For a rear bumper, you gotta get a ranch hand. Strong, durable, well built, not too expensive, not much modification or brackets needed. It also looks good as hell.
Absolutely love this truck, especially after the respray! Sadly for us we can’t get any full size trucks here in the U.K. Can’t wait to see the next mods for her 👍🏻👏
If you get the premier membership with AAA it's 119 for 1 year and that gets you 4 tows, 2 lockout calls and 2 tire changes. You can use it for anyone but you have to be at the vehicle when the tow truck arrives at the vehicle. I have had a membership for 16 years and it has easily saved me $10,000 in tows if not more
Ryno tell Chris to put some in weld on that whole! When there small ass wholes like that works every time. Sounds jank but I swear it works and it only cost 12$ to fix and no one will ever see it and you won’t leak 1 drop of water! Just have to get it in there good it’s just a small whole in the copper behind the fins on the radiator! It’s worth a shot! Same thing happened to my street bike and rocked jb weld on the radiator for over 2 years before I sold it never had an issue!
I broke down twice with holes in my radiator and this worked. first time was late at night, limped it to super walmart and bought some water eggs pepper and a potato. took my grill off and grated the potato into the radiator, it plugged the water and cooked on then, I cracked a few eggs and a handfull of pepper in and drove it an hour home. it was still holding water the next day. the second time the plastic on the tank cracked. I got a hashbrown from mcdonalds and held it on the leak which was spraying out. sealed it up enough ito make it home. I did stop at autozone to get some bars stopleak but did not need it. my dads super old school and taught me these tricks. you guys should try doing just the potato before you swap it out, would be a cool video
I have an all stock, 96 f250 obs, with 96,000 miles and original engine in the truck, unfortunately its a gas, but its clean on the inside, no cracks or anything, all stock truck
Always wanted a crew cab obs. But for the big spots in the front bumper, would be perfect for fog lights and the trim that comes with them. Idk what brand or style you would prefer
Should just put a heavy duty aftermarket bumper in the back like ranch hand(commonly used) they just bolt right up and they look sick and more sturdier my opinion
Love the look of your obs Ford there. I miss the 79' F-150 we had in the family. What a great, fun old truck. Scary with brakes and steering, but still fun! Surely somehow you could find a stock bumper for that obs somewhere.
What about a roll pan? And custom fit some folding side steps like the newer fords that way u can still get into the bed with out scratching the good ol OBS
My back bumper on my 05 f150 has the same tear out on the bottom and it happened when we were pushing it with a tractor and a chain hook caught the lip and pulled it out.
Hey my name is jorge I see you bideos that pretty cool i got a question for u where you get that piece for you obs for the windows switchs got a 97 also and I'm missing that tream piece for the windows switches will you shoot me a link for it I'll Preciate that
I saw one of these 4wd crew cabs on iaai.com (auction site). There was 2 I think but the one was very squished and the other was gas not diesel. Not sure if that matters?
Dude I’ve got a huge office I need to furnish. What’s up with them neighbors? I should bring down the ol’ gasser OBS and pick up some desks lol. Keep killing it. Oh BTW I’ve been seeing a TON of “Work For It” stickers up here in the Victorville area.
My neighbor has two of those trucks blacked out. Both with a crazy lift height ima see if he’s still selling one. I’m in canyon lake ca I’ll try to find an ad for ya
Those pieces are for sale on shapeways as well. They were made by a member of the Powerstroke forum. They are 3D printed. Do you have the link from eBay? I would greatly appreciate it
Hey bud, I emailed you over a link to a site here in the Houston area that specializes in the OBS Ford trucks as well as other 'OBS' trucks, hopefully, it doesn't get lost in the spamz :P
Im still looking for the plastic window part for my 96 f150 lol cant find it without the all the wires also and when you do its like $65 haha. Good luck with that
Yo what are those black spikes in Chris's bed towards the back? I've noticed those on several of y'alls trucks. I've always wondered what the story is with those. Also a deburr tool (usually used for copper pipe) works good for cleaning plastic edges after cutting. I used to cut out snowmobile and jeep hoods made of lexan and we used those deburr tools to clean our edges.
The spikes in chris's bed are flagpoles made by speed pole when not running the flags they give you the spikes to have a a cleaner shorter look without removing the whole thing
i’m not a ford guy but i am beyond in love with the obs. it’s absolutely beautiful
6.7 rear bumper looks killer on those trucks
The only ford with real taste. Not your generic wheels/lift exhaust etc. Ryan has a unique taste in his vehicles, 10/10 my dude
I will always respect anyone who takes care of their vehicles, no matter the vehicle! I am a GM guy, but that is a nice ford.
Well, since you did a 6.4 front bumper swap, why not try doing the same for the rear? I think it could look pretty slick.
Mount some LED cube spots in the exposed frame horns. It looks like a perfect pocket to do so...
This is such a RUclips truck rice comment.
See if flog could could hook you up with a one off rear bumper?!?
HD42 Gaming I hope he sees this because that would be awesome
A set of trail ready offroad bumpers would set that truck off perfect. With the old school wheels and mud tires.
A torched razor blade cuts through plastic like butter 👍🏼 give that a try next time and you won’t regret it. Super smooth finish obviously too
Support the love and motivation of every video man. Life changing motivation thanks. Love watching every video man.
When santa brings your dream Milwaukee vacuum
What an aggressive looking ford, everything ties together👍 can't beat the simplicity of an old truck. Good job
For a rear bumper, you gotta get a ranch hand. Strong, durable, well built, not too expensive, not much modification or brackets needed. It also looks good as hell.
There is probably so many people triggerd that you put chevy tow mirrors on a OBS ford but in reality it looks amazing.
I love the OBS, im a Ram guy. Also remember measure twice cut once lol Thats what they always taught me.
08 superduty rear bumper with original brackets, all you have to do is drill a new frame hole for em minor trimming for the inside corners to fit
I wired up a set of those mirrors on my truck....it was a lot of wiring, glad it's done. I left out the heat.
Absolutely love this truck, especially after the respray! Sadly for us we can’t get any full size trucks here in the U.K. Can’t wait to see the next mods for her 👍🏻👏
That bumper cap is small but the difference it makes is huge. The truck is looking great. Bed line that thing
2014-2018 gm bumper! That would look nice and functional
Man you've got a nice ass truck. I've got a 97 F350 as well that I'm slowly bringing back to life.
Put some nice led Cubes in the 2 holes in the sides of the front bumper
That backpack vacuum is awesome.. My wife would say "great now you can vacuum"
You forgot to mention your harbor freight clamp you used to hold the plastic trim, I have a few of those myself! They’re great.
If you get the premier membership with AAA it's 119 for 1 year and that gets you 4 tows, 2 lockout calls and 2 tire changes. You can use it for anyone but you have to be at the vehicle when the tow truck arrives at the vehicle. I have had a membership for 16 years and it has easily saved me $10,000 in tows if not more
Love that bumper nice work!!!!
Haha that’s so true. I get impatient near the end of trimming things and then aww damn it too much. 😂👍🏽
Ryno tell Chris to put some in weld on that whole! When there small ass wholes like that works every time. Sounds jank but I swear it works and it only cost 12$ to fix and no one will ever see it and you won’t leak 1 drop of water! Just have to get it in there good it’s just a small whole in the copper behind the fins on the radiator! It’s worth a shot! Same thing happened to my street bike and rocked jb weld on the radiator for over 2 years before I sold it never had an issue!
I broke down twice with holes in my radiator and this worked. first time was late at night, limped it to super walmart and bought some water eggs pepper and a potato. took my grill off and grated the potato into the radiator, it plugged the water and cooked on then, I cracked a few eggs and a handfull of pepper in and drove it an hour home. it was still holding water the next day.
the second time the plastic on the tank cracked. I got a hashbrown from mcdonalds and held it on the leak which was spraying out. sealed it up enough ito make it home. I did stop at autozone to get some bars stopleak but did not need it. my dads super old school and taught me these tricks. you guys should try doing just the potato before you swap it out, would be a cool video
What does the bbb truck stand for
The OBS just looks amazing!
Bumper spacing looks good now. Dope job man. 👍
I got a new Ford f250 1997 with a 7.3 when I finish it can I send it to you a ask you what you think plz and thx
I have an all stock, 96 f250 obs, with 96,000 miles and original engine in the truck, unfortunately its a gas, but its clean on the inside, no cracks or anything, all stock truck
So 2wd with 35s? What size rims and what spacers are you using if any? Truck looks awesome!
You can get any 05+ rear bumper just gotta drill 4 new hole on the frame and trim the bumper a tad bit they look slick
You should put a 17+ superduty rear bumper on the obs if it’ll fit
It will, they make brackets for it
I believe 6.4 rear bumpers are bolt on as well, I've seen a few videos and pictures of it but I'm not 100%
They are but need the 6.4 rear bumper brackets, drill two holes to mount bc they dont mount in stock locations and trim some of the bumper 👍
Some nice Led lights in the frame horn area of bumper would help clean it up.
OMG! If I lived in the area I would offer to come reset up that drum set!
Literally my dream truck
Always wanted a crew cab obs. But for the big spots in the front bumper, would be perfect for fog lights and the trim that comes with them. Idk what brand or style you would prefer
You need to tint and bed line that beauty!
That truck is coming together perfectly ryno!
Should just put a heavy duty aftermarket bumper in the back like ranch hand(commonly used) they just bolt right up and they look sick and more sturdier my opinion
Love the look of your obs Ford there. I miss the 79' F-150 we had in the family. What a great, fun old truck. Scary with brakes and steering, but still fun! Surely somehow you could find a stock bumper for that obs somewhere.
You should do a ranch hand rear bumper. It looks good and comes powder coated black.
Those desks hold monitors that come up I have one at my work
I want one lol
You should put rigid light bars in your bumper to fill in the holes!
How much are the jumper cables that Wes makes
I wish you would get back to me I don’t do social media sorry
When is the Milwaukee sponsorship coming
What about a roll pan? And custom fit some folding side steps like the newer fords that way u can still get into the bed with out scratching the good ol OBS
you should get with FLOG and see if they have an insert and the hooks you could use on the OBS bumper.
If you were to place some inserts into your OBS bumper then you should add some lights as well.
My back bumper on my 05 f150 has the same tear out on the bottom and it happened when we were pushing it with a tractor and a chain hook caught the lip and pulled it out.
Hey Ryan might have one of those switch panels a factory ford one.
No idea on the back bumper swap but the front looks great. 👍
OBS is not better you are still building it so it’s more interesting at this point.
that color is sick!!!
Those things that pop out of the desk are to put a monitor on. When not in use you click it down and you have a full desk
Like your pot plant on this kitchen table. Lol !!!
That would be a Money tree
@@DMAXRYNO 👍💵
Great video brother keep that grind
Up and getter done
Ranch hand all day makes the best bumpers
Coming to a city near you: DMAXRYNO and his magnificent rotary tool tunes.
Sweet pearl drum kit.
Dude you need a gm obs now that’s something I wanna see.
That’s obs looks killer
I want an obs cuz of the obs videos
That's a Badass FORD👍💪🇺🇸
vacuum flex engaged lol now I want one
Funny A..F...!! The Wes forehead joke!! You said it so calm. Lmao
Hi I have a obs Ford as well and it’s 2wd how did u lift urs?
Hey my name is jorge I see you bideos that pretty cool i got a question for u where you get that piece for you obs for the windows switchs got a 97 also and I'm missing that tream piece for the windows switches will you shoot me a link for it I'll Preciate that
This video gonna give me dentist nightmares 😂
Please do a roll pan on the obs it would look so clean
Glad to see you wearing eye protection!
That would be sweet if you did a 4x4 conversion kit on the ford. Great vids bro
Hey what are the specs on Wes truck? Suspension and wheel size? I just got a 4 inch myslef
ruclips.net/video/khqwGwiBcCY/видео.html
Why don't you have flog make you inserts for the front bumper I think it would look killer
I saw one of these 4wd crew cabs on iaai.com (auction site). There was 2 I think but the one was very squished and the other was gas not diesel. Not sure if that matters?
Dude I’ve got a huge office I need to furnish. What’s up with them neighbors? I should bring down the ol’ gasser OBS and pick up some desks lol. Keep killing it. Oh BTW I’ve been seeing a TON of “Work For It” stickers up here in the Victorville area.
Being here in KC have you check LMC Truck for your obs? I’m becoming a ram fan but I love that obs and even your Chevy. Thanks for the vids
My neighbor has two of those trucks blacked out. Both with a crazy lift height ima see if he’s still selling one. I’m in canyon lake ca I’ll try to find an ad for ya
Those pieces are for sale on shapeways as well. They were made by a member of the Powerstroke forum. They are 3D printed. Do you have the link from eBay? I would greatly appreciate it
Have flog build you custom bumpers
you need a windshield visor for the OBS it looks good with the visor but it's up to you this is just my opinion
That fast forward dremel tool sounds like Neo entering the matrix.
Hey bud, I emailed you over a link to a site here in the Houston area that specializes in the OBS Ford trucks as well as other 'OBS' trucks, hopefully, it doesn't get lost in the spamz :P
Im still looking for the plastic window part for my 96 f150 lol cant find it without the all the wires also and when you do its like $65 haha. Good luck with that
are you going to put a bed liner in the obs
Need to tint the fishbowl! Truck looks great man
Ranch hand rear bumper? That would be super sturdy and would look pretty good I think
Yo what are those black spikes in Chris's bed towards the back? I've noticed those on several of y'alls trucks. I've always wondered what the story is with those.
Also a deburr tool (usually used for copper pipe) works good for cleaning plastic edges after cutting. I used to cut out snowmobile and jeep hoods made of lexan and we used those deburr tools to clean our edges.
The spikes in chris's bed are flagpoles made by speed pole when not running the flags they give you the spikes to have a a cleaner shorter look without removing the whole thing
@@joshwoolstenhulme3035 thanks!
The Dremel sounds like the baby trex in the second Jurassic park before you sped it up
i've literally heard jazz saxaphone that sounds like that milwaukee tool sped up 😂😂
Where did you buy the wiring harness for the switch
Ryan you have so much time into the OBS just SAS swap it and get it over with
Personaly both your trucks are awesome ! Just sayin
Put a 6.4 bumper on the rear I feel like it would look good
Love the OBS
My 15 GMC Sierra same thing happened with the radiator