Newer Ford F-250 F-350 Body Mount Bushing Replacement 2008-2014
HTML-код
- Опубликовано: 10 сен 2024
- AutoRex is now on Patreon! It provides a tier through which you can ask me automotive-related questions through Discord. Thanks for your support! / autorex
Disclosure: This site contains affiliate links for which I may be compensated. As an eBay Partner and Amazon Associate, I may be compensated if you make a purchase through these links.
Buy the cheaper and better alternative to Ford OEM mounts here: amzn.to/3E3H7TQ
Use this kit if you need to also replace the bolts: amzn.to/3GOyKgC
The basics of how to replace the cab mounts on your Ford F-250 or F-350, and what to avoid.
Against my recommendations, The owner of the vehicle wanted to go with OEM Ford mounts. I highly recommend against using these because they will fail again in the same short order as the old ones.
Quick, to the point, and thorough. Not 9 hours of talking about your trip to see you mom at her hillbilly mountain cabin and how you got stung by a bee and found a pull tab from a Pabst Beer can at the rest stop on the way back. THANK YOU THANK YOU THANK YOU!
And not to mention how he Wore and used the Pabst pull tab as a ring with a built in nose picker
Now, this is an instruction video!!! Quick and to the point. No unnecessary talking or distraction. A lot of these how-to videos go on for 30+ mins sometimes.
And play stupid music
After extensive research on this, as I plan to perform this repair on my 2011 F250 soon. This is the best video on RUclips.
WHICH KIT DID YOU GO WITH?
Just changed mine today. I bought the S&B mounts. Seemed to have the best reviews and I like the lifetime warranty. I sprayed all the mounts with PB Blaster about a week and a half before I changed them. Not sure if it made a difference or not. I heated most of the bolts with a torch for 1 min...they all came out easily. Hell, they were so easy, I tried a few without heat and they came out. Prying the OEM ones off wasn't too bad. The only ones that were a pain were the middle ones that are actually made of rubber (not with birthday cake like the others). I removed the driver's side bolts first and then loosened the passenger side bolts before I lifted the driver's side. Then repeated that on the passenger side.
TIP, when you pry on the middle ones...rip off the rubber boot on the bottom part so you can get a pry bar on actual metal instead of the boot. My prybar kept slipping off until I removed some of the rubber.
I used about an 18" 2x4 and a 3 Ton jack to raise the cab. I put the 2x4 about 8" away from the middle mount (in between the 2nd and 3rd mounts, starting from the front) and it raised the entire cab high enough to get all of the mounts out. You may have to give it one or two more pumps to get the front mounts out by the radiator.
Installed the new mounts and then torqued them down to 76lbs. I'll drive it tomorrow and tell you what I think of the S&B mounts!
Wanny what did you think of your S&B body mounts on your truck? Thanks
Wow didn’t realize instructional videos like this existed anymore. well done.
Funny, just checked the mounts on my 2002 F-350 crew cab 4x4 7.3L, yep, still good. No noise, bumps or squeaks . 440,000 miles and rollin’!👍👍🇺🇸🇺🇸
2008 F-250 SuperCab/Lariat- Mileage 124,450 . I had one Bolt Cage break free at front left underneath Radiator after following all precautions and not using an Impact and only a Breaker Bar. I left that one the way it was and will sick a trained Mechanic on it at some point. I had heard about squeaking on the DayStar replacements and applied White Teflon Grease at all Metal contact points on the OEM Bell that meets the Cab and the bottom piece. Make absolutely NO MISTAKE this job is a PAIN IN THE ASS ! The Bolts are very difficult to remove and replace. Do yourself a huge favor and put a Torch on every Bolt for at least a minute possibly longer before unthreading because you'll probably never unloosen them because of the Blue Lock Tight and for Christ's sake keep a Fire Extinguisher close by . Bolting them back in is a LITTLE easier but still a major pain in the ass ! Count on a minimum of 8 hours of labor if your attempting this project solo I don't care who say's differently. I have any and ALL the tools necessary to do this job except a Lift. The hard work paid off and is a completely different Truck. Even the front Cab Mount that the Nut Cage broke didn't make a sound and rides and handles 100% better. The moral to this story. USE TEFLON GREASE and don't listen to someone's inflated Ego about how fast they did the Job ! Regards ,
Show less
Hey buddy I have a question for ya. How is the ride now compared to the factory bushings? What I mean do these aftermarket bushings ride as smooth as the factory ones when they were new? Why I'm asking is because I was told that they are made from stiffer material so the ride is a little ruff. Do you feel a big difference compared to the factory bushings?
Thanks so much for the video. You make it look much easier than what I am experiencing. I have a 2011 F250 Quad Cab. I heated the bolts to deal with the locktite, but they were still extremely difficult to take off. The bushing behind the front seat still had a lot of material left and started to catch on fire after 30 seconds of heating and then felt like the nut was spinning. It was hanging up on something and not coming out. I tapped it with a screw driver from inside the cab and it popped right out but the bushing isn't coming apart. There is less metal to pry on than the other three. I'm still working on the front one on the passenger side. With all that said, I still found your video helpful.
2008 and both of my front mounts spun the top nuts out despite my being patient with a torch. They both freed up initially but spun out a few rotations later (breaker bar). I removed the headlights which gave limited access but nothing I could jam or wedge in there was enough to hold the nut. I resorted to reaching in with a mig welder and tacking up the one side I could reach. That worked. Good luck
The absolute body mounts are by S&B Filters. Well worth the extra money. Much better ride. Lifetime warranty and a much superior mount by far than all others ensuring the best chance to not have your radiator leak and crack again.
Lord! This is a P.I.A.
Looks pretty simple and easy to do. Simple is true, easy not so much.
Can’t say that heat seemed to help much. Soakings with PB Blaster did. Plan on using a 1/2 “ drive LONG breaker bar and a whole bunch of effort.
Those caged nuts are p.o.s.. I had two spin. Went inside through holes in the floor. 22mm nut size. Well that worked out for one of them, totally rounded the head #2 passenger side. Probably the result of using 12 point socket.(. Hint: use a hex socket, 15 mm) Bolt extractor further rounded it.
Now I am preparing to cut the “ head” off of the bolt and then reach into the hole in the floorboard to cut the cage of the nut enough to pry it out of the way and then lift the nut/ bolt stem out from inside.. Then I will put the nut in a vice to work out the stem.
Just really glad that this only happened on one of the six bolts on my truck. I have already ordered all new bolts.
In retrospect: (1) Get out the 1/2” drive tools, as you can easily break the 3/8”. I trashed three ratchet handles. (2). Go ahead and pull back the carpet, open up the rubber plugs in the floor pan and throughly apply liquid wrench or whatever to the nuts and bolts. At least you’re ready should a nut spin. (3). Be patient and apply it several times, and give it time to work. I feel like this really makes a difference, as my front ones were the easiest of all due to my spraying the exposed nuts under the hood at the start. Laziness helped the other ones teach me a lesson.
Once the bolts are out the hard part is over.
Dude you just save $500.00 bucks that the mechanic wanted Thanks !!!!
Thanks for the video...I see my Ford van mount old and cracked... wasn't sure how to change it... very good tutorial!
Thanks for the informative video, well done. Just replaced mine on my 2012 6.7. I went with the Ford replacement mounts. I got 6 sets for $413 thru our fleet shop at work. They came with new upper and lower cups. I have a 6" lift on 35 mud tires and it made a huge difference in ride quality. I read too many reviews of the aftermarket mounts with harsher ride, squeaking and clunking due to the terrible fitment issues. I wasn't about to put in a part with a huge gap that DOES NOT FIT. Also, why put in a hard poly mount, it would be the same as having a bad stock one as far as ride. I replaced 6 of them as the 2 are rubber and were fine. 2 hours time in my driveway with a friend and using a jack. I was surprised how easy it went. I have a clean Florida truck. I followed your procedure except for using a jack I loosened one side up and did the other side.
Where did you get the rubber bushings? I can't find them anywhere.
I really apreaciate how you went into detail about the nut inside the cab mounts keep up the good work i hope you keep making videos i am a subscriber from here on out.
Great video. Not to much talkin, and clear instructions.
GREAT JOB BROTHER! BEST INSTRUCTIONAL VIDEO I REMEMBER SEEING IN COUNTLESS YEAR. KEEP UP THE GOOD WORK!
Great video. Looked so easy even a Simpleton like me thought he could do it. 2009 F-350 diesel 2wd long bed. Got some bushings, bought a torch, sprang for a new jack, had tools. Got the 6 point 15mm socket, heck I'm ready for the attack! Heat the first bolt up driver's side by radiator. After 25 seconds something is smoking. I stop let it clear. I think it's good to turn. I should have applied heat for the full minute. Got me bring Breaker Bar. Moves a wee bit.
Later I apply more heat. Same thing, smoke. I don't apply anymore torch heat. Thinking that was my error. You warned us! Wrenching carefully, then the thing breaks free. Yay! BUT trying to spin it out it meets resistance again, and then breaks free, and resistance, and an endless cycle. Will not retract out even the slightest bit. Bummer. It must have spun the cage nut. Having a tough time this Sunday morning July 2. Can't find where or how to get something down there to stop that nut plate from spinning. Hate it when this happens. Any guidance appreciated, I will try to return the favor.
Did u get it?
@@hman962 : Well no I did not get it. But I was smart enough to beg my mechanic into doing the job on the whole truck. He was the one who identified the problem and told me to get new bushings. He said it was a pain. I paid him more than he asked. Least I could do to say thank you.
It's a heck of a job, very frustrating and dangerous. @@horacesawyer2487
which one did u try first?@@horacesawyer2487
Great video, I just bought one for now, up front by the radiator, I don't want any problems so I'll soak it with free all for a week first.
Great video: quick, easy, clear, listing tools and procedure.
Great video! Poorest Ford Frame Insulator in my lifetime,,,i'm old.
Smart move Ford, install bolts from the bottom on later models,,,duh! I have to pull my back seat :o(
Great video, you made it look supper easy in 2:30. 👍🏼good job
Hey bro, thanks you saved me a lot of headache.
Best step by step video. Thanks for the help.
06 f250 here. Under the truck today and noticed a lot of the mounts just had a threaded stud with no bolt head Others had a bolt head like show on your body mounts. Im kot sure if they are missing something. Doesn’t look like a bolt head is broke off at all just a long threaded bolt going down
Just did this on my 2011 f250. I didn't have a lift so I used a jack. If you lift the cab right after the 2nd mount by the front doors it will give you clearance for all 4. I did one side at a time. Only 2 of 8 came apart. I had to saw the others out. Took me 6 miserable hours by myself but I am a plumber not a truck mechanic.
The "Trick" is to leave about half the bolt in the bushing (to protect the threads) and wack it with a 3 lb hammer, they knock the bottom plate right out and you can continue to remove the bolt. Then work the rubber (It will still be in useable condition) off and slide on the new bushing.
2012 Supercab here. I want to replace my four cab mounts but not the front mounts. The fronts are rubber and appear to be fine. Do I have to loosen the bolts for the front mounts before jacking up the cab?
Thank you I'm about to change my mounts 👍
I have a 2014 F250 with a reading work bed. Will the mounts in the link work? Is tbe process the same with the work body?
Thankx very helpful an good details on how to do it
I need to change both on the 4th position can i get away with lossening just those and lift the cab to replace them or do i have to loosen all of them
Thanks!! Why use the blow torch?
How many Bushing You need to replace? I see they selling them as 6 and some 4 as Kit
you ever fight the issue with the wheels not going back to center after a turn? had ball joints done, tie rods, track bar, like 5 gear boxes and still nothing helps.
What brand do you recommend when replacing these bushings? I am wanting to replace mine on my 2009 f350.
Did you make the bushing repair? Any issues? I have a 2009 F250 that I want to make this update. What brand did you buy?
my truck has been making an odd popping noise, noticed tonight that that back right lower insulator bolt is just completely gone. Getting a new one tomorrow, think this could be the source of my popping?
Do all the body mount bolts need to be removed in order to just change just the front 2 body mounts. To be more clear I just want to replace the front two body mounts will I be able to lift the cab without releasing the other mounts
good video No BS just instruction 2 thumbs up
Well done brother. Thanks for the video.
Nice video, thank you very much, it was very helpful.
What size are the nuts to the mount bolts ? I have a 2008 6.4 and the front mount bolts turn with the bolts when I try to take them off.
Thanks men .. hi from sandiego c.a... I have a F250 Ford
Great video! Thanks for making the seemingly difficult seem easy. Question: For a stock 2010 F350 long bed SRW, do you have a preferred bushing you use? Could/would you recommend one? Thanks in advance. Keep up the good work--Subscribed!
Great stuff… couldn’t find the KEVLAR version of these mounts though…
What size is the nut in the cage? i need to put a wrench to hold backup
I would use silicone body mount bushings instead of the polyurethane bushings you suggested. The reason why polyurethane is organic and will break down whereas silicone is inorganic and will be more durable. My 2 cents.
AutoRex....I ordered the Dorman parts today to do only the front bushings on my 2008 Ford F250 at this time.....I have been looking at my truck and it looks impossible to get to the nuts behind the foglamp area....are they cage nuts and don't have to get a wrench on them, or will they spin when trying to remove the bolt from underneath? Also looks like Dorman sends all new parts so if I have to cut the bolt off, will be covered....haven't tried loosening them yet.
Many Thanks for your helpful video....Mark in TX
You probably have already done this job, but for those wondering, the front (radiator) bushings have caged nuts on top too and it's super easy to bend those cages. You will hate yourself if you do that.
I replaced mine while I was doing all of the radiator work (common failure; replaced with Mishimoto on my 2008) and I ended up having to cut the bolt out with a reciprocating saw (Diablo carbide tipped metal blade is worth it).
I have now looked at all of these bushing and they are in varying states of needing replacement.
Taking your time, you could get all of them done in a Saturday afternoon if you don't encounter major issues (like a bent cage, setting your truck on fire, etc.) and have all the tools and parts ready to go.
This has to be what's making the tapping noise under my driver side floorboard.
Great video, am a weekend warrior also without a lift, how long does it take an average person to complete this project? keep up the great work and keep the videos coming!!
+Miguel Angel Thanks for the comment! You should be able to get it done in under a day as long as the upper and lower mounts are not rusted together. The two front mounts below the radiator are the most prone to rusting, but I've never encountered any that could not be handled with a large crowbar. If you think they're gonna be trouble, soak them heavily with PB Blaster. Good luck!
Thanks for the video it helped out great.. I replaced with Daystar and regret it because they are way too hard. I even replaced the shocks with Bilsten and the ride is horrible. I'm even getting a clicking noise when I hit some bigger bump, it's could be because the daystar mounts are much smaller and might be shifting in the metal housing. I thought about replacing them with Dorman, but I'd rather go back with Ford so I can get a stock ride again. Can you please list the OEM Ford parts so I can find them online at a cheaper rate than the dealership (2010 F250)?
How did the replacement go? Is the ride better?
Is it true that you can only remove one side at a time when replacing them?
My Lincoln Navigator 2007 is having same issue. All mounts are gone. THANKS FORD! Now I'm searching for a kit that provide all body mounts for my monster but I couldn't find a "good" source to supply all. Reading the diagram from Ford looks like my car will need 3 types of mounts. Any advice on how to get the set will be appreciated. Great video!
What’s the best way to remove a broken bolt on the driver side
Can the cab mounts be replaced without having to remove the front mounts? My front mounts seem to be ok.
Yep, you can also leave in the "Third" middle one as it's rubber not foam.
But there's no reason too since The "Trick" is to leave about half the bolt in the bushing (to protect the threads) and wack it with a 3 lb hammer, they knock the bottom plate right out and you can continue to remove the bolt. Then work the rubber (It will still be in useable condition) off and slide on the new bushing.
Had a question for you, I have a 2012 also , and the mechanic told me not to get the poly ones get the original ones but don’t want to , which ones do I need to get , thanks for your help mine needs to be replaced badd !
I got the S&B mounts
@@wanny07 hello how do they feel on your vehickle
@@speckledtroutfisherman1619 Drove about 100 miles today. They are pretty sweet. Got rid of the creeks and pops I was having. I have only owned the truck for a few months. So, I don't know how they compare to the feel when the originals were brand new. But, it was a great ride, the won't fall apart in 3-4 years like the OEM and if for some reason they do...they have a lifetime warranty. Can't go wrong with them in my opinion!
Well described, thankyou
What about the blue torch. Seen it in the video. How long you heat them before trying to remove them
Buen dia , y en vez de usar antorcha de fuego, se puede usar uv40
Q: anyone know of a recomended order of replacement? I would think do one side then the next.
Just the video i was looking for. I was quoted 600 to have them replaced from a local shop. And 900 from ford. You mentioned a link for the mounts you recommend, but I can't find the link. Ok so I did find a link for bushings, it was an eBay link. You mentioned a Amazon link. So because I have a 2009 f350 superduty, do I have to remove the rear seat? Thanks
Did you replace them with stock rubber mounts? If so where did you get them?
After viewing several videos I still am uncertain if I have to go from the interior side to unfasten the bolts. Some show it being necessary and this one says you don't have to access from the top?
I guess I'll find out once I begin the work!
I feel the same. Did you give it a try? I have a 2009 F250 and might give it a try.
@@michael4962 I have completed the change out. No problem with the 4 rear bolts, only the front 2 at the radiator slipped. I made a wrench to fit the top nut to hold it in place. It worked well. Only hand tools and go slowly. They shouldn't turn.
laverdadesmejor Thank you. Take care
How did you get the two front bolts near the radiator loose? The cage nuts are just free spinning on my 2012. I've almost stripped the bolt heads out. 😡
Sometimes you have to wedge a prybar up inside the core support between the nut and the sheetmetal. There should be an opening in both sides of the core support to allow this. Also. Soak the bullshit out of them with PB Blaster.
So I have a 2010 F250 (6.4l PSD). I don't have access to a lift which seems it would make the job much easier. Can it be done? And just to be certain...you don't have to do anything on the inside of the cab? No need to pull carpet or anything? It can all be done from the bottom?
How did the replacement go? Remove carpet or all done from below? I have a 2009 F250
@@michael4962 Four Wheel Parts did the work without removing the cab for nearly $1000 left than what the Ford dealer near me wanted. Roughly $1000 to lift cab/labor and $1000 in parts. I told them they were crazy. Daystar body bushing kit and 4.wheel parts saved me about $1000. I've got out of the truck since...I realized that no matter how well I took care of the truck, I wasn't going to be able to afford to fix it when it took a crap. Not to mention someone really needs to know what they're doing working on these. Back into the gas world. Perhaps I'll return to the diesel world sometime after in life. I do miss the truck. Good luck!
@@Nater389 Thanks
damn, i just have one question, where are the biscuits? he made that shit look like gravy work
I NEED THIS WHOLE MOUNTS FOR A 2000 FORD EXPEDITION!!!! HELP, ANY LINKS?? WHERE CAN I FIND THEM???
Thanks for the info.
Great video. Thanks.
excellent job!
@AutoRex how did you get the front ones? Remove bumper? Mine are spinning after breaking them loose!! Help
The front mount nuts are accessible when the hood/grill is lifted on the 08-10 trucks, 11+ will probably require the grill to be removed.
Perfect video
Minute nmark 1:20 times a thousand; THIS STEP IS CRUCIAL SO U DONT BREAK THE CAB MOUNT BOLT!!!!!!!!
Boy I wish I watched this before I screwed the damn cage but up lol
Good video. I also have a 2011 super duty. Cab n half. I got my mounts from ford (friend works there) but I didn’t get the info where the black mount goes. I have 3 positions rear mid & front. The black mount is shorter and not sure the proper position?? You mentioned in the video that the black(rubber) one goes in the center. But under my trk , the center is crumbled yellow ?
Super cab is likely different than a CREW cab truck,, check with your buddy.
Hi, I'm about to give this a go on my 08' F250. Got kevlar daystars. Could you confirm that there are only 8 on my truck total, 4 on each side please? Thank you!
I need you help further buddy. I got into it and was able to remove 7 of the 8 body mounts screws. One looks like the nut was broken by the guys who took the cab off to replace the oil cooler a couple months back when I broke down in North Carolina. They told me then I'd need to replace the mounts, but wanted an arm and a leg to do it so I thought I'd try or get my mechanic here in Arkansas to do it. Well, I'm stuck at this point and am looking for some advice on how to remove the spinning nut. It is located in the 3d from front drivers side. I can't replace the other 3 either because that mount won't let the cab lift (I think). How would I remove this nut? Thanks buddy.
Brent
+C3 Voyage Try heating the bolt then raising the cab in the area next to the mount so as to put pressure on the stripped nut and hold it in place. Thats the only non-destructive way I've found to get around the problem of stripped cage nuts. Funny, I once broke down in NC too. Damn possum took out our rental car! Let me know if you have any further questions.
Thank you for the reply! I did just that! I put jack near the bolt and lifted to a degree. I then heated the nut for a minute. I even used a flathead screwdriver with downward pressure to attempt it. Kept spinning.
+C3 Voyage I've never tried any other way, It has always worked for me. Might have to cut an access hole somewhere and drive a wedge in between the nut and the cage. Which mount is it?
Driver's side, 3d from front. I was told by the guys that did the oil cooler just now that there is a backup plug under the carpet like the pre-08's had. He said I have to remove the back seat and trim to lift the carpet, remove plug and put a socket on it. I'm going to be ticked if there's no plug! : O) Will let you know one way or another.
Brent
Sure that I have spun the cage nut on driver's side very front. How to get to it . . . unspin it. . . . : (
Have to get something up in there to wedge it. If it's the one under the radiator, there should be an access hole nearby.
Thanks good well done video
How many bushings mount the cab?
How did the mounts hold up?
Very helpful
Tanks you so much 💕
What size is the nut inside the body
Did ya have trouble with the front mounts by the radiator? I just did my 2011 with 105,000 miles and it's a REALLY REALLY clean truck that NEVER goes off road with NO MUD underneath it and I had to CUT out both front mounts out. Thank you for the video, well done.
Having the same problem with the front mount bolts. They turned a good ways out, then stopped. How did you cut these out, how did you get to the top of the mount?
@@twigmeat : What did you do to get your stuck body mount bolts out from your truck? from Replacing disintegrated bushings
williamsantiago: What did you do to get your stuck body mount bolts out from your truck? from Replacing disintegrated bushings. You said you had to CUT them out. Then do a broken bolt drill extraction procedure? Sheesh. Requesting advice on your hindsight, thanks
How do you determine they need replacing? Any sighs of wearing
clunk clunk bang clunk clunk bang clunk bang clunk
Great video this is the exact problem I am having however I am having trouble finding the front body mounts can you please show us where they are? Thanks for the video.
+Brandon Beckett Front mounts are directly behind the fog lights on both sides, above the sway bar frame mounts. See picture here: imgur.com/wgCp7mZ
Front mounts will be under the radiator support, then the rest are under the "Cab" firewall, center and rear on Crew Cab
How you like the s&b ones
I have been watching a lot of videos on how to replace cab mounts but no one has yet made a video showing how to replace the mounts in the number one position position which I would believe is to be the front mounts would someone please make a video showing how to remove on and replace these mounts and how to lift the front of the body up thank you so very much.
Next time I get one of these trucks in for mounts, I'm going to do a long-form video showing removal of each mount. However, on these trucks, removal of all the mounts are the same process (remove bolt, pry mount downward).
@@AutoRex101 Not on the front 2 on each frame rail, they sit above it, have a nut on top and a bolt thru the frame. I didn't replace mine 2005 because they were rubber and not destroyed...… Yet.
The link you put goes to the kevlar bushings on amazon. The ones you installed look different. Which ones did you use? How's the ride?
+Matthew Elsass The mounts I used in the video are Ford OEM (requested by customer). I cannot personally notice much difference between OEM and kevlar bushings, but I primarily deal with heavily modified trucks which have shit ride quality to start with.
Your Amazon link doesn't work
Mine were so goddamn hard I did use my impact wrench but they were bouncing the impacts so much it couldn’t take the bolts off lol had to use my 25” ratchet to take them off
Awesome and if you don't have access to a lift can you jack one side and do it individually or you need to raise both sides same time?
You can do one side at a time. Just keeps the bolts on the opposite side of the lift a few threads in so the cab doesn't slide.
@@wanny07 👍🏼gotcha and preciate it
I spent too much money 💰 replacing all suspension bering seller u just an after all I find that it's the problem TANKS
AutoRex I am about to complete this job on my 2011 F-250, do i need to disconnect anything such as steering column, inter cooler, etc...? Is it really as simple as the video made it look? Thanks for the video!
+Kyle Baca As long as you do not raise the cab any higher than is necessary to replace the upper mounts, you do not have to disconnect anything. The cab only has to rise about 1/2" above its normal ride height to remove them. I do about two of these per month and never have any problems or comebacks doing it that way. The process is really simple, but I can imagine saltier climates would cause problems for people separating the mounts, so stock up on PB Blaster if you live in that climate. The most important thing is to keep the cage nuts from stripping. Let me know if you have any other questions.
OK, lets say the cage nut does strip, how hard is it to install a new one? Any tips/tricks would be helpful. Or just replace it with a standard nut?
The doorman replacement part comes with a new cage and cage nut + bolt
Could someone please post part numbers for the Dorman bushings for a 2011 f250 crew cab 4x4?
924-065 x 2 ea., 924-066 x 4 ea., 924-320 x 2 ea. 8 total on a crew cab.
Great video, where did you buy your new bushings?
Thanks. These bushings came from the local Ford dealer as per the customer's request. I advise everyone against using Ford's OEM bushings because they still fail in the same short order as the originals, and they're expensive (over $500 for the set). Recommend using aftermarket bushings made from real rubber.
what about kevlar body bushings
+Margaret Brooks They hold up much better than OEM bushings. People say they make for a rougher ride though. I have never noticed a huge difference in ride quality with kevlar but I always work on suspension-modified trucks that lack ride quality to begin with.
Did you have to disconnect ANYTHING under the hood to raise cab just enough to remove top part of mount? I'm doing this job Tuesday, I bought the S&B Silicone mounts,
Russell, what was your outcome on loosening anything before lifting the cab?
What are the symptoms that point to these mounts beings bad?
+Josh Griffith You will get loud knocking sounds out of the rear of the cab when going over bumps. If you have pinstripes, the stripe on the cab will sit lower than the stripe on the bed.
I'm not getting a loud knocking sound but the back corners are squeaking and creaking as the cab shifts when I go over uneven terrain and the cab seems to be shifting more than it used to.
@@IPTMFF Crawl under truck with a creeper, you'll KNOW if they are bad, my 2011 rear look just like the ones he pulled out, you can rip them apart with your fingers. It's OBVIOUS if they're trashed,,
What is the average time frame it takes to complete?
I popped the front ones in took me less than a couple minutes on each side. The hardest part was getting my hand reached up there. Also use grease or soap lol
Awesome! Would this be the same for a 2009?
The TITLE Of video reads, 2008-2014,, so um, yea?
Doesn't get much better than that.