Healtech Quick Shifter | Indian Scout Bobber

Healtech Quick Shifter
• installation • parameters settings • road test.
Upgrading the shifter of the Indian Scout Bobber with the electronic HealTech QuickShifter, very easy installation, how to configure the parameters settings with the Bluetooth app and finally take a ride testing on the road the increased performances.
The Healtech QuickShifter is a electronic shifter system that works for UPSHIFTING, it is built to minimize the transition time shifting from a gear to the up gear, it is cheaper than the other electronic systems and is recommended for drag race PERFORMANCE.
If you are looking for a shifter that also works in downshifting look for other products with the "blipper" system.
00:24 HealTech QuickShifter installation on a Indian Scout Bobber.
04:11 Parameters settings with the Bluetooth app (available for Apple and Android).
04:56 Road test.
RPM reading issues solution: follow the instructions of the additional guide issued by HEALTECH, check this Supplementary Manual:
www.healtech-e...
These instructions are the same both on Scout and FTR Indian models. You need to route the QSH White wire to the fuel injector signal wire, otherwise the RPM indication in the app will not work correctly. If you follow these steps precisely the unit will work without any issues.
Where to buy the "Healtech QuickShifter Easy":
USA
www.custom-chr...
EUROPE
www.custom-chr...
ITALY
www.genialmoto...
Is a 2021 Scout Bobber with: Trask Intake air filter; Vance and Hines Twin Slash 3'' slip ons; Healtech QuickShifter.
Tuned with Dynojet PV3.
Power: 101 hp.
Torque: 73.5 ft-lb (101 NM)
#quickshifter #indianscoutbobber #healtech #indianscout #indianmotorcycles #imrg #moto
#piersalfi #scoutbobber
DISCLAIMER
This is a demo video not an official manual. if you decide to install the quick shifter on your motorcycle you do it at your own risk, only you will be liable for damages or warranty loss caused by improper installation. Before proceeding with the installation, we recommend that you study the installation guide well and make sure you have all the necessary tools to complete the process. If you are unable to proceed with the installation, contact a competent mechanical workshop.
THANKS FOR WATCHING 🙏