Nice job man. Also, just enough comedy to keep us entertained, and dope cameo by 'the lady bug'. Lol. Also, I didn't know about using the on/off switch to power up for keeping the sensor light on all night vs just keeping the sensor on as a sensor. Thanks a million!
I have the same type flood lights on my home! I just found your channel, thanks, this FINALLY took the guess work out of the equation. Flood lights were already on the home when I purchased but had no instructions.
Thank you so much I could not figure out how to get my security camera to work because my flood light would not stay on. My security camera screws into the floodlight socket, now everything works perfectly you are the man
Mine just has mins., test and range. Have set it for 1 min. and medium range. Can't figure out how to set it for motion sensor. The light turns on and stays but that's all it does.
Question: I have the ETi 240 that, in the last couple of weeks, will not shut off at all (probably a power surge). No matter what I try, I cannot get the sensor to reset. It is wired into the light in the garage, so no separate switch, but even killing it at the breaker has not helped. Suggestions?? Thank you!
How can activate my sensor lights to work only at night time..because mine all day they’ve been detecting cats dogs even branches ..I don’t have any switch inside to turn it off..
Thanks! Mine was staying on and suddenly I noticed it was going off tonight, but not staying on long enough. I don't know if a neighbor sneaked over here and fixed or the cold weather made it work again🤷. I want it to stay on twenty minutes. Thanks!!!
Wow thank you. you answered a question I've had issues with for 10 years. how to use the motion detect light switch vs regular flood light switch. ha ha that's been a nightmare for me!!
So I have a motion detector flood that came with the house. There's no manual, and I can't find the brand on the thing. Thanks to this video I was able to figure out how to make it work properly again. The trick was a feature I never knew: turning the switch off for 3-4 seconds changes the mode from motion detection to always on. I was pulling my hair out! Dude, you're a little bit dorky, but I'm grateful for this video.
@@kevinquattrocchi9550 The trick was a feature I never knew: turning the switch off for 3-4 seconds changes the mode from motion detection to always on.
I'm trying to find motion sensor lights with the on/off/on feature to keep them on. It would be nice if people who have them would give the brand and model in their reviews so others would know. Most descriptions of the lights don't mention this feature so they may or may not have it.
My light has the exact same settings. But the test/on-time little slider switch broke off... trying something to fit in there to slide it. Thank you! :)
if dualbrite is on then the light will be dim then when motion is senst then the light will go brite if dualbrite is off then the light will not dim but it will still detect motion
I have a question. Say the "on time" for the light is set at 6 hours. After 6 hours have elapsed and the light turns off, will it come back on if motion is detected?
1:12 Idk i'd say they should get a on ladder to get use to it. Me personally never am comfortable on a huge ladder but i always have to get up there anyways, of course i built houses most of my youth. But i do got height issues, But its something you gotta kind of push to overcome. & i was in the army too & stood atop the tallest Repelling structure in the u.s. & one of the tallest in the world, Eagle Tower, But nope hieghts still bother the pss out of me for some reason. Most of the people i notice like myself tend to be over cautious on ladders making sure they are aligned right & all that more than someone who isn't, at least from my experience thats the case, Its always the guy thats not afraid of heights that falls off the ladders, Mayhap because they are a little to comfortable using them that they don't make sure everything is set right?
Great video but you can just buy it a fiber glass ladder from Home Depot and return it after you finish the video, safety first ! just make a good video FYI
Nice job man. Also, just enough comedy to keep us entertained, and dope cameo by 'the lady bug'. Lol.
Also, I didn't know about using the on/off switch to power up for keeping the sensor light on all night vs just keeping the sensor on as a sensor.
Thanks a million!
I have the same type flood lights on my home! I just found your channel, thanks, this FINALLY took the guess work out of the equation. Flood lights were already on the home when I purchased but had no instructions.
Thank you so much I could not figure out how to get my security camera to work because my flood light would not stay on. My security camera screws into the floodlight socket, now everything works perfectly you are the man
Man you just help me save some money I was thinking about buying some new flood lights I didn’t know you adjust them to stay on at night........thx
great video. learned what i needed and got a few laughs. thanks!
Great video, I usually don't watch 6-minute videos but this was filled with "lots of good humor, content, and tips. Congrats
You have a short attention span. Sad
Very good video guys
That's super cool. Thanks 👍👍👍👍👍
Great info while having fun
I'll see if I can make my backyard sensor work with your tips
Thanks
Thanks man , I don’t care if you talk about the ladder or not , i came here for the info. About the lights And i got the info. thanks dude !
Mine just has mins., test and range. Have set it for 1 min. and medium range. Can't figure out how to set it for motion sensor.
The light turns on and stays but that's all it does.
Question: I have the ETi 240 that, in the last couple of weeks, will not shut off at all (probably a power surge). No matter what I try, I cannot get the sensor to reset. It is wired into the light in the garage, so no separate switch, but even killing it at the breaker has not helped. Suggestions?? Thank you!
How can activate my sensor lights to work only at night time..because mine all day they’ve been detecting cats dogs even branches ..I don’t have any switch inside to turn it off..
Thanks! Mine was staying on and suddenly I noticed it was going off tonight, but not staying on long enough. I don't know if a neighbor sneaked over here and fixed or the cold weather made it work again🤷. I want it to stay on twenty minutes. Thanks!!!
What could be the cause of flickering when on dual brite but normal when off?
Do you know how to rewire if I don't have the part that you plug the light on to. ASAP thank you
Exactly what I needed, one reccommendation: get a wireless microphone and improve sound quality. Thanks!
I just watched for the laughs this was a great video. Thank!
How much money do you charge for the job just one light?
i liked how u used the ext ladder backwards
Wow thank you. you answered a question I've had issues with for 10 years. how to use the motion detect light switch vs regular flood light switch. ha ha that's been a nightmare for me!!
Read the safety instructions on the side of your aluminum ladder.
Yes the instruction saying, don't use this ladder for electrical work.
Very helpful. Thank you.
So I have a motion detector flood that came with the house. There's no manual, and I can't find the brand on the thing. Thanks to this video I was able to figure out how to make it work properly again. The trick was a feature I never knew: turning the switch off for 3-4 seconds changes the mode from motion detection to always on. I was pulling my hair out! Dude, you're a little bit dorky, but I'm grateful for this video.
My stays on once its night how do you change it back to motion?
@@kevinquattrocchi9550 The trick was a feature I never knew: turning the switch off for 3-4 seconds changes the mode from motion detection to always on.
I'm trying to find motion sensor lights with the on/off/on feature to keep them on. It would be nice if people who have them would give the brand and model in their reviews so others would know. Most descriptions of the lights don't mention this feature so they may or may not have it.
LOL! 😂 Thanks! Exactly what I needed!
Mine has a knob that says "ACCENT", I have no idea what it does, no manual and no trace on the web. It's an old EML-100.
Great. Thank you. Helpful.
Do you have videos for other home repairs? I was able to easily follow your instructions. Thank you. Great job!
My light has the exact same settings. But the test/on-time little slider switch broke off... trying something to fit in there to slide it. Thank you! :)
if dualbrite is on then the light will be dim then when motion is senst then the light will go brite if dualbrite is off then the light will not dim but it will still detect motion
what brand of lights are these?
I have a question. Say the "on time" for the light is set at 6 hours. After 6 hours have elapsed and the light turns off, will it come back on if motion is detected?
well explanation :-)
Is that a bedbug in your video?
Good instruction video...
Works good
I just purchased a house and don’t even know where the light switch is for the floodlights
Your sensor head is upside down and in the incorrect position for mounting under soffit as per manufacturer Heath Zenith instruction manual.
The control should face the ground.
So, are the flood lights made by Skobel Homes too? or, tell us the brand, brilliant one.
The subject is about how to work the light sensor not the damn latter. Half the video is about the ladder
Ignacio Ortiz he’s talking to the ones that don’t know just to make sure everyone is safe.... that was actually nice of him
great video. also seems like a really fun group of dudes to work with. y'all hiring?
If you wasn't awake at the beginning, you will be at 0:14
My ding dong neighbors were mad I ranged IN my sensor. Was going off all the time and people laughed
1:12 Idk i'd say they should get a on ladder to get use to it. Me personally never am comfortable on a huge ladder but i always have to get up there anyways, of course i built houses most of my youth. But i do got height issues, But its something you gotta kind of push to overcome. & i was in the army too & stood atop the tallest Repelling structure in the u.s. & one of the tallest in the world, Eagle Tower, But nope hieghts still bother the pss out of me for some reason. Most of the people i notice like myself tend to be over cautious on ladders making sure they are aligned right & all that more than someone who isn't, at least from my experience thats the case, Its always the guy thats not afraid of heights that falls off the ladders, Mayhap because they are a little to comfortable using them that they don't make sure everything is set right?
Thanks now I know why my motion light only comes on for a few seconds. I bet it was left in the test mode
How to program my Honeywell security lights
You're not supposed to use a conductive ladder when work on electrical
Elaborate
lol this video is funny :P can you also do something about security camera?
2 minutes and 10 seconds of instructions on how to use a ladder while I'm trying to learn about motion sensors. ridiculous
Great video but you can just buy it a fiber glass ladder from Home Depot and return it after you finish the video, safety first ! just make a good video FYI
Can you talk about ladders some more
Youre lucky that lady bug 🐞 didn't attack.😂
2:19 No junction box is not code...
Your extension ladder is wrong. 4 foot up one foot out.
Constructive criticism: teach them how to set the light and be done with it. Not the ladder or safety, etc.
What's wrong with being responsible?
@@alyssapeters6271 I don’t even remember the video or what I was responding to. Nothing wrong with being responsible.
@@alyssapeters6271 We searched for light set ups, not ladder instructions, that's why.
HELLO!!!
Ladder ? WTF is this video about ? I thought it was about adjusting the motion sensor for the flood light
Thank you very much
First two minutes are about your ladder. Skip ahead.
I saw a bug crawling on your flood light
😂😂😂😂 the crook is in your house now
Homeboy looks like Christian Bale and Jake Shields
Skip the first 2 minutes if you want light info unless you want a 101 on ladders (waste of time!).
Dude, YOU GOT BUGS!!!
Facial fuzz! 🤣
Cut the first 2.5 min and the last 3 minutes. O/w good info here.
Wtf...how to use a damn ladder.
Lunacy .
omg the light info starts at 2 minutes in. Dude is rambling about how to use a ladder until then. smh
Skip all the unecessary crap and start at 2:14, you're welcome
I thought this was about the light no likes from me
Let my phone detect motion from my motion floodlights
Sketchy-Boyfriends
Ladder instructions? Really?
I don’t like flood lights
Ladybug
This guy talks to much just get to the point
Pair of sodomites , surely not ?