Tusca Hitchhiker Camper! This may replace my fiberglass topper
HTML-код
- Опубликовано: 2 окт 2024
- In depth tour and info on Tusca Outdoors brand new Hitchhiker camper. Lightweight, Insulated, and cheaper than a new fiberglass camper shell. This really could be the best camping hack. Check them out at www.Tuscaoutdoors.com
With the bed rails easily available you could buy a rack that attaches to them like a exoskeleton that way you don't have to attach it to the camper shell at all. That way you add zero weight to the Tusca and it's still ligthweight and still easy to remove it. To bad they don't make them for mid-size truck beds as i love the idea of a dust free encloser.
Definitely a good idea about the bed rails. There’s also a possibility they may expand to the mid sized trucks as well. If you build a platform to raise over the wheel wells and out onto the tailgate it could work with this model.
@@TruckBedliving If they do them for midsize trucks i would be all over this as i love the price and there perfect to keep dust out when hitting those dry backwoods trails.
An idea for you. Design a fold down roof basket for a low profile when not in use and have higher sides when in use.
Padlock for the tailgate… genious! ✌️😬
thank you! either on the tailgate striker bolt if you can get a lock that fits or right on the mechanical latches of the tailgate itself.
product gives me tons of ideas but most would need to be custom fit per truck model.
As far as the rubbing on the front can you loosing the front hold downs and tighten the rear ones basically slid it bake like an inch and will it stay put
@@larry04456 will definitely keep that as an option, thank you for the suggestion!
These need tip out windows instead of sliders. Otherwise it is a neat concept.
yes I can definitely see the advantages of that but would likely increase the cost significantly
pool noodle at the front against the box...12 volt computer fans on the vents run off a jackery type setup...looks like its good quality at a reasonable price.
great ideas, specifically the pool noodle. cheap and easy solution. thank you
The Eco Flow AC/Heater would be perfect for this unit.
I had the same thought at first but everyone I know personally who has used them has been left underwhelmed with their performance. The cost is too much to try on a whim. maybe down the road.
Looks like it’ll be tight in there
yes but its overall advantages make it worth it so far. I really like how this model can slide right in between the wheel wells.
@@TruckBedliving. Looks great! Does it Fit a Honda Ridgeline ??
😊
@@mfcarneybest way to know for sure is if a sheet of plywood would fit
I just replaced the exhaust fan in the wet bath of my class B van. It is 6-1/4" dia and is DC powered. You can mount it through the sidewall. Maxxfan Dome by MaxxAir an Airxcel brand. You can even purchase one with a built in LED light. Mine came with the shield for mounting it on the side.
solid idea, will add this to my list of things to checkout. thank you!
@@TruckBedliving you are welcome. I looked for 9 months for a vent with fan that would fit in the existing hole in the fiberglass top on my class b. Measure multiple times, check the measurements on line andin the catalogue... it was a pain, but it came and it fit.I am so happy with it.