1994-2001 Acura Integra Speedometer Speedo Cluster Removal DC2 DC4 DC
HTML-код
- Опубликовано: 2 окт 2024
- In this video I show you how to remove a speedometer from a 1994 to 2001 Acura Integra. I am in no way shape or form responsible if you damage, injure, break anything when you are removing your cluster. This is simply a video showing how I removed mine. I know there are some other videos out there showing how to remove it however they are older and the visuals are kind of grainy so I figured I would make a new video.
Tools needed:
Stubby Phillips Screwdriver
Long Phillips Screwdriver
Hey 👋 so i swapped my cluster from my 1999 gsr to my 1995 gsr everything works except for the gas gauge any idea what might cause that
There are differences in the 94-97 integra clusters to the 98-01 clusters. This forum post should help you.
honda-tech.com/forums/tech-misc-15/integra-gauge-cluster-swap-obdi-incompatability-813593/
Any advice? My cluster rpms and spedometer, gas and temp wont work but still lights up... only other lights that show up is hazards and high beams and my blinkers dont work either just the hazards high beam symbol and still lights up that's it nothing works and I cant find a video or anything on my issue specifically
That is a unique issue I can't say I've seen before. The easiest thing to try would be to swap the cluster out with another one and see if you have the same issues. If that doesn't fix it you might have a wiring issue somewhere.
My 2001 Acura Integra's speedometer stopped working, is stuck at 0. It works and does's work, keeps sticking. The odometer/milage is still working. I need to know how to fix the speedometer once this is off. Thanks!
Chances are you need a new speedometer or a new speed sensor it's hard to say without looking at it.
@@TheInteriorAutoMechanic Thank you. I am thinking, replace the sensor and go from there?
@@pennpointdesign Happy to help! Please consider liking the video and subscribing to the channel!
So I can take off the gauge lens and put a bezel behind it without to much trouble ? Lol
You can but I wouldn't advise it
@@TheInteriorAutoMechanic got it done and was pretty simple, wish I could up load a pic
How do you remove and replace the fuel gauge
To access the fuel gauge you will need to remove the Phillips screws on the backside of the speedometer and also remove the plastic covers on the front side. The clear cover is just held on by push tabs all the way around. The black bezel is held on by 2 or 3 screws on the back side once you remove those screws the bezel is held on by clips around the edge of the speedometer. After you remove both of those items flip the speedo of and you should see 3 of 4 screws that is holding the gas gauge in, remove those and it will be be able to come out.
@@TheInteriorAutoMechanic thanks can you also post a video on that to
I been looking for some integra parts How do I get ahold of you and Do you still have the parts
Hi what parts are you looking for?
What brand screw driver is that btw looks nice
Only the finest Snap-on
my gauge cluster isnt coming out, did you forget a step? I just snapped my plastics in half from pulling to hard and its still in there. I already removed the two screws!!??
The video says there are 3 screws that hold the cluster in and 2 that hold the cluster bezel in.
@@TheInteriorAutoMechanic i ment the cluster besal
@@TheInteriorAutoMechanic im trying to get the cluster beszel off and it snapped in half from me pulling to hard, its still not off and im insanely confused
@@zander2246 two screws at the top of the bezel, lower the steering wheel and pull. It's held in by 2 metal clips on both sides at the bottom.
@@TheInteriorAutoMechanic i think its because my car is so old then maybe the clips broke or something