#rubikscube #hardcore #cuber This is the Hallow stocker axis cube! A sticker variaton of of the axis cube! Check out my socials 👇 Instagram: / souptimmy Tiktok: vm.tiktok.com/...
Okay I figured it out 😂😂😂All I had to do was solve it like a Mastermorphix because the corner piece on the hallow axis cube has 3 correct flips so I can use that as a buffer when I flip the long corner piece
Hey bro......try putting that flipped centre in top layer and apply this algorithm < L U L' U > and repeat this until the your cube is whole solved because it is looking like mastermorphix. All the best and hope you read this👍👍
With the regular axis cube i face the same in the end where i get the middle piece of 3rd layer flipped so what's the algorithm for that ? Edit.... Thnx bro that worked L U L' U
@@SoupTimmy ok 2 things No.1) wow Actually a real popular youtuber replied and now for No.2) I am no speedcuber I am an average cuber and my pb for normal 3x3 cube is like 2min 50s. So I know nothing as much as you would. They looked same so I guess they are lol.
pretty sure theres some kind of software to generate algorithms for any twisty puzzle, if i find it ill edit my comment. maybe you can find a tutorial for the base cube of the mod?
Do u also hate when you put up a good comment then the yt gives it a like and replies to your comment... but *a random person replies to the yt's reply and tries to take your moment of fame?* I fully *HATE WHEN IT HAPPENS*
There are some invariants on the cube. You cannot orient a corner. You can rotate 3 corners in the same direction or rotate two corners in oposite. You cannot orient a edge. Same, You can rotate 2 of them. You cannot permute two corners, only three. You kinda cannot permute two edges. Well, You can, but it rotates center piece, also, obviously, You cannot rotate center piece alone. You need to counterrotate other piece or permute two edges. In mastermorphix there are two corners with unknown orientations and three edges each color which look the same (unknown permutation). So, if You wanna orient single wrong corner, You need to also rotate those orientationless corners, because invariant says: 3 at once. I suppose same here: there are some pieces with known and with unknown orientation/permutation.
The corner being flipped just means you have to flip that corner using beginners method and also flip the corner that’s the same in every way, that should work
I think I've run into this situation before on my ghost cube, which is VERY similar to your puzzle. Sadly I think the only way to fix it is to take it apart. I would suggest looking at the directional patterns of the stickers, but there are none for your puzzle.
In most of those shapemods there is atleast one or two corners that don't care about orientation so you can make a OLL to orient the wrongly oriented corner as long as it also only changes the corner sprcified at begining of my comment.
its like a 2x2 mirror cube corner. flip that corner, then go to a corner that can be the same on any side of it and do the 4 moves RUR'U', it should work. its just 2x2 mirror cube corner parity
Solve it just like regular 3x3 cube. When solving last layer, first solve the centre piece with regular cross only then move on to solve as you on regular cube
That case is actually the oll case 23 or 24. One wrong piece is the flipped corner and the other wrong piece is the biggest conner ( the one with the pyraminx shape)
Just a simple corner flip should work. The 3 colour corner piece can be flipped in any way and still be the same orientation. You can flip that and this corner piece to solve it.
Axis cube has the probability of parity in top layer where cross won't appear. There's an algorithm (you can formulate your own, if you'd like) to figure out how to flip that one edge in forming cross then there you go, proceed to next steps until it's solved
When center is twisted use U perm till it's good. Like 3 times U perm twists by 90 degrees and T perm flips by 180 degrees (algorythm R U R' U also flips by 180)
Solve it the same way as normal, you’ll have to do a bunch of parities with the large corner, as it doesn’t matter it’s orientation, as well as the center flipping alg
the corner piece (like a 3x3 corner looking one) you need to flip the corner piece i know how to do it because I tried to solve axis cube (mixing it and trying to solve it with all the pieces on the wrong places) so yeah just try to do the 3rd layer again
If you are not able to rotate the last center piece which means you have solved it wrong way. May be you have fliped two wrong edges. So replace any two long edges. It will be solved
You can flip the center by putting the flipped center on the right side and do 2 T perms😊😊 (if you didn't hold it on the right side you will mess it up)😢
Okay I figured it out 😂😂😂All I had to do was solve it like a Mastermorphix because the corner piece on the hallow axis cube has 3 correct flips so I can use that as a buffer when I flip the long corner piece
congratulations you got it
Congratulations. u should make a tutorial on this cube.
do J perm x2 bro
@@SkibidiAnhDũng bro that flips it 180 not 90
😂😂😂
"second layer" me : *trying to see the second layer*
It is hard to know second layer on axis cube but i know
@@Ray-jz3os 🈚️
3.5635287th layer
When I see your comment like 999 I give 1like it now *1K* lol😂😂😂😂😂❣️❣️
@@easywolfilove3661 🈹🈲🈶🉐🈷️🈂️🈹🈷️🈶🉐🈶🈹🈲
“There were no tutorials of it”
*sees one right in front of him* 💀
I noticed it’s a ghost cube lol
Look at it carefully it's not that one
That’s a ghost cube
That’s A Ghost Cube
A bruh cube
Trueee
Best way: Reverse the video that you recorded
Bro you are actually genius tho
Bruh🤯
Ripley god mf
Tru
Bro
“Yay I finally finished it!”
That one tiny bit left
*dies*
How cute 😊
UwU
Uh.. what in the holy church am I witnessing in here
@@mopwaters1994 something which is unholy as f*ck
Me to
Hey bro......try putting that flipped centre in top layer and apply this algorithm < L U L' U > and repeat this until the your cube is whole solved because it is looking like mastermorphix. All the best and hope you read this👍👍
With the regular axis cube i face the same in the end where i get the middle piece of 3rd layer flipped so what's the algorithm for that ?
Edit.... Thnx bro that worked L U L' U
“It did not flipped”
I see, it is a loop
Bad grammar
@@harrisrobertson7970 Bad grammar.*
@@PlzDoNotTheFade english teachers be like: I'm so proud of you. 😌✊
@@harrisrobertson7970 who the fuck care
@@harrisrobertson7970 bro nobody gives a flying fuck about grammar its 2022 get real
First one to makes a tutorial on this cube I’d give you a gift card to SpeedCubeShop 🙂
Maybe me?
I can try tho
Very confusing
I wish I could help I still can't figure out the normal one
Can you make it 😂😂😂
I want it too lol
This is the cube that never ends
"No tutorials"
The third video on that RUclips page: am invisible
That’s not the same cube
@@SoupTimmy ok 2 things
No.1) wow
Actually a real popular youtuber replied and now for
No.2) I am no speedcuber I am an average cuber and my pb for normal 3x3 cube is like 2min 50s. So I know nothing as much as you would. They looked same so I guess they are lol.
They are on the outside of the video but probably inside it was clickbait
@@maryamchannel3566 idk maybe it was
Ikr
"*no tutorials*" Proceeds to skip by one.
exactly and he said is not same cube but issss
@@helixipottah9675 No, it is different.
nah
That is not a tutorial it’s just unboxing or something
IKR
*The perfect loop never end-*
So this is why…
*giant lag spike*
I need you guy’s help
@@qcurtis6708 Welp
You are a genius
@@qcurtis6708i know, it's such a cheap trick and it doesn't even work
Me:getting so excited for the end
Him:”so this is why-“
Also me:(starting to rage)
its a loop bro
it's overrated
That was me too -💀
@@yeolde5463 wtf does overrated mean💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀
this almost sounds like the Moon Knight theme
Hence I am not gonna purchase it untill someone uploads its tutorial 😁
pretty sure theres some kind of software to generate algorithms for any twisty puzzle, if i find it ill edit my comment.
maybe you can find a tutorial for the base cube of the mod?
yes but this version has no colo
Wait fr?
It’s called Asolver
It solves these
You can get it on android or iOS
Tip: smash it
@@myxg cubexplorer on pc
how to solve one: just buy a new one
Not gonna do that for this one 😂
@@SoupTimmy lmao
Why no comments XD
@@SoupTimmy it looks expensive XD
Do u also hate when you put up a good comment then the yt gives it a like and replies to your comment... but *a random person replies to the yt's reply and tries to take your moment of fame?* I fully *HATE WHEN IT HAPPENS*
Me: idk how to solve this
Grandma: just think honey
Grandpa:💣⚒️
Just realized that your video loops perfectly
a lot of shorts actually loop
That's like all shorts nowadays it's kind of annoying actually
title: “help me solve this cube”
Me: no no no no
help ME
Dude I just finished my 1st 3x3
@@not_yayyy
Great job!!!
There are some invariants on the cube.
You cannot orient a corner. You can rotate 3 corners in the same direction or rotate two corners in oposite.
You cannot orient a edge. Same, You can rotate 2 of them.
You cannot permute two corners, only three.
You kinda cannot permute two edges. Well, You can, but it rotates center piece, also, obviously, You cannot rotate center piece alone. You need to counterrotate other piece or permute two edges.
In mastermorphix there are two corners with unknown orientations and three edges each color which look the same (unknown permutation). So, if You wanna orient single wrong corner, You need to also rotate those orientationless corners, because invariant says: 3 at once. I suppose same here: there are some pieces with known and with unknown orientation/permutation.
Use the algorithm R U R' U R U2 R" tomove the edges around
Won’t work, if the edges in the 2layer are flipped incorrectly
@@SoupTimmy my last trick is to use beginners method it always works
Him: “there were no tutorials on how to find this cube!”
Also him: Goes right past a tutorial
Bruh.... It was the same stickers but not the same cube
yah
It's ghost cube
The same thing happens to me with the Mastermorphix, you have to try different pieces haha
him:”there was no tutorials”
me:”you blind my guy?”
Ur blind ☠️
It's ghost cube
*Homie proceeds to say corner the centre and the centre the corner😩*
*Me having anxiety😱😤😖😩*
Only cubers will understand.
bruh you're looking at it like a cube. The axis cube isn't technically in the shape of a cube so you're wrong
I love your channel 😍
Solution (I think): fix the peice in the second layer. Then do the last layer again using the beginner method.
“Turns out I breezed through the cube very easily”
Cube: “I’m boutta end this mans whole career”
Hi SoupTimmy love ur vids!
Just looking at this makes me feel like my eyes are gonna be stabbed
"The box you opened it..."
the big corners looks the same from any rotation, use the beginner corner rotation alg. to twist the unsolved corner and the be corner on that layer
“NO TUTORIALS”
Me: sees him scroll past one
Yeah right-
Ur blind ash ☠️
It's ghost cube
Is I am the only one who see that that cube picture on that RUclips 🤣🤣
Did you have a stroke making this comment
That’s not the same cube, one of the screen was a ghost cube
SoupTimmy: NO TUTORIALS!!!!
me: yes like there is no 5 video nah nah
The loop is perfect
"So this is why. I need your guys' help"
“There were no tutorials on this cube!”
Me: yeah isaw a vid of it
It was a review of the cube bot how to solve it
It’s not a mistake, it’s a ✨MASTERPIECE✨
The corner being flipped just means you have to flip that corner using beginners method and also flip the corner that’s the same in every way, that should work
I literally saw another one of those when you wanted a tutorial
That was the ghost cube, he had the hallow sticker axis cube. You might not be able to tell, but theres a difference.
@@itchylav4027 oh ok thanks for telling me
Him: “this is where things went hard”
Me: “…hehe”
That’s what she said lol
I think I've run into this situation before on my ghost cube, which is VERY similar to your puzzle. Sadly I think the only way to fix it is to take it apart. I would suggest looking at the directional patterns of the stickers, but there are none for your puzzle.
"Thats when things went hard"
My dirty mind: I THOUGHT WE WERE JUST TALKING ABOUT PUZZLES-
ayo this is sus
@@litshieldphstudios7834 i wish I didnt have a dirty mind
"No tutorials" (video with the exact cube in the thumbnail)
In most of those shapemods there is atleast one or two corners that don't care about orientation so you can make a OLL to orient the wrongly oriented corner as long as it also only changes the corner sprcified at begining of my comment.
Exactly and this puzzle has 2
That’s basically my experience with the ghost cube lmao
The tutorial of this was on the screen
Pretty sure that was a review
its a review
@@SJW_plays it's different cube name ghost cube
It's ghost cube
its like a 2x2 mirror cube corner. flip that corner, then go to a corner that can be the same on any side of it and do the 4 moves RUR'U', it should work. its just 2x2 mirror cube corner parity
Do you think that you could make the thailand flag? 🇹🇭 Since my dad and his side of the family are from there, if you can that would make my day :)
Go ask him in tiktok.
Peel off the stickers
Oh wait u cant cuz its a twisted piece
Well done lad 😂
“This is where things went hard” The most sussiest statement on Gen Z humor
Just look at it from the other side
Sure and cover the other side so nobody sees it
“Went hard”
Him: It’s a sticker modification of a regular axis cube
Me: Soooo… a ghost cube??
the waffle house has found it's new host
Stop that, i hate that sentence-_-
Him:I need help from u guys
Me: YOU DO YOUR THING THERE I WILL DO ANYTHING I WANT IN MY PHONE
Algorithm to solve flipped center: flip so the flipped center is facing you and then repeat R F R’ F
then: please help me solve this rubiks cube
now: please help me solve this cube
future: please helpo me solve this block
Him:No tutorials on the Hallow Axis Cube
Me:Watch a tutorial on a normal Axis Cube since it's just a sticker modification.
Solve it just like regular 3x3 cube. When solving last layer, first solve the centre piece with regular cross only then move on to solve as you on regular cube
Him:no tutorials
Me:WTF THE TUTORIAL WAS RIGHT THERE
That case is actually the oll case 23 or 24. One wrong piece is the flipped corner and the other wrong piece is the biggest conner ( the one with the pyraminx shape)
Him: THERE WAS NO TUTORIAL
me: **see's a thumbnail of that cube**
Hey can you do a detailed video of solving 4x4 cube 🥺
You should do a reversed solve where you have a solved and a normal cube and you try to Match the solved with the scramble
Is no gonna talk about bc at the end he said "this is wh-" then it ended
Thats why u learn it, then speed scramble it.
Just a simple corner flip should work. The 3 colour corner piece can be flipped in any way and still be the same orientation. You can flip that and this corner piece to solve it.
How to solve:
Step 1 - throw away
Step 2 - buy another one
Step 3 - wait
Step 4 - unbox
Step 5 - your done
Him: The center is flipped.
Me: But isn’t that the corner?
Also him: The corner is flipped.
Also me: But isn’t that the center now?
Me: *turns the corner * me: I AM INEVITABLE
Axis cube has the probability of parity in top layer where cross won't appear. There's an algorithm (you can formulate your own, if you'd like) to figure out how to flip that one edge in forming cross then there you go, proceed to next steps until it's solved
him: no tutorials on this cube
*me seeing one*: 👁️👄👁️
"I thought it was hard, but TURNS out... "
Pun intended?
Him :(solving this mess) meanwhile me: (struggling with 3x3 😂)
Him: I SAW NO TUTORIALS
Me: *Sees that same exact cube on a tutorial
Him: *scrolls by a tutorial*
Me: *hands blind stick*
Casually saying "there are no tutorials on this cube " while having a tutorial in front of you.
"i couldnt find any tutorials"the second video on youtube"how to solve the cube with a few easy steps😂
When center is twisted use U perm till it's good. Like 3 times U perm twists by 90 degrees and T perm flips by 180 degrees (algorythm R U R' U also flips by 180)
You’re supposed to take out that piece and flip it around 😂
oooo i got a good idea
solve the cube.
Solve it the same way as normal, you’ll have to do a bunch of parities with the large corner, as it doesn’t matter it’s orientation, as well as the center flipping alg
“No tutorials” me literally seeing one when you scrolled down
how to get normal cubes and not flipped:
1. go and meet mrbeast
2. ask him for $400,000
3. buy the cube
4. dont solve it
The "normal" version of this cube is the "idle" object I have on my desk to fidget when I have nothing to do. I love it
Solution: Look for an identical pair for each the corners and edges. Swap them using setup moves and Fperm or Vperm and the center shall solve itself
Shame on there being no tutorials on how to solve the cube he struggled with.
the corner piece (like a 3x3 corner looking one) you need to flip the corner piece i know how to do it because I tried to solve axis cube (mixing it and trying to solve it with all the pieces on the wrong places) so yeah
just try to do the 3rd layer again
Me when I hear axis:*FLASBACKS*
If you are not able to rotate the last center piece which means you have solved it wrong way. May be you have fliped two wrong edges. So replace any two long edges. It will be solved
Try disassembling and reassembling the cube (hope this helped 💯💯)
Hey i think your rubiks cube stand is cute
"There was NO tutorials" Me seeing a tutorial with the same cube💀💀💀
This is your daily reminder to touch grass🌱
Him: I need your guy’s help
Me: simple *hits it with Mjölnir (Thor’s hammer) and glues the pieces into a cube* :p
You can flip the center by putting the flipped center on the right side and do 2 T perms😊😊 (if you didn't hold it on the right side you will mess it up)😢
I am 100% sure that everyone thought this was a ghost cube from the thumbnail.
Just break it and arrange it back together and do a little modification.. i tried it and it worked
Well done. Looks super hard, and I can’t even solve a morph 3x3