Redcat Ascent 18 Gets New 828 RC (Tyler Chapman) Links Installed & Suspension Geometry Discussion.
HTML-код
- Опубликовано: 2 авг 2024
- We install the 828RC (Tyler Chapman) Suspension Links on our @RedcatracingAZ Ascent 18. We also go deep into some tips and tricks (with links AND shocks on this guy) as well as have a discussion about link geometry.
Here is how to reach 828RC/Tyler! (be sure to let'em know The Shop sent yah!)
828 on Insta: / _828rc_
Facebook: / tyler.chapman.5851
Screw Shims (2mm to 2.5mm): ebay.us/nmVNTJ
Ascent 18:
www.redcatracing.com/products...
Here are the upgrade part for it! www.redcatracing.com/collecti...
Also be sure to join: / redcatracing18thscale
0:00 Intro
5:00 Get it Apart! (Removing Shocks)
7:26 Drilling Holes For Ease of Removal
11:17 Will the Stock Balls Fit?
12:54 Shimming the Ball Joints
15:40 Free Up Your Balls
18:36 Longer Upper Links
19:09 Install Links
20:11 Shim Tips
22:06 Phase Your Shaft
23:08 Link Geometry
26:43 Putting the Shocks Back
28:26 Brass Steering Link!
31:26 Link Ball Discussion
#rcrockcrawler #redcatracing #ascent18 #828RC #rctruck #rctrailtruck #rockcrawlerrc #rccar #rc @RedcatracingAZ
Be sure to join this awesome Mini RC Discord Chat: / discord
Purchasing from these links may or may not help support the channel, just depends on the link! (But they are here for your convenience.)
We now have shirts and stuff! Find it all here:
my-store-4267224.creator-spri...
Join this channel to get access to perks: / @theshopminirc
RC Gear:
JoeRopes Lanyard and RigRopes: www.joeropes.com/shop?TheShop...
Flysky Noble NB4 PRO: amzn.to/3ntJooM
Flysky Noble NB4: amzn.to/3ZsA4Pt
Ovonic X1 Charger: amzn.to/42TYF2j
Ovonic Mate1 Lipo Battery Charger: amzn.to/3JYPsgy
900 Pcs Washers for Screws, 304 Stainless Steel Flat Washers: amzn.to/3TFt6FQ
1200PCS M1.6 M2 M2.5 M3 Stainless Steel Screws: amzn.to/3J0DmDz
560 Pieces M2.5 x 4mm /6mm /8mm /10mm /12mm /16mm /20mm, Button Head Socket Cap Screws Bolts Washers Nuts Kit: amzn.to/3PK9XBi
125 Pcs M3 x 8/10/12/16/20 Counter Sunk Screws: amzn.to/4agX6Pq
Bench Gear:
SKYRC Wireless Corner Scale Setup System for RC Cars: amzn.to/3TTMvVk
AMIR 28 IN 1 Cordless Mini Power Precision Electric Screwdriver Set: amzn.to/3VIAD6i
The Sickest FIELD BENCH EVER - Turtle Laboratories Portable Hobby Workstation Work Bench: turtlelaboratories.com/produc...
Pro'sKit 900-015 Helping Hands Soldering Aid: amzn.to/3DkNkfx
Lifegoo Heat Insulation Silicone Repair Mat: amzn.to/3Luf44d
SCX24 Toolset: amzn.to/35mjXgh
ANBES Soldering Iron Kit, Upgraded 60W Adjustable Temperature Welding Tool: amzn.to/3u7Owjq
UNIWEIGH Gram Scale,200 gx0.01 g( 7.05 oz x 0.001 oz)Digital Pocket Scale: amzn.to/3u71oWT
Servo plug splitter: amzn.to/3Z7678j
Recording Gear:
SmallRig 1/4" Camera Hot Shoe Mount, Ballhead Tripod w/1/4" Screw: amzn.to/3UxNhrb
ULANZI Super Clamp Camera Clamp Mount Monitor 360° Ballhead Magic Arm Double Ball Head Adapter w/1/4"-20 & 3/8"-16 Thread ST-07 Phone Tripod Mount: amzn.to/3ui7Tt0
Blue Yeti USB Mic: amzn.to/3J4Bnf4
Apple Lightning to USB3 Camera Adapter: amzn.to/3LvwaP6
Pasow USB A Male to A Female Extension Cable (50 Feet(15m)): amzn.to/3J4Bnf4
Camera Stand 1: Custom Built
Camera Stand 2: amzn.to/3wJszZH
Camera Stand 3: amzn.to/36wqwgZ
Camera Stand 4: amzn.to/36xhSib
70 LED Video Light with Adjustable Tripod Stand / Color Filters, Obeamiu 5600K USB Studio Lighting: amzn.to/3lK56Rq 
Развлечения
Thank you for the tip on the fishing line crimp. Saved my from pulling my hair out with my new injora shocks!
Glad to help!
Your tips'n'tricks are unrivaled.
Seriously top notch.
Thank you!
Happy to help! Thanks a ton for watching!!!
Ken gave me the idea with the bottom shock balls. I just carefully pulled them all off and used a heated crafting hook to melt a hole dead center. Just big enough to fit the driver. Took an exacto knive and shaved axles just enough to get the screw in nice an straight. I can pull them off with ease now and not have to worry about replacing them and use the little bit of disability
allowance i get per month, somewhere else on the rig. Thanks again Ken.
I am glad it helped you out!
Thanks for the shock removal tip! 🙏
Thanks for watching.
Thanks for the heads up about the 2mm single barrel fishing line crimp sleeves. I just ordered some to fix the slop in the 2.5mm holes in the stainless steel high clearance links pivot balls on my FX118 Fury Wagon being the mounting screws are only 2mm. They will work excellent to fix the slop in the pivot balls.
Nice!!!!
We have the correct pivot ball size now 😎🤙
Nice!!!!!! That will definitely make the process easier and a much cleaner install!
I am glad Tyler is making links still, he makes some of the best! He hasn't responded to my request in quite some time so I figured he may be busy with that rebranding! I will try hitting him up again soon!
I know he is super busy trying to "officialize" his business. I am sure he will get back to you as soon as he can!
I ended up getting the HC links from 828RC, and was unpleasantly surprised to find out they were just thin sheathing around some all-thread (both the brass and the aluminum). Esp for how much they cost. You didn't happen to weigh them by chance? I didn't feel like taking the whole truck apart again just to weigh the links so I did a guess based on the front steering links and was even more disappointed. Turns out the aluminum steering links weighed a total 4.8g, the brass came in at 6g... not as big of a difference as one would expect between "brass" and "aluminum", but makes more sense when you realize the only actual difference between them is the very thin sheathing around the all-thread. The only reason I even realized that much was cause almost every time I've had the truck out, even without tumbling or being hard on it, the links were popping out of the ends from something as simple as the tire getting stuck and the axle torquing.
Then I discovered that the Redcat brass steering link (since they only did the main one) actually weighs more than 828's "brass" steering links. Thankfully Injora and Treal have since come out with their own upgrades and their steering links weight 11g and 13g respectfully. Heck, Injora's stainless links appear to have a solid 20% more weight for their suspension links than 828's brass set.
Just wanted to put this out there incase anyone else wasn't aware that a lot of the 3rd party upgrade links aren't quite what they appear to be esp for the high price. But that's also mostly on me for not asking enough questions beforehand and getting caught up with his selection of available colors.
I was not aware of their construction but I know man others are built the same way. I have not had any issues with the links end pulling out of the threading though.
Nice upgrade vid! The red links look great on your rig and you'll gain some durability. Maybe injora will have some high clearance links soon, and maybe some metal driveshafts
Hope so!! What I like about these are the custom lengths.
ya.. anti squat/dive is far more complex due not just the geometry of the links, but takes into account sprung weight, shock mounting positions(it would be muut if there was no shocks and your rear would never squat for example), and the radius of your tires/wheels and distance from the center of the axle, plus center of gravity. i've had many a discussion and yes, absolutely, it is very controversial. this is why I like kits with lots of mounting hole options to find that best setup vs rtr
100%
Great to have some different people making links. Some guys have just got out of hand with prices.
For sure good to always have options!
cool build., I can't seem to find the stock weight in grams of the redact ascent 18? I added brass front links plus steering link. and aluminum rears also hot glued two dead AA'S on front under hood and one on each slider. added an incredible amount of stability and crawls over anything. batteries were 92 grams total.
stock truck is 393 with battery is 437. Pretty sure I did a 4 corner scale on it in my deep dive video. Def check that video out
At 30:20 ish you mention needing at m2.5 x 8 screw. I’m trying to order some of those because I need one. What style head is that particular screw called? Thanks for your help!
Usually they are button heads
Be careful with those shocks. I snapped the end off mine trying to get it off the ball
Yep, for sure. Drilling out the center will 100% help. Also wanna be sure you full support the plastic link end when twisting it off.
Hey could you add the link for the shims you used?
ooof sorry, I thought I did. I added it! Thanks for the reminder: ebay.us/nmVNTJ
He I need help my Axial scx24 lost throttle but steering and lights still work my car is stock tho
100% be sure your truck battery is fully charged. Also be sure the battery is good.
You are likely hitting the “low voltage cut off”
Yes I checked it
How much are the links for the Ascent 18?
I’d suggest reaching out to 828 rc as his prices have likely changed.
Who would buy a red cat if that’s the case? 🤦🏻♂️
huh? if whats the case? The shock mount? That's a very minor issue.
Because for the price it whoops the other 1/18 scales out the box .. I have a fully built trx4m high trail and the stock redcat beat it every time