At this point you might as well repaint the truck, fill in the mirror holes, get some billet door handles, tint it and make the interior look nice and clean and you’ll have a super sick obs.
Why fill in the mirror holes when he can just go buy the right doors w those mirrors. It would probably cost the same since there’s 0 body work outside of prep and paint. But that’s just me.
it's nice seeing you do installs. it shows how much time it truly takes. late hours, missing parts, incorrect pieces....not everything is peaches and cream
This look is one of the nicest to keep. Still knocking down clean content clean looks.. Nice to see frame trim option's on how a comp plays fitment issues. Not only diy guys.. Thank you.
I am Building the same truck 2wd 1995 f250 7.3l Powerstroke! I purchased everything you did except I also bought a 2" front leveling kit so that way I can easily fit 35's! You should have tried that out instead of cutting/trimming parts.
Bumper looks great! Does CP Addict make the mount to add fog lights? Might be good look. Just my opinion. Enjoy the how to videos. Always good have great group of friends to help out also.
I installed a 2017 super duty on my obs and to clean up the frame rails I installed trailer hitch pieces in side the frame rail it is a perfect fit got them a Napa for 20 bucks apiece just make sure they do not hit the shackle then just weld in the front side and drill the whole good luck
the bumper looks so clean on the obs withit installed on her and i love my thin red line work for it keytag i ordered you its badass and im glad i bought it
Can't say I understand the popularity of putting these bumpers on OBS trucks, but they definitely look better on OBS trucks than they do on the 08-10 Super Duty trucks.
Love your videos man your truck is 💯🔥 you always have different content and don’t talk or do the same shit over and over like other youtube people do 🇲🇽 🇺🇸 🍻
Sence your putting money in that truck you should throw a tcase an axel and make that a 4x4. You can do all that cheaper then buying anther truck that's four wheel drive. Killer vids bro keep killin it.
The last good looking truck ford built. The bumper is a huge improvement. You may as well drop the 5k for a paint job at this point, which is chicken shit money when you consider what you spent on the GMC.
You should’ve gone with a 2017 and up superduty bumper even though it would require lots of trimming(to see what it looks like look at the Custom offsets bronco) but this still looks good
Here in Billions Montana Diesel at Costco is $2.55 I believe and Gas is $2.49. But if you go to any other gas station it's $2.90-ish for diesel and $2.69 exactly for gas. No joke, every gas station in the entire city / town / surrounding area for gas is $2.69 give or take 1 or 2 cents, but 90% of them are 2.69 except for Costco and Samsclub. I'm not not sure why anyone goes to the other gas stations to pay 20 cents more but hey not my problem.
At this point you might as well repaint the truck, fill in the mirror holes, get some billet door handles, tint it and make the interior look nice and clean and you’ll have a super sick obs.
Patrick Quinn he wants a 4wd though, that’s why he’s not doing much to it
Why fill in the mirror holes when he can just go buy the right doors w those mirrors. It would probably cost the same since there’s 0 body work outside of prep and paint. But that’s just me.
it's nice seeing you do installs. it shows how much time it truly takes. late hours, missing parts, incorrect pieces....not everything is peaches and cream
This look is one of the nicest to keep. Still knocking down clean content clean looks.. Nice to see frame trim option's on how a comp plays fitment issues. Not only diy guys.. Thank you.
I love that you're showing the ol 7.3 some love!
Honestly would like to see some more OBS upgrades. They're a great part of the channel.
horn blaster sent me the completely wrong kit for my truck. i sent it back and got a klienn kit. it works great
6.4 bumper looks good. Had mine on for a few years now and I still love it👍
You should consider mounting some cube lights on the frame horns if you can find some that will fit.
That Super Duty Bummer looks sick on the OBS
Wow that made a huge difference.
I am Building the same truck 2wd 1995 f250 7.3l Powerstroke! I purchased everything you did except I also bought a 2" front leveling kit so that way I can easily fit 35's! You should have tried that out instead of cutting/trimming parts.
Loving the way that truck looks. Can’t wait for the rest of the upgrades
That rv makes the neighborhood look real nice
Horn blaster customer service is awesome
Bumper looks great! Does CP Addict make the mount to add fog lights? Might be good look. Just my opinion. Enjoy the how to videos. Always good have great group of friends to help out also.
That bumper looks sweet on that truck
I installed a 2017 super duty on my obs and to clean up the frame rails I installed trailer hitch pieces in side the frame rail it is a perfect fit got them a Napa for 20 bucks apiece just make sure they do not hit the shackle then just weld in the front side and drill the whole good luck
And I trimmed down the rails little bit to square off the rail
Damn that looks so damn good man makes the truck look way better it's perfect
Workforit apparel are the softest shirts ever!!! Love Dmaxryno videos!
Brady Vngle soft shirts are for women.
Man the Trucks bumper came out nice 👍
Yes finally you do a 6.4 bumper on the Obs
Bumper looks good. Trimming looks good
Nice video. Why don’t you just lift it another half inch so you don’t have rubbing. The obs is really coming together.
That bumper looks bad ass!
What’re you going to be doing with the original bumper? I’ll take it off your hands... been a subscriber and supporter for a long time!!
Bro be glad gas is 3.99 per gal. In Vancouver it's 1.60 for 1 litre so 6.50 per gallon
Lol I'm looking at about 2.70/gal here in alabama
Steven Johnson I went to Austin Texas a few weeks ago and gas was 2$ per gallon, I was honestly jealous. Gas is so expensive in Canada
@@gijokers6014 here in Austin as of yesterday, $2.59 a gallon.
Lol 7:37 Chris throwing that weak at him and he was looking down and didn’t see it😂😂
Add the plastic trim and some 64 superduty fog lights u can get after market ford ones for cheap on ebay
Chris with the headlamp looking like Mole from Atlantis
Lmao damn
the bumper looks so clean on the obs withit installed on her and i love my thin red line work for it keytag i ordered you its badass and im glad i bought it
Are you going to throw in the plastic inserts for the bumper to hide the frame?
I just filled up my ram 5500 box truck about 50 gallons yesterday at $3.89 that is a $1.10 less then cali that's nuts !
chris has a lots of love for you to let you drive his truck all the time. just hope he has you under his insurance because you never know.
Love the vids my man! And the 7.3 .... doing stuff on my 7.3 as well. Keep it up 👍
would it be possible to put some white panels inside that bumper to match the truck? or put in mesh just like the BBB and paint it white
Get the top plastic piece at the ford dealer it was about the same price as an aftermarket one last time I bought one.
Obs truck looking GOOD
Can't say I understand the popularity of putting these bumpers on OBS trucks, but they definitely look better on OBS trucks than they do on the 08-10 Super Duty trucks.
6.4 bumper looks perfect! Now some custom fog light install🤔🤔
A new fresh paint and a new interior would make the 7.3L a whole a lot better bro.
This vid reminded me of why I NEVER DO PLUMBING. Never have the correct parts so go back to store half dozen to dozen times.
alford35 Amen on that one! I hate plumbing. I buy 10 times the shit I think I need just in case!
I installed a 2010 e350 bumper on mine. Still needs finishing but I like. It’s different.
Need to get a 08 to 10 2wd lower valance for that bumper to. Then start prepping the obs for Sema
That new bumper looks great but is it thinner than the old one?
You should have Dave in these videos helping you do work on trucks. It’ll be really funny with Dave
Looking super clean bro, I wouldn't have thought about a newer stock bumper, looks sick. Now what about flood lights in the holes ?
I don’t really like chrome but dam does it look good on the obs
Truck is lookin really good .... lol now just gotta do something about those mirrors 👍🏽👍🏽
For a Ford .. the bumper actually looks nice 👌
So many trips to Auto zone but it was worth it!
Hey man saw a work for it sticker on a truck in a custom offsets video. Thought you'd like to know. Keep up the great work!
Francisco Lozano he just did this one tho lol
Francisco Lozano I think you mean a 17 superduty bumper and the 6.4 looks way better
Make the I support singles moms decal you have on your door! Also I’d put the money in for a red white and blue giant workforit decal.
And I actually bought two of those dag gum sawhorses just today....LOLOL Bumper looks great!
Diesel 3.57 on ARCO at Broadway and main in chula vista right off the freeway
Ya I have that crank up bracket it sucks I had to wire tire to the round tube and looses up all the time
Are you ever going to take the molding off the passenger side?
Any chance the Work For It key tags are getting restocked? Love your content man, been a long time viewer!!
I have found the plastic piece for the bumper on rockauto. That was a couple of months ago tho, dont know if they still have it
Love your videos man your truck is 💯🔥 you always have different content and don’t talk or do the same shit over and over like other youtube people do 🇲🇽 🇺🇸 🍻
Thing looks tough bro. Tough!
And I just rolled out of lax Cali can keep there desiel the prices are out of control thank God I ordered my new rig with 300 gal capacity
Did your lift on the Obs make it a lot taller because on video it don’t look that tall ?
Would you rather have a 2019 super duty or a 2019 Cummins
Thomas Heider tough one! I like the steel body and interior of the ram and obviously the Cummins. But give me a dually f450 🤤
Dually f450 for sure. Tittie that thing out and it would be sexy
@@DMAXRYNO ok I was wondering cuz my dad has a 06 super duty and 2012 Cummins as work trucks
A shortbed swap on the 7.3 would be killer.
Sence your putting money in that truck you should throw a tcase an axel and make that a 4x4. You can do all that cheaper then buying anther truck that's four wheel drive. Killer vids bro keep killin it.
The 7🌲 looks 🔥🔥🔥🔥 now!!!
Now I wanna know what size those spacers are... inch?? inch half??
wow that bumper looks great
Are you gonna do the fog lights in the new bumper ?
Diesel in Ontario Canada is 1.69 a litre. 4 litres per gallon. You do the math :) So ain't so bad there in Cali.
The last good looking truck ford built. The bumper is a huge improvement. You may as well drop the 5k for a paint job at this point, which is chicken shit money when you consider what you spent on the GMC.
Congrats on 200k!
Where did you get your mirrors from? I'm tired of these little ass mirrors on my 97 f350
In Texas we are at 3.74 a gal not to far off awesome 7.3 wish they were a lot cheaper to buy one now a days
Look great love it
Without the plastic
Looks so much better but polish the mirrors to Mack the rest of the chrome
Looks good.. need some Silverado tows
can’t wait to see you at sema. love your vid. favorite youtuber
Looking good brother
You should do a mesh grill and mesh in the bumper 🤔
7:33 he turned away at the perfect time
Do they make some kinda mesh/billet inserts for that bumper? If so that’d be sweet!
Over kill fab makes some sweet one
are you running a lift? I'm looking at putting 35's on my 97
2.54 here in Houston
would be cool if you put a small light bar in the middle of the bumper
Absolutely Feckin Awesome
Paid 2.40 for diesel the other day in ozark Missouri
What about adding some fog lights with that bumper
I miss these gas and diesel prices tbh
First trip to AutoZone. I was thinking. "I'm sure they got the threads right" and then 1 minute later.." nope" ... Great video though
Always Awesome content
Appreciate it!
Go off roading more please so you can test Chris off road truck
I no joke did the same thing with my brackets, putting them on the wrong side that is😂
You should’ve gone with a 2017 and up superduty bumper even though it would require lots of trimming(to see what it looks like look at the Custom offsets bronco) but this still looks good
RC Bashing Studios these fit the classic look in my opinion
DMAXRYNO yeah you got a good point too because if you don’t update the front end(headlights and grille) the new bumpers don’t look right
I like the bumper it’s nice 👍
Could you tell me where you ordered this bumper from? I ordered mine from eBay and the chrome on it was really hazy and not shiny like yours
D73196 got it from carID
Where did you get the bumper spacers from?
Where did you get the grill for your truck?
Here in Billions Montana Diesel at Costco is $2.55 I believe and Gas is $2.49. But if you go to any other gas station it's $2.90-ish for diesel and $2.69 exactly for gas. No joke, every gas station in the entire city / town / surrounding area for gas is $2.69 give or take 1 or 2 cents, but 90% of them are 2.69 except for Costco and Samsclub. I'm not not sure why anyone goes to the other gas stations to pay 20 cents more but hey not my problem.
Diesel here in NW Indiana is 2.62!!