2015 Ford Fusion Titanium Engine Ambient Air Temperature Sensor Replacement
HTML-код
- Опубликовано: 13 сен 2024
- Here is a quick video for the Feb. 2015 model year Ford Fusion Titanium Engine Ambient Air Temperature Sensor. It is located on the passenger side lower Grill area closer to the fog lights. This person called me having an issue with the ambient Air Temperature displayed on the instrument cluster I connected my multimeter and got an OL reading from the old sensor up front so I purchased the part which was around $20 plugged it in and temperature was displayed correctly after replacing. Make sure you check us out at GearHeadzClothing.com
![Eminem - Fuel (Shady Edition) feat. Westside Boogie & GRIP [Official Audio]](http://i.ytimg.com/vi/k1OquBida9s/mqdefault.jpg)
Simple & direct. Thank-you. Just needed to know which side of Fusion to focus on after headlight replacement & received amb temp error. Must have not connected it firmly when reinstalling the bumper.
I have a problem with my 2014 Ford C-Max Energi headlights always on even when theyre in the off position.
@@marcosramos4596 just seeing this, if it’s fixed, GREAAT!
If not, I would look into an issue with the headlight module or a possible short to ground that is keeping the lights illuminated no matter what the switch position is.
Thanks for watching, I hope that helps
Does this sensor make your headlights stay on all the time when its goinf bad?
I have a 2013 Ford fusion 2.0 turbo titanium and I can't find where the sensor is, it always has a temperature of 10 degrees even though outside and when I pass puddles or water it drops to minus 40
@@YgorZombieMan hey there
I’m not certain if it’s in the same location on the 2013 but if it’s the same body style maybe get a second set of hands if you haven’t already to make sure the area is well lit. If I find any other information on it for your vehicle year I will post it back in the comments. Thanks for watching
@@reyc6158 Until I finally found it, it was on the left side of the vehicle below the headlight and near the radiator. There was no sensor, there was only the harness and I found it by trial and error, since the repair or user manual did not say anything. The temperature was kept at minus 40 degrees Celsius for more than
@@reyc6158 For more than 30 minutes and then gradually increased until the ambient temperature was measured correctly.
Do you have to take the bumper off to replace?
Hello, no I didn't have too. You have enough room to get to it without taking it off
This guy in the video took off the front grille, which should be relatively easy to do (I hope lol). It is a little tight to grab it otherwise, I think. The idea of taking out the fog lamp seems too far fetched.... but maybe it is also an option. I looked at the spot and my slender fingers are not slender enough to grab it just like that. So, I am going for the decorative grille.
My car external temp reads 50 degrees when it's actually 90 degrees it somehow is not letting the a.c. cool becouse its making it thing its cooler than what it actually is.
hello danilynn did you get it fix ? if so what was the problem im having the same issue, it will work for a couple of mins and suddenly the temp will be in the negatives and the a/c won't turn on when its like 100 degrees outside
@@MrFitzfn Did you fix the issue? Im have the same problem!
Let us know if replacing the sensor fixed the AC issue. Having the same issue here.
My car's Air sensor has been broken and I had new one but the AC doesn't work, it blows hot air although the sensor reads temperature well (31 Celsius degree).
I need to know how this can be fixed??
Thanks in advance 😊
Aaron Yaddow hi there, did you solve this problem? And how? Thanks
you did not show how to replace sensor.
Sorry, once you get to where the sensor is located. It should be held in by a clip, work the clip out or use a clip remover if you have it, disconnect the sensor and install in reverse order.
Were we get that sensor any link many thanks
Where did you get access? Throw the wheel well or fog light area?
Fog light area bro
Thanks, I'll check it out
Without information on how to remove the old and install the new, the video provides no information of value
Where can I purchase the sensor, I’m having a similar problem on my 2016 fusion
I got it at from a friend who works at Ford. I am in California
Anyone know where the sensor is on the 2017 fusion sport v6 2.7 liter ecoboost?
Hi am looking for the sensor for outside temperature many thanks
It is that one!
I have p0098 code . 2015 SE. can the same sensor be the issue . My temp reads fine
I cant say for certain, but I think that code is for Intake air temperature and that sensor is more ambient (outside) temperature. So I would not replace it for that code
Where do the wires go to on the other end
Why do you care? Just wondering....
@@velvetpaws999 I replaced sensor still -40 and air don't work
Lo solucionaste?@@RandyWeisner-og8hv
Is this the same for a 2013 Ford Fusion SE?
Hey, I'd have to look into that, i'm not sure off the top of my head. Are you having similiar issues?
Is it same as a 2015 ford edge?
Off the top of my head, I'm not sure.
Is that for the outside temp?
Yes outside temp