Man this channel is awesome. I wish i was closer to you guys. Would love to have you take My wheel horse d180 with factory optioned front loader.....get it all good to go and get the swapped in b&s twin cylinder running way better
It's often unrecognized, but props to the camera man, or woman (Mrs Redbeard?). I'm doing an SXS engine conversion and wanted to capture it on video, but it's hard to find someone who is willing to sit out in the garage for hours capturing the best video shots :/. Anyway, nice camera work!
I have a John Deere AMT600. It has a similar brake setup and I've been dreading having to service them some day. That really didnt look so bad. Now that I know the HF ultrasonic cleaner seems to work well I'll be picking one up. The small size will be okay for me with a limited space for equipment that I have. 👍👍
Could you find a basket from cookware to fit in the harbor freight ultra sonic cleaner ? That way you could just lift the basket out except for the tiny bits , unless you make one with a screen on the bottom
My mother in law watched this video with me and my wife and kid's. She was like hey is he using a cookie sheet. I said yeah I do it all the time when I rebuilt carberaters for me or friends of mine. I said so I don't make a mess. She goes really I nodded yes. My wife goes mom he uses the old ones. She goes that's good my oldest goes u gotta see what dad does with the cake pans. She was like 😨cake pans. And she was eating peach cobbler. And she sets the plate down. And my wife goes mom he uses the old cake pans. I showed her what I use them for. I am rebuilding a carb for a friends dad. And I said it's soaking to get all the dirt and grease off. I said it will look like that shiny one there. She was like that's cool.
There was a major motion picture some years ago called Argo. Starred Ben Affleck riding an Argo around in Iran solving crime or something like that. I don’t know, I didn’t see it...
Great video. Always try to use new split pins if you can. Keep up the great work guys. And when are ya making the video of the trailer for the mobility scooter?
just a tip don't put parts directly in the ultrasonic cleaner without the basket it is very likely you will damage the piezoelectric transducer that drives the tank if that happens your ultrasonic cleaner will permanently lose most of its cleaning power
I still have/wear the shirt where I did NOT cover up the piston exit when I pushed compressed air into the fluid port. Yeah, that was dumb. Looks like a wrenching-man wore it. -=Doug
Way off topic, but for you think the duromax is better than the predator? Had a predator 212 and 30 series ready to go for my little girls go kart re build and some one thought they needed it more than I did, dirty thieves.. so before I go buy another, just curious if quality and power is better with the duromax. Thanks in advance for any feedback
Got a 2002 Argo Conquest. Had people look at it right side brake gets spongy have to stop and pump it up before going again. They say they have bled the calipers but the right side still is spongy. Put on new master cylinder , bled everything again still have problem on the right side. I’m going to swap calipers right to left and see if problem moves or stay the same. Any other ideas to remedy the problem?
Hello sir im your followers! Could you please explain standard camsharft vs racing camsharft for gx390 18hp. And how to know if standard or modified racing cam?
Hey man, I was gonna leave a comment on one of your other videos from 2017, about the predator engine. It seems to me that you know your stuff and well I know nothing haha. I was having some problems with my carb, my butterfly lever is sticking wide open even with the return spring and everything on there. Absolutely no throttle response unless I use the choke as my throttle. Which in my case is not that safe being my minibike is like not even a yard long haha. If you could help me I'd really appreciate it. Thank you.
Had to laugh, used rubber glove to block the holes when blowing out the piston, but not on your hands when working, saves time scrubbing hands when done.
Great brake caliper rebuild demonstration RBG.
Cool. First time I have ever seen one that split in half.
Thanks RB. im doing the exact same on my argo tomorrow.
Man this channel is awesome. I wish i was closer to you guys. Would love to have you take My wheel horse d180 with factory optioned front loader.....get it all good to go and get the swapped in b&s twin cylinder running way better
Nice work.
Good stuff as always, Red Beard!
Where can i buy a ct200u bike at i want one so bad but everyone i see is 38 inch i think its small im 5,7
It's often unrecognized, but props to the camera man, or woman (Mrs Redbeard?). I'm doing an SXS engine conversion and wanted to capture it on video, but it's hard to find someone who is willing to sit out in the garage for hours capturing the best video shots :/. Anyway, nice camera work!
Do you have a link for that rebuild kit? And great content really helping me fix my own argo THANKS!
I have a John Deere AMT600. It has a similar brake setup and I've been dreading having to service them some day. That really didnt look so bad. Now that I know the HF ultrasonic cleaner seems to work well I'll be picking one up. The small size will be okay for me with a limited space for equipment that I have. 👍👍
Could you find a basket from cookware to fit in the harbor freight ultra sonic cleaner ? That way you could just lift the basket out except for the tiny bits , unless you make one with a screen on the bottom
My mother in law watched this video with me and my wife and kid's. She was like hey is he using a cookie sheet. I said yeah I do it all the time when I rebuilt carberaters for me or friends of mine. I said so I don't make a mess. She goes really I nodded yes. My wife goes mom he uses the old ones. She goes that's good my oldest goes u gotta see what dad does with the cake pans. She was like 😨cake pans. And she was eating peach cobbler. And she sets the plate down. And my wife goes mom he uses the old cake pans. I showed her what I use them for. I am rebuilding a carb for a friends dad. And I said it's soaking to get all the dirt and grease off. I said it will look like that shiny one there. She was like that's cool.
Dang look at that water 😳
I'm wanting to order a brake caliper kit from go power sports , is the rbg10 code still available ?
There was a major motion picture some years ago called Argo. Starred Ben Affleck riding an Argo around in Iran solving crime or something like that. I don’t know, I didn’t see it...
Whelp! I don't have an Argo, but that was another great video!!!
One thing about brake fluid is dot 3 and dot 4 are a lubricant but dot 5 has the highest boiling point but does not lubricate.
Looks very much like motorcycle front brake caliper. Usually need doing every 2-3 years depending on usage and weather.
How long did it take before you realized you put the pistons in Backwards?
Great video. Always try to use new split pins if you can. Keep up the great work guys. And when are ya making the video of the trailer for the mobility scooter?
Water ,Lemon juice for carbs try it cleans carb good
just a tip don't put parts directly in the ultrasonic cleaner without the basket it is very likely you will damage the piezoelectric transducer that drives the tank if that happens your ultrasonic cleaner will permanently lose most of its cleaning power
I still have/wear the shirt where I did NOT cover up the piston exit when I pushed compressed air into the fluid port. Yeah, that was dumb.
Looks like a wrenching-man wore it.
-=Doug
Way off topic, but for you think the duromax is better than the predator? Had a predator 212 and 30 series ready to go for my little girls go kart re build and some one thought they needed it more than I did, dirty thieves.. so before I go buy another, just curious if quality and power is better with the duromax. Thanks in advance for any feedback
Got a 2002 Argo Conquest. Had people look at it right side brake gets spongy have to stop and pump it up before going again. They say they have bled the calipers but the right side still is spongy. Put on new master cylinder , bled everything again still have problem on the right side. I’m going to swap calipers right to left and see if problem moves or stay the same. Any other ideas to remedy the problem?
Hello sir im your followers! Could you please explain standard camsharft vs racing camsharft for gx390 18hp. And how to know if standard or modified racing cam?
Were. Can I get a longer 40 series belt and how do I measure for it
Hey man, I was gonna leave a comment on one of your other videos from 2017, about the predator engine. It seems to me that you know your stuff and well I know nothing haha. I was having some problems with my carb, my butterfly lever is sticking wide open even with the return spring and everything on there. Absolutely no throttle response unless I use the choke as my throttle. Which in my case is not that safe being my minibike is like not even a yard long haha. If you could help me I'd really appreciate it. Thank you.
Hey sence ur a big brain I'm getting a mini bike and I wanted to know if I can add to people on it
Hey does anyone know what size the throttle cable for a 2002 Manco dingo is i been trying to find out but can't find it came here looking
Had to laugh, used rubber glove to block the holes when blowing out the piston, but not on your hands when working, saves time scrubbing hands when done.
Can't see shit, turn the auto exposure/contrast off in the camera settings