Bro how did you fit the clutch kit an the lockdown kit an the 3rd bearing kit????? Im going push start on my bigfoot now because I could not get the clutch to fit
@@Awsometurtle20 haha yep! And no its actually pretty simple it screws into the coil and then you heat shrink it around the coil where it goes into it. Its legit! Your welcome man
@@Awsometurtle20 anytime. I have no problem sharing the knowledge. Been building these things sense i was a kid and im 31 now haha..keep me posted on the build then 👍🏼
Both actually lol...if you run the silencer its not so bad but absolutely not as quiet as the stock muffler can. But you could expect 3-5mph out of just tossing a pipe on, give the engine some more fuel and I assume you run a aftermarket air filter already.
nice vid. is dominator pipe or the ada s2 better? i have dominator pipe on my cy29 bigbore and its super loud i don't feel like it gained much power but i could be wrong
Yesir usually just need to give it some more fuel. By turning the H & L speed screws out slightly. But you always wanna check your spark plug to get a good idea of how its running. You dnt want the plug to be white it should be a nice coffee color, light brown is good! I always test mine WOT loaded then instantly kill the engine and pull the spark plug to see. (Make sure you let it cool before touching the spark plug)
Yes it’s normal for a 2 stroke engine to smoke its the oil in the fuel burning off. Perfectly normal in fact if it wasn’t smoking ide be a lil concerned. 🤘🏼
Is the CY29RC a clone of the G290RC with just a 2 bolt top? I wanna know what Chung Yang engines are equivalent to what Zenoah engines. Also, does the ADA S2 and Sikk Torque have the same sound?
No and no. Zenoah makes one engine and Chung Yang mankes the cy29rc..the pipes have different power bands and sounds imo the s2 is a much better pipe not only is it thicker/ stronger its also got a really good low to mid range power and still pulls top end like crazy! I prefer the zenoah g290rc engines only bc they are 4 bolt vs the 2bolt cases, 4 bolt is obviously more reliable. Although I haven’t had any issues with the CY29 after i used the steel reinforced base gasket.
@@JesseK410 Ah ok. Yeah I just got a G290RC put on my Sport making it a Super Sport now, along with a Sikk Torque pipe, along with some other things such as wider bars. I wanted to put an ADA S1 pipe, but I couldn’t find one, so I just went with the Sikk pipe. Fuckers going to haul ass. I’ve been meaning to mod it for years, but just got around to it.
Unfortunately i dont want to sell it. I just built it with all brand new parts from DDM and the rest i had. Its got several discontinued parts i would have a hard time replacing and this build is special to me bc i painted it the same color as my car! 🤘🏼 not for sale sorry man.
@@rodra72 you wouldn’t be able to idle without running a clutch setup buddy. Deff run the same setup as me and if u got anymore questions feel free to DM me on Instagram @JESSEK410 👌🏼🤙🏼🇺🇸
@@Steez510 out of all the ones u choose snap lol...hit up instagram dude hella homies w gopeds on there and thats were u post the pics u would get a answer real quick. My instagram is @JesseK410
Beautiful Ped👌
Thank you! 🤙🏼
Bro how did you fit the clutch kit an the lockdown kit an the 3rd bearing kit????? Im going push start on my bigfoot now because I could not get the clutch to fit
I used the spacer and the ADA mount that has the bearing built in..
What coil do u have? I like that spark plug cable
I used the factory coil and added the MSD wire and plug cap! Works mint and never falls off its a nice tight fit
@@JesseK410 ohhhhhh that’s how it’s done thanks man so u just like soder it on right
@@Awsometurtle20 haha yep! And no its actually pretty simple it screws into the coil and then you heat shrink it around the coil where it goes into it. Its legit! Your welcome man
@@JesseK410 ohhh dope man thanks for responding fr some people be gatekeeping 😂🤘🏼 Gonna pick up my first scooter soon
@@Awsometurtle20 anytime. I have no problem sharing the knowledge.
Been building these things sense i was a kid and im 31 now haha..keep me posted on the build then 👍🏼
Does a pipe reduce noise or increase speed?
Both actually lol...if you run the silencer its not so bad but absolutely not as quiet as the stock muffler can. But you could expect 3-5mph out of just tossing a pipe on, give the engine some more fuel and I assume you run a aftermarket air filter already.
nice vid. is dominator pipe or the ada s2 better? i have dominator pipe on my cy29 bigbore and its super loud i don't feel like it gained much power but i could be wrong
Ada s2. I have the dominator pipe too. Its basically design just for rc cars thats why its so small..and ohhyeah definitely really loud haha.
@@JesseK410 would you mind telling me your settings? H and L? im just curious
Once adding the pipe on do you need to tune the carb at all?
Yesir usually just need to give it some more fuel. By turning the H & L speed screws out slightly. But you always wanna check your spark plug to get a good idea of how its running. You dnt want the plug to be white it should be a nice coffee color, light brown is good! I always test mine WOT loaded then instantly kill the engine and pull the spark plug to see. (Make sure you let it cool before touching the spark plug)
@@JesseK410 thanks dude appreciate the feed back
@@MD-tr8fn anytime my friend! Happy Gopedding.
So I think I found the tune but smoking is that normal
Yes it’s normal for a 2 stroke engine to smoke its the oil in the fuel burning off. Perfectly normal in fact if it wasn’t smoking ide be a lil concerned. 🤘🏼
Is the CY29RC a clone of the G290RC with just a 2 bolt top? I wanna know what Chung Yang engines are equivalent to what Zenoah engines. Also, does the ADA S2 and Sikk Torque have the same sound?
No and no. Zenoah makes one engine and Chung Yang mankes the cy29rc..the pipes have different power bands and sounds imo the s2 is a much better pipe not only is it thicker/ stronger its also got a really good low to mid range power and still pulls top end like crazy! I prefer the zenoah g290rc engines only bc they are 4 bolt vs the 2bolt cases, 4 bolt is obviously more reliable. Although I haven’t had any issues with the CY29 after i used the steel reinforced base gasket.
@@JesseK410 Ah ok. Yeah I just got a G290RC put on my Sport making it a Super Sport now, along with a Sikk Torque pipe, along with some other things such as wider bars. I wanted to put an ADA S1 pipe, but I couldn’t find one, so I just went with the Sikk pipe. Fuckers going to haul ass. I’ve been meaning to mod it for years, but just got around to it.
Damn need you to tune my peds
Its honestly not to hard. You can always go by what color the plug is to figure out if it’s running lean or rich..
You want to sell this ped
Unfortunately i dont want to sell it. I just built it with all brand new parts from DDM and the rest i had. Its got several discontinued parts i would have a hard time replacing and this build is special to me bc i painted it the same color as my car! 🤘🏼 not for sale sorry man.
@@JesseK410 i wouldnt sell it either its sweet tho!
@@Gopedhitta954 thanks man I appreciate it!
@@JesseK410 yea like that s2 pipe love that pipe.. the sound and power is amazing.. and very hard to find.. need ped ,man
What’s top speed
40mph on this one with the S2 and clutch setup could probably go faster with my S1 pipe and removing the clutch
@@JesseK410 what happens if you take out the clutch? It'll stall if you idle?
@@rodra72 you wouldn’t be able to idle without running a clutch setup buddy. Deff run the same setup as me and if u got anymore questions feel free to DM me on Instagram @JESSEK410 👌🏼🤙🏼🇺🇸
Yo your snap active? I added you bro
No i dnt use snap just instagram
@@JesseK410 dam okay. I wanted to send a pic of this pipe no one knows the name. And i never made any other social media. Only snap..
@@Steez510 out of all the ones u choose snap lol...hit up instagram dude hella homies w gopeds on there and thats were u post the pics u would get a answer real quick. My instagram is @JesseK410