Get your own coil over kit atreklez.com/products/2007-2017-silverado-sierra-rear-coil-over-conversion-kit-single-ext-crew-cab FOLLOW US ON INSTAGRAM reklez_suspension_works
I lackent your virios bbaby i lovu soy moch hony 33your my dog bul foldor canet wis my colmi plis bbabby +19565290922 patricia ramirez wasttoop i wil soport and chir for you bbaby 😘😘😘😘😘😘😘😘💍💋♥️😍💗💗💞❤💘 am singol you or singol
To do a complete air ride setup in your truck, the right way, is not the cheapest thing you can do to it. Driving around at stock height let's face it, it sucks. To have a kit that you can get your truck out of the clouds and into the weeds AND use almost all of it when you go to air bags is just awesome!! Its like your splitting up the cost of air ride without using a credit card LoL
If you plan to use our coil over kit you can use either max lip or reverse lip for the the rear. That is what they are called. For the front get them 9" wide no matter if its 24s, 26, etc. and you would be fine. Normally tire/wheel shops know what wheels work with what suspension.
Well I just planned on doing a 4/7 or5/9 I live in Chicago so we only get a couple moths of cruising time so the rest of the months truck will be put away how much is the kit it’s a 2017 Silverado single cab short bed
ive got a 2014 Silverado regular cab short bed, with a flip kit on the rear and it rides like crap . it has drive line vibration between 65-75 . would this kit ride smoother than leafs.
Reklez Suspension Works ok thanks can't say I'm surprised, I guess nobody wants to touch the rear suspension on the 4 door obs Tahoes..even the C notches have to be one off apparently
Yo, another pro with the two piece drive shaft is these stock aluminum drive shafts are garbage, thin walled with cardboard inside..they’re rated at 90mph and there’s hella videos of seeing a stock aluminum DS in sierras and Silverado’s blow out at mph above 90…I know my 18’ governor is at 90mph and I took it off with a programmer and let me tell you it gets scary at 90-95+mph shaking vibrating etc …. I bet their two piece is hella stronger and rated at at least 100-1200mph
You sell the 07 - 13 kit for 795 which is cheaper than beltec but you use hangers. Hangers are a nightmare to install. Why not just flip kit and shakles for up to 6" rear? That why we dont have to drop the tank, and f## with those hanger rivets???
How much for you guys to install wishbone,accuair elevel, bags, and everything necessary to be able to lay frame? I currently have a 03 scsb silverado stepside on a belltech 2" drop spindles 4" flip kit no notch. Price for parts and labor?
Get your own coil over kit atreklez.com/products/2007-2017-silverado-sierra-rear-coil-over-conversion-kit-single-ext-crew-cab FOLLOW US ON INSTAGRAM reklez_suspension_works
Reklez Suspension Works can you do a vid how to put on hd bumper on a 07-13 silverado
Price?
I lackent your virios bbaby i lovu soy moch hony 33your my dog bul foldor canet wis my colmi plis bbabby +19565290922 patricia ramirez wasttoop i wil soport and chir for you bbaby 😘😘😘😘😘😘😘😘💍💋♥️😍💗💗💞❤💘 am singol you or singol
One day goals for my 21 sierra
What size tire on that 26x12?
What are the name of thoses rims
How much to get a 03 chevy
Done like that
To do a complete air ride setup in your truck, the right way, is not the cheapest thing you can do to it. Driving around at stock height let's face it, it sucks. To have a kit that you can get your truck out of the clouds and into the weeds AND use almost all of it when you go to air bags is just awesome!! Its like your splitting up the cost of air ride without using a credit card LoL
What’s the name of this wheels?
Great video. Very detailed & well explained walk-thru. Do you have a video on how to shorten the rear axle to for wider rims?
will the coil over version with the smaller notch fit under the bed without cutting the bed. Im at 6 inch drop now and I dont want to go lower
Clean work as always! I like the long vids better, covers alot more.
Thanks appreciate it!
What size drop is this truck front and rear ?
Do coil overs drop the truck more or less than control arms? How low would a 8/12 drop on a 2014 Sierra single cab on 26s be?
Do you guys sell the coilover kit for an OBS ?
Would you need to do a coilover conversion in the front or can you only do it for the rear?
Do y’all make these kits for 4gen rams ?
Is there a coilover kit for an 89 c1500 regular cab short bed?
My ? Is kinda off the subject but do u know the specs on the rims I want to order mine soon but not sure on how to order them
If you plan to use our coil over kit you can use either max lip or reverse lip for the the rear. That is what they are called. For the front get them 9" wide no matter if its 24s, 26, etc. and you would be fine. Normally tire/wheel shops know what wheels work with what suspension.
Well I just planned on doing a 4/7 or5/9 I live in Chicago so we only get a couple moths of cruising time so the rest of the months truck will be put away how much is the kit it’s a 2017 Silverado single cab short bed
What drop is in the front?
joan peralta 4"
Were u guys located
Will a installation guide video been in the works on how to measure everything and weld it
We can provide you that information with the purchase of our kit.
What type and brand wheels are these 26’s?
I have a quick question, for the 99-06 silverado or sierra, can you do a 4/6 drop without doing a under bed notch?
You don't need a under bed but do need a notch. (hope that makes sense
I messaged you on Instagram a long time ago about doing my 2021 ram.
ive got a 2014 Silverado regular cab short bed, with a flip kit on the rear and it rides like crap . it has drive line vibration between 65-75 . would this kit ride smoother than leafs.
This kit would be way smoother. But there are faster/cheaper solutions to your problem. Calls we would be glad to help.
nice work very clean, do y'all make a wishbone and coilover setup for an OBS Tahoe?
No that won't be a kit we will be offering. Just no enough ppl requesting it.
Reklez Suspension Works ok thanks can't say I'm surprised, I guess nobody wants to touch the rear suspension on the 4 door obs Tahoes..even the C notches have to be one off apparently
Great video homie! Keep doing your thing
Thank you!!
How much is this kit for a 05 gmc sierra and a monster notch with labor
Call us for prices (832) 770-4366 Thanks
Yo, another pro with the two piece drive shaft is these stock aluminum drive shafts are garbage, thin walled with cardboard inside..they’re rated at 90mph and there’s hella videos of seeing a stock aluminum DS in sierras and Silverado’s blow out at mph above 90…I know my 18’ governor is at 90mph and I took it off with a programmer and let me tell you it gets scary at 90-95+mph shaking vibrating etc …. I bet their two piece is hella stronger and rated at at least 100-1200mph
To fit the wide wheels do you need to narrow the diff with this set up?
Anything over 5 inch lip usually needs the diff narrowed in my experiences..
NateDougie602 yes narrowing the rear end is needed
Do you do this for 96 silverado single cab? I want to go with 24x12 on but I dnt want to cut the bed lmk also do you shorten differential
You sell the 07 - 13 kit for 795 which is cheaper than beltec but you use hangers. Hangers are a nightmare to install. Why not just flip kit and shakles for up to 6" rear? That why we dont have to drop the tank, and f## with those hanger rivets???
Quick question, I have a 2011 crew cab Silverado and want to do a 4/6 drop with coilovers do I have to cut the frame ? (Rather not cut the frame)
How much for you guys to install wishbone,accuair elevel, bags, and everything necessary to be able to lay frame? I currently have a 03 scsb silverado stepside on a belltech 2" drop spindles 4" flip kit no notch. Price for parts and labor?
(832) 770-4366 For Prices. Thanks
The videos are perfect don't change a thing
Thanks for the support
You guys sell lift hangers 1 or 2”??
Where is ypur shop is it around Houston i want a under bed notch
Pearland, TX. Google us to get a map.
What kind of notch do you guys recommend for a crew cab silverado on a 4/6 drop? Haven’t gotten a notch kit when I got it lowered.
More info please thanks
Dope ass work looks clean af
So sick
That’s one Badass truck
ABSOLUTE ART!!!!!!!!!!!!!!
Nice looking trucks like always 👍
Everything looks good like if the truck came like that,,
Keeep here vida coming 🤙💪
Hella sweet......
like it, but you gotta delete those headlight inserts!
How much was the rear end cut to fit the 26x12?