Thanks very much, Sir. I have a question about the unit in this simulation. If SI (mm) is used in Abaqus, the units for conductivity and specific heat should be (mW/mm/C) and (mJ/Ton/C). So I am wondering why are you using (W/mm/C) and (J/Ton/C) in your video? Would there be any difference if using different units?
Hello sir, this is very useful video. But sir when I am scaling down (i.e. in L-B-H in micrometer) the geometry then it will not show any output so can you pls suggest me what should I do for that.
Hello I needed to calculate the temperature rise due to friction for aluminium plate and nylon blocks, can you provide with theoretical methods to calculate that.
Thermal conductivity of aluminium is 210 W/m-K or 1460 BTU-in/hr-ft²-°F so i am not able to understand how to convert it in.... W/mm-c so that it will come 0.15 W/mm-c????? I need the thermal conductivity of H13 tool steel, literature says its 24.3 W/m-K What should i use for the model
Dear sir, how to add translation and rotation velocities in a single step for fsw, also please make a video regarding eulerian properties for metals. Thanks in Advance
Hello brother can you do a video on Thermal stress analysis of a riveted lap joint by using coupled temperature displacement module. I am currently having contact problems when I try to find the thermal stress due to cooling of rivet by using coupled temperature displacement. In my message file I get these problems 1)THE ESTIMATED CONTACT FORCE ERROR IS OUTSIDE OF CONVERGENCE TOLERANCES. 2) DISP. CORRECTION TOO LARGE COMPARED TO DISP. INCREMENT 3) MAX. PENETRATION ERROR 75.1979E-12 AT NODE LEFT STRIP-1.838 OF CONTACT PAIR (ASSEMBLY_LEFT STRIP-1_LEFT STRIP HOLE SURFACE,ASSEMBLY_RIVET-1_RIVET MIDDLE SURFACE) MAX. CONTACT FORCE ERROR 1.44901E-03 AT NODE LEFT STRIP-1.21281 OF CONTACT PAIR (ASSEMBLY_LEFT STRIP-1_LEFT STRIP HOLE SURFACE,ASSEMBLY_RIVET-1_RIVET MIDDLE SURFACE) Please make a tutorial on this brother, I will be grateful to you.
Hi Sir, First of all i would like to thank you for this video. i have a question that to move the friction pad along the full length what changes should i make ?
sir i am working on piezo sensor on a aluminium plate where exicitation is given by varying thermal load but i am not getting the correct procedure to do can you hep me in that please give you email id or any contact details where i can connect with you
Great tutorial again. Every step was clearly explained. Kudos
Thank you, Sir, for this great work. Very helpful indeed!
Thanks sir, you helped me in my final year project and provided me with a bit of information regarding abaqus.
great work sir, keep doing sir. thank you very much for your clear explanation
thank you sir great work, lot of learning from your tutorial.
Very nice tutorial video, thanks a lot Sir! Regards
So nice of you
I liked the video. Neat and clear
thank you , a very nice video can you please include the abaqus deck also in description
Thank you so much
it's usefully thanks alot for your work
Thank you, so creative
thank you for quick tutorial
very good, thank you very much.
One shot solution portal for every problem related to Abaqus 👍
Sir, which college do you belong to???
Thank you so much for this tutorial, do you have a tutorial on removing friction due to contact between surfaces ?
your videos are very helpful for me learning abaqus -can you put the video of friction stir welding with real FSW tool .
I'm also doing some work in abaqus fsw , can you help ?
Thanks very much, Sir. I have a question about the unit in this simulation. If SI (mm) is used in Abaqus, the units for conductivity and specific heat should be (mW/mm/C) and (mJ/Ton/C). So I am wondering why are you using (W/mm/C) and (J/Ton/C) in your video? Would there be any difference if using different units?
He wrote units wrongly but value is correct for conductivity. Though specific heat value is wrong that needs to be 1000 times the present value.
can we see heat generation due to hysteresis in viscoelastic material ( lets say a rubber block subjected to cyclic compression load )
Hello sir, this is very useful video. But sir when I am scaling down (i.e. in L-B-H in micrometer) the geometry then it will not show any output so can you pls suggest me what should I do for that.
Hello I needed to calculate the temperature rise due to friction for aluminium plate and nylon blocks, can you provide with theoretical methods to calculate that.
Hello sir, do you have any tutorial on simulating wear mechanism between 2 bodies using archard model in abaqus?
Thermal conductivity of aluminium is 210 W/m-K or 1460 BTU-in/hr-ft²-°F so i am not able to understand how to convert it in.... W/mm-c so that it will come 0.15 W/mm-c?????
I need the thermal conductivity of H13 tool steel, literature says its 24.3 W/m-K
What should i use for the model
Sir please upload tutorial video on friction stir welding...Thanks
dear sir what would my units be for
specific heat and
density
if i were to do a 2-D Analysis
sir, we are doing frictional analysis project on abaqus..can you share any links or videos for learning the basics
Hello Sir,
May I ask you if you can share how to do simulation on friction between fibers on Meso scale level.
Hello. Did you tell her everything you've done? I can't get results.
hello may you explain how can calculate wear in forming process . thank you in advance
Dear sir, how to add translation and rotation velocities in a single step for fsw, also please make a video regarding eulerian properties for metals.
Thanks in Advance
Did you got it? Please share if yes.
Sir please help me .I want to know that how can I do frictional heat generation analysis in case of crap process
Sir,
Iam getting this error
This keyword is not available in abaqus/explicit
How to resolve this
Sir how can v add a lubricant film in between them
Hi friend, I really need your help, I need to do a friction welding simulation, but I do not know how. Please help me, it's for the master's degree.
Hello brother can you do a video on Thermal stress analysis of a riveted lap joint by using coupled temperature displacement module. I am currently having contact problems when I try to find the thermal stress due to cooling of rivet by using coupled temperature displacement.
In my message file I get these problems
1)THE ESTIMATED CONTACT FORCE ERROR IS OUTSIDE OF CONVERGENCE TOLERANCES.
2) DISP. CORRECTION TOO LARGE COMPARED TO DISP. INCREMENT
3) MAX. PENETRATION ERROR 75.1979E-12 AT NODE LEFT STRIP-1.838 OF CONTACT PAIR
(ASSEMBLY_LEFT STRIP-1_LEFT STRIP HOLE SURFACE,ASSEMBLY_RIVET-1_RIVET MIDDLE
SURFACE)
MAX. CONTACT FORCE ERROR 1.44901E-03 AT NODE LEFT STRIP-1.21281 OF CONTACT
PAIR (ASSEMBLY_LEFT STRIP-1_LEFT STRIP HOLE SURFACE,ASSEMBLY_RIVET-1_RIVET
MIDDLE SURFACE)
Please make a tutorial on this brother, I will be grateful to you.
Hi Sir, First of all i would like to thank you for this video. i have a question that to move the friction pad along the full length what changes should i make ?
Friction pad is a fixed attachment moving in vertical direction only, it doesn't move other ways👍
Only the object/wheel moves 👍
I got only one way, that is by reducing the pressure applied on the pad. But it is not fair. Do you have any other way out. Please tell if you know.
Sir i need your help
I'm mtech final year mechanical student. I'm working on frisction stir welding
Can i get assistance Or guidence of u sir
Very helpful tutorial sir. But were you just eating an apple 8:33 ?
Sir i need your assistance
Dear sir can you help me on wear simulation
if you got or complete to find wear simulation. please let me know on rizwan_uol@hotmail.com
sir i am working on piezo sensor on a aluminium plate where exicitation is given by varying thermal load
but i am not getting the correct procedure to do
can you hep me in that
please give you email id or any contact details where i can connect with you