How to start my

Поделиться
HTML-код
  • Опубликовано: 3 фев 2025

Комментарии • 43

  • @Shoreditch
    @Shoreditch 10 месяцев назад +1

    Lovely Jubbly. If you modify the negative battery lead (cut off the tab nearest you) you can re-position the the battery nut, bolt and lead to the same orientation as the positive lead which makes for easier removal and fitting. Also since the battery goes flat over 5 months why not remove it before the lay up, then recharge the battery to be sure, to be sure, a couple of days before the first start up.

    • @wrenchmonkey77
      @wrenchmonkey77  10 месяцев назад

      i don't want modify the battery lead, because not need remove the battery many times. I did not remove the battery, because i do not planned not use the bike for 5 months.

  • @gerhardbeschorner2851
    @gerhardbeschorner2851 8 месяцев назад +2

    Nice work. 😊

  • @MT07SKLRIDER
    @MT07SKLRIDER 2 года назад +1

    I have Honda CBF 500. Your videos help me alot in everyday maintance. Keep up the good work! Very usefull videos

    • @wrenchmonkey77
      @wrenchmonkey77  2 года назад

      Thanks for watching and comment. Im happy if my videos helpful for you. Have a safe ride! 😉

    • @GeekOT1
      @GeekOT1 Год назад

      do you have the 2008 model? I'm tryna find out what battery it uses

  • @Bioly1990
    @Bioly1990 Год назад

    I can't believe for the life of me that after 5 months, a motorcycle with carburetors started from a battery with rusty terminals... laughter in the room
    hahaha

  • @GeekOT1
    @GeekOT1 Год назад +1

    Hi, I have the CBF500 2008 model do you know what type of Battery it comes with and what type of charger you should use? I'm considering getting this charger SMALIFE Car Battery Charger, 5 Amp 12V Automotive Smart Battery Charger/Maintainer for Car, Motorcycle, Lawn Mower, Boat, RV, SUV, ATV and Mor

    • @wrenchmonkey77
      @wrenchmonkey77  Год назад

      Hi. Sorry i dont remember what type battery was it.... the charger is looks ok for me what you want to use it ;)

  • @mohoszsolt
    @mohoszsolt Год назад

    Ne hagyd benne az akkumulátort télire.
    Ki kell venni, melegre kell tanni, havonta-kéthavonta csepptöltő neki. Havona-kéthavonta a motort is illik beindítani, mivel amikor leállítod egy szelep biztosan lesz nyitva,, amin kerezstül a blokk kapja a nyirkos levegőt. Másfél-kéthavonta töltés+indítás és fél óra járatás a titok nyitja.

    • @wrenchmonkey77
      @wrenchmonkey77  Год назад

      itt nincsenek télen olyan nagyon hidegek, mint Magyarországon.... #jolvanazugy 😆

  • @Rettungssocke
    @Rettungssocke 2 года назад +2

    Hey my choke is going a little bit back after i pull it out and the bike stalls....so i have to hold the choke for like 30 seconds. Any idea how to fix it?

    • @wrenchmonkey77
      @wrenchmonkey77  2 года назад

      You can adjust the choke cable at the carbs. Make sure the choke going back full when you push back!

    • @Rettungssocke
      @Rettungssocke 2 года назад +1

      @@wrenchmonkey77 Okay, i will try that... its just so hard to press the start button, hold the clutch and this choke. Cheers my friend and happy new year!

    • @zozek77
      @zozek77 2 года назад

      @@Rettungssocke Thanks! Happy new year you too! 😉

    • @robinmcphail34
      @robinmcphail34 Год назад +1

      Put a clothes peg behind it, works for me!

    • @wrenchmonkey77
      @wrenchmonkey77  Год назад

      Good idea 😉

  • @nandobj79
    @nandobj79 2 года назад

    thks for the video¡¡

  • @tonywhite1952
    @tonywhite1952 Год назад +1

    I have one of these bikes and mine is 05 reg I am having difficulty in trying to start it it keeps flooding as I can smell petrol it fires and tries to start but cuts straight out it was nothing wrong with it when I put it away in the garage seems to develop this problem in flooding any ideas

    • @wrenchmonkey77
      @wrenchmonkey77  Год назад +1

      You need take off the carburettor, strip apart and do a good clean.

    • @tonywhite1952
      @tonywhite1952 Год назад

      @@wrenchmonkey77 I'm not a mechanic and it seems too complicated to me I want somebody to fix mine for me

    • @tonywhite1952
      @tonywhite1952 Год назад +1

      Hello again it's obviously I've got to have my bike taken to a workshop and I was wondering how long does it take to take the carburettor off on my Honda CBF 600 and to give it a good clean and put it all back together as I'm trying to find out how much of price a dealership on a charge me bearing in mind I've got to have it picked up as well enjoyed your video very well thank you

    • @zozek77
      @zozek77 Год назад +1

      @@tonywhite1952 I dont know how many hours charge by dealership, but the job around 3 hours i think.

    • @tonywhite1952
      @tonywhite1952 Год назад +1

      @@zozek77 that is very helpful thank you for your reply 3 hours I will think should cover it

  • @thomasalba4939
    @thomasalba4939 2 года назад +2

    Az a nyamvadt batterri 😂😂😂

  • @merztorsten5351
    @merztorsten5351 Год назад +2

    klar Läuft die, Öl rein Sprit rein und ne gute Batterie... its a HONDA

  • @petersmith6974
    @petersmith6974 Год назад

    Pretty much neglect is what you did.
    Not having much experience with vehicles and how they should be stored if not used.
    Battery tender and fuel stabiliser if not running it often.

    • @wrenchmonkey77
      @wrenchmonkey77  Год назад

      You are not right.... im experienced mechanic so i know what i did.
      You are right... i have no experience how NOT use my vehicles 🤷‍♂️ Ive stored as my best and can fix if its wont start as the video shows 😉