станку с верёвочкой на поясе. Намотает в секунду, даже Мама сказать не успеешь ((
This almost pisses me off! I don't know what to think! I've never seen a trike I thought looked sexy! I'm so confused! 🤣
Классно получилось , жаль , что в россии такое не возможно .
It was 86hp, but now it has all that weight at the rear end. It is about 50 hp
Why is it all of you who do this on youtube NEVER clean the bikes before starting the project. So stupid.
But how you make it ? It's expencive ?
cool looking but bad idea all over
Fajny projekt i wykonanie tylko nie rozumiem sensu budowania pojazdu, tylko po to żeby nim jeździć po podwórku, bo raczej nie przejdzie to przeglądu, aby móc go zarejestrować i pokazać się na przykład na jakimś złocie.
That engine is struggling. Sounds like both some misfirng and incorrectly tuned carbs.
600 is little
little to much 😂
This is really close to the off road 3-wheeler I always wanted but I wanted the design where you're seating really close to the ground relative to drifting trikes cept they're off-road ATVs.
I also remember the ones that were banned in the 80's after a kid in town rolled his in a field with super high grass where he suffocated and died underneath it while heaps of traffic drove by and no one could see him!
*Soon after, they were made illegal by the DOT.*
Man wanted to build a workshop, but he overdone it and even built a polish streetracing league. Show him your respect with likes 🫡
Thank you 😁