Watched both videos. Fantastic job with the close up footage and the results are awesome. This is the look that dodge really should have had from the factory on this gen.
For anyone that bought the wrong headlights just go to a audio shop and have the lights hard wired. I bought the wrong ones and just got them hard wired in, works perfectly!
lol you really are paying attention to the video. Neighbor decided to mow his lawn during filming. Dasllamas may need to get a studio warehouse some day.
Thanks! There are 3 popular designs out there. I enjoy these and they have one compatible with the stock HID setup. This was a big selling point for me even though a friend hooked me up with these
Man i have been wanting to get these lights. I will now since they are the only ones that I could find that fit factory HID! Looks awesome and thanks for this install vid, ill be watching it many more times to prep :) and of course the HID wiring vid too!
@Shamkilla23 if you have halogen lights the color is yellowish. If you have hid the it is a clean white. You can go to the mopar website and pull up your build sheet using your vin.
Brightness is the same as stock as it reused the same bulb. The projectors give a clean light spread with a sharp cutoff at the top. The wires are open in the back so if you know what you are doing you may be able to rewire them to blink with the signal but that would have to be all custom work
Could you please explain How to Wire the DRL bar as your daytime running light. I cant get it to turn on without my headlights being on. Or when its dark outside it dosent automatically come on
You will have to do a little wiring. Get a fuse called an "add a curcuit" will run you around 5 bucks on amazon. Get the one that is for the micro fuse and use the 10 amp fuse. Go into your fuse box and find an existing circuit that powers on when you turn on the car. Use the add a circuit fuse there. The existing fuse will plug into the slot in the add a circuit unit. Use the new 10 amp fuse in the new circuit you just created. You will then have to rerun the wires in the led tubes to this circuit you created. With led it does matter which side is positive and negative so if you hook it up and it does not turn on reverse your wiring. If done correctly the led light bar will turn on and off with your car. Reach out to me on instagram if you have questions and i can send you a pic of the add a fuse thing I talked about. @dasllamas
Mike extra wiring. I bought the adda circuit plug in for the fuse box so I could wire it to turn on with the car. Sadly in direct sunlight the led bar is hard to see. I will get a video up showing how to wire it up. Couple weeks before it goes live. Still need to do the wiring myself.
So Dave, did you have any issues with the turn signals? Since in this video there was no mention of transferring the old turn signal bulb to the new housing... I installed a few hours ago and turn signal lamps appear to be dead or missing. There was no mention of turn bulb transfer in ANY videos. I have a 2011 charger se
do you know where you can buy the bulbs inside? or where you can buy the tube light? I have these headlights and the tube lights are slowly getting dimmer and one low beam light it out just cant find online what they are called and where to find them
Thinking about Getting these for my charger. Will the LED bars come on if you turn on the switch to turn on the yellow side markers so u can still kinda manually use the LED's as Day time running lights
What kind of LED bulbs fit in these? I have a set but the guys installing it said that they don’t fit and didn’t get a great answer on what kind I should get. Think you can help me out? Great video btw!
These one specifically are the setup for hid. If you were going to go led I would buy the halogen kit. You can then get led bulbs for moritomo and diode dynamics to fit
Well first I didnt know our cars would tell us if a signal was out so thats cool. But to the solution. Check the connection and make sure the plug is fully seated and the lock is set. Second check the turn signal bulb and make sure it is not burned out. Are you using the incandescent turn signal bulb or an led bulb? Are they turning on at all or are they not lighting up at all? Are they lighting up for the parking lights?
I just installed these on my 14 charger and when I tested it everything worked. Got the bumper set back up and when I started the car the led bar flickered and then went out. Drl not working only head lamps working. Can anyone help with this?
This may be a bot question, but you only used the low beams out the factory projector??? It’s a mess for me because currently my passenger side low beam is out so I was gonna upgrade, Help me out...Great vid also
dasllamas misconception on my part it’s actually an HID out and I know I’ll need the bulbs to do the projector upgrade do you recommend 6000k? Rumor is they get too hot for the projector lenses
@@dasllamas maybe you can make a video on that? Or explain briefly how i can go about doing that shops been charging 200 to do that for me and i dont think it should be that much
I really hope i can get a reply from you mr llamas. I mistakenly bought the led projector headlight type instead of the hid type. Am i still able to plug in my hid’s and ballasts to this type of headlight?
@@dasllamas for sure): excuse my language bro but FUUCCCKKK!!!!! That just upsets ne because i tried to return through car id and they wanna tell me all of a sudden i need my original boxes for them): thank you much bro.
@@dasllamas also not sure if you know the answer to this but im trying to run a staggered setup with 9 wide in the front and 10-10.5 wide in the back. Will the 10.5 fit in the back with 295 or 305 tires without rolling fenders or will that be neccessary?
They do not come with the kit. My hid are the ones that are factory on the car. White color no blue. About 5000k to 6000k color. No problems to report at this time
new subscriber, I have a question, I need to buy some ballast for a 2012 dodge charger, which must have 35 w 42 vac, what is the difference in 35w 85 vac, can you see a short or something?
If you currently have hid you need to buy the spyder headlight designed for the factory hid. Check the video description for the link to the HID install process
Hey great video. I had these lights installed on my Charger but I noticed my fog lights are now always on when I drive during the day. Did you have this happen to you? Is it normal?
So my driver side highbeam failed on my spyder headlight. No one seems to know how to fix....waiting at the garage i bought it from. Never worked from day one and I never noticed.
@@dasllamas i literally had it to my dodge dealer (savage 61 pa) we cant help you because they are after market...so i took it to 3rd party dealer and they seem reluctant to work on it too. Why? Why wont they just take my money? How am i supposed to pass inspection if no one wants to service it?
Seems im going to be doing it myself and following your video. Are these the lights with the ballasts on the sides? Maybe it went bad? Or maybe like you said its just in the harness.
@@tapastrat this video is basic install. The link in the description is to the ballast portion of the install. You said it was the high beams not working? The high beams do not go through the ballast.
@@luisitomans22 I have never modified one before so I dont know. Check through the comments here I think there have been some that accidentally bought the hid kit. See if you can trade with them
@@dasllamas well i put them plugged everything in and all the lights work. I saw your comment that said if you wanted to go with leds to get the halogen kit can i just go led then ?
Dasllamas, need your advice. I have the same car, HID headlights per dealer. I want to install 2015+ charger replica lights for the 2014. I only see LED versions, no HID versions. Is it ok to go from HID to LED in this case?
I do like led lights as long as you buy quality ones. Whether if it is ok or not that is up to you. I have not done an led kit myself so I can't offer you any how to advice.
I have a question, i am looking to buy spyder lights for my 2011 charger, is there anything i can put on them to make them green? ( Green being my favorite color)
You would have to do some custom lighting work if you wanted the led light bar to change colors. You can also look at a product called diablo eyes i think. It is an led lighting kit you wire into your headlights. Involves baking you light housing to open it and wiring knowledge. You can also buy green led H1 bulbs to put into your high beams. Won't put out much light but you get the color. Keep in mind many states green lights is reserved for military and you can be cited for displaying green while on public roads.
@@thomasyoung1685 this should be it. www.carid.com/2014-dodge-charger-headlights/spyder-drl-bar-projector-headlights-15928082.html?parentsubmodel[]=SUBMODEL|With+Factory+HID%2FXenon+Headlights
Hey! I’m thinking of ordering these headlights but I have a few quick questions if you have the time. (I have factory HID lights). I haven’t gotten a chance to watch the entire video yet. -Will I need to buy new high beams/turn signal bulbs or can I use my current ones? I read that I need to buy amber bulbs for the signals -I currently use 6000k HID lights, do I need to upgrade to LEDs to match better with these headlights? -Anything else I may need to purchase to complete the job of transferring to the new headlights? Thanks!
These are tied to the side marker running lights. Very simple to wire to run as daytime running lights with an "add a circuit" fuse. These lights are bright but in direct sunlight it is hard to see them on
@@rambosandman4088 so if your car has factory hid should be item# 15928082 more details on - www.carid.com/2014-dodge-charger-headlights/spyder-drl-bar-projector-headlights-15928082.html?parentsubmodel[]=SUBMODEL|With+Factory+HID%2FXenon+Headlights
Random RUclips Name 19 i really dig them. I am going to rewire the led lights to turn on with the car. Right now they just turn on with the side markers and i want to use them like DRL
These lights look nice but they suck. They don't last!!! My led bar on the right went out. I called Spyder about getting a replacement they said I would have to buy a whole new unit. What a waste of money.
@@dasllamas I already bought the lights and didn’t notice until I went to put them on, do they make a non hid kit that goes on the spyder lights or do I just need to get hids now?
Hid install video is here
ruclips.net/video/6YXhfQZxX4Y/видео.html
Does the blue led bulbs come with the lights how can I purchase them
Blue led are ones bruce gave me. I think they are just h1 bulbs
Watched both videos. Fantastic job with the close up footage and the results are awesome. This is the look that dodge really should have had from the factory on this gen.
CTCharger totally agree. The projector / hid option for this gen seemed like such an afterthought.
@@dasllamas I hate that options are so scarce to non existent for the factory HID models.
For anyone that bought the wrong headlights just go to a audio shop and have the lights hard wired. I bought the wrong ones and just got them hard wired in, works perfectly!
What’s the wrong headlights?
Excellent instructions - both videos. Nicely done, indeed!
Thank you
Do you need to adjust the direction where the light beams pointing to?
Looks awesome! I've always worried about taking off my front bumper - thanks for the info! (BTW, you can hear my car @ 3:42)
lol you really are paying attention to the video. Neighbor decided to mow his lawn during filming. Dasllamas may need to get a studio warehouse some day.
Those do look really cool!
Thanks man one of the best video by far!
Thank you! Means a lot
I bought the same headlights but mine didn’t come with that yellow bulb that yours had pre installed
Looks Nice!!! I have a 2013, I think these will be hot on mines also..
Thanks! There are 3 popular designs out there. I enjoy these and they have one compatible with the stock HID setup. This was a big selling point for me even though a friend hooked me up with these
I saw the low and high beams working do you have a video showing the daytime running lights and blinkers
I do not. Message me on fb or insta and I can do one for you
On the running headlight can u change colors
These are white only
Man i have been wanting to get these lights. I will now since they are the only ones that I could find that fit factory HID! Looks awesome and thanks for this install vid, ill be watching it many more times to prep :) and of course the HID wiring vid too!
Aaaand the HID vid is down lol
ANTastic Kidd ill get it up here. Give me a few minutes
should be up now.
ruclips.net/video/6YXhfQZxX4Y/видео.html
Does the bar light come on when the headlights are on?
They are tied to the running lights. I bought an add a fuse circuit to tue them to DRL. Have not installed this yet.
dasllamas do you know where to buy the add a circuits? And will you make a video on the install?
Can you add the link I bought some but not sure if mines have the halogen part on the side to fit in the seller didn’t give full information thanks
Id have to search for it but if the light housing has a large rectangular opening on the side it is for the hid. No opening then it is for halogen
@@dasllamas I’m not sure if mines have it is there a way to see if my car has it ?
@Shamkilla23 if you have halogen lights the color is yellowish. If you have hid the it is a clean white. You can go to the mopar website and pull up your build sheet using your vin.
Yeah mines are white no yellow
How bright are these compared to factory?
Also is there a way to make that LED portion the turn signal or any kits online for that?
Brightness is the same as stock as it reused the same bulb. The projectors give a clean light spread with a sharp cutoff at the top. The wires are open in the back so if you know what you are doing you may be able to rewire them to blink with the signal but that would have to be all custom work
Works for 2014 charger sxt plus? Rear wheel v6
Ues just buy the correct one depending on if you have halogen or hid lights
Could you please explain How to Wire the DRL bar as your daytime running light. I cant get it to turn on without my headlights being on. Or when its dark outside it dosent automatically come on
You will have to do a little wiring. Get a fuse called an "add a curcuit" will run you around 5 bucks on amazon. Get the one that is for the micro fuse and use the 10 amp fuse. Go into your fuse box and find an existing circuit that powers on when you turn on the car. Use the add a circuit fuse there. The existing fuse will plug into the slot in the add a circuit unit. Use the new 10 amp fuse in the new circuit you just created. You will then have to rerun the wires in the led tubes to this circuit you created. With led it does matter which side is positive and negative so if you hook it up and it does not turn on reverse your wiring. If done correctly the led light bar will turn on and off with your car.
Reach out to me on instagram if you have questions and i can send you a pic of the add a fuse thing I talked about. @dasllamas
Can I add HID if my car came with halogen?
Yes. You just have to find a aftermarket kit
Does the led bar become the drl instead of the high beams when you install this or is there extra wiring that needs to be done?
Mike extra wiring. I bought the adda circuit plug in for the fuse box so I could wire it to turn on with the car. Sadly in direct sunlight the led bar is hard to see. I will get a video up showing how to wire it up. Couple weeks before it goes live. Still need to do the wiring myself.
Are there any where the led bar is a little easier to see?
Can someone link the headlights link where to buy?
So you can’t use your own after market headlight bulbs
There are too many variables to say. Some might work some might not
So Dave, did you have any issues with the turn signals? Since in this video there was no mention of transferring the old turn signal bulb to the new housing... I installed a few hours ago and turn signal lamps appear to be dead or missing. There was no mention of turn bulb transfer in ANY videos. I have a 2011 charger se
ramon jones mine had signals in it already. If you don't have signals in it you may have to transfer them from the old housing.
Wym old housing? I didn’t have bulbs on mines either and I already installed them I was trying to figure out how to get them to turn on my signals
I installed my headlight but they are shining to low, which adjuster are used to move the light up?
Should be the one directly behind the light you are adjusting turn one direction to go up other way to go down
do you know where you can buy the bulbs inside? or where you can buy the tube light? I have these headlights and the tube lights are slowly getting dimmer and one low beam light it out just cant find online what they are called and where to find them
Spyder headlights. Can buy them from carid.com. dont think you can buy individual parts though
dasllamas damn there is no way to change the lights i side with the same ones? Without buying another headlight?
This video was a huge help thanks
Thanks for watching
Thinking about Getting these for my charger. Will the LED bars come on if you turn on the switch to turn on the yellow side markers so u can still kinda manually use the LED's as Day time running lights
They are tied in with the yellow side markers so you can manually turn them on.
Are the headlights still functional to this day ?
Yes they are. The car is with a new owner but the lights are still working. No issues
Those are sweet, I want them for my charger
Alan's RT I wanted them for forever. Very happy with them.
Do the DRL work with the switch on auto? I saw a review on Amazon that said they DRL don't work on auto.
They do not. You can rewire it if you have a little knowledge of wiring, they are all easy to access.
My turning signals aren’t working I wired everything and plugged in the light I was supposed to?
Are you using led turn signal bulbs? If so check the polarity of your wires. If they are backwards the led will not work.
For some reason the tube lights flicker a few times then turn off completely when engine is turned on how do i fix that?
Id check with Spyder. First I would double check the wires making sure they are secure
Do you know where I can find the side marker bulb. Like the whole component my head light was broken by a deer and was completely shattered.
Dealership will be easiest. Scrap yard will be cheapest.
@@dasllamas thanks. Will definitely do.
What bulbs do u use because mine came with the stock yellow looking lights
Mine are factory HID
What kind of LED bulbs fit in these? I have a set but the guys installing it said that they don’t fit and didn’t get a great answer on what kind I should get. Think you can help me out? Great video btw!
These one specifically are the setup for hid. If you were going to go led I would buy the halogen kit. You can then get led bulbs for moritomo and diode dynamics to fit
I want to know where you can get those sypder lights for that car I want to buy a pair?
Last I saw you can get them from car id
Fit on charger srt8 ?
@@alexmartinez-gf8jm yes
Does it use the same bulbs it normally would ?or do you have to get diffrent sizes or something
Used some bulbs. Just order the correct kit for your car HID or halogen
So I just completed this job and It’s saying my front turn signal lights are out, any help with that
Well first I didnt know our cars would tell us if a signal was out so thats cool. But to the solution. Check the connection and make sure the plug is fully seated and the lock is set. Second check the turn signal bulb and make sure it is not burned out. Are you using the incandescent turn signal bulb or an led bulb? Are they turning on at all or are they not lighting up at all? Are they lighting up for the parking lights?
@dasllamas so when you drive at night do you use the high beams
I do not use high beams. Between these lights and the xsprite fig lights there is plenty of light.
I just watched your wiring hid video and seen what I was missing and it was the hid control /housing piece on the side
Where you get the HID ballast from
Can I do this to a 2013 Dodge Charger SE? If so, what part number for the headlights do I need? Thanks.
Yes you can. Check carid and get the lighting kit for halogen lights. Dont have the part number on me
Your car is so freaking clean!!!! 😱🤩
Hah thanks! Video hides a lot of imperfections 😉
I really like them. Especially at night. Well done like #20
I just installed these on my 14 charger and when I tested it everything worked. Got the bumper set back up and when I started the car the led bar flickered and then went out. Drl not working only head lamps working. Can anyone help with this?
Check connections. Make sure you didnt pinch a wire
Having the same problem
When I start driving they will flicker for a little bit then go off
Must be a charger problem because I drive a 2012 charger
@@MCBryceFace car id has sent me 3 replacements and none work, techs don’t know what the issue is and car id won’t refund me lol
This may be a bot question, but you only used the low beams out the factory projector??? It’s a mess for me because currently my passenger side low beam is out so I was gonna upgrade, Help me out...Great vid also
Low beams out of the factory projector is correct. If yours is not working you need to check the bulb and ballast.
dasllamas misconception on my part it’s actually an HID out and I know I’ll need the bulbs to do the projector upgrade do you recommend 6000k? Rumor is they get too hot for the projector lenses
@@MasSmokes i believe factory is around 5000. Have not heard issues of 6k being too hot. Some run as high as 9000
What size are the bolts on the headlight bracket ?
To remove the light housing? Can use either 8mm or I think it was a t20 bit
13:26 did you crack the headlight?
Are you talking about the vertical line? Not cracked. Its a line in the lense part of the design.
Wish the tube could be used as daytime running lights
It can. You just need to do some minor rewiring but although the tubes are bright at night they are barely seen in daylight
@@dasllamas maybe you can make a video on that? Or explain briefly how i can go about doing that shops been charging 200 to do that for me and i dont think it should be that much
I really hope i can get a reply from you mr llamas. I mistakenly bought the led projector headlight type instead of the hid type. Am i still able to plug in my hid’s and ballasts to this type of headlight?
Unfortunately you have to return yours and buy the correct one
@@dasllamas for sure): excuse my language bro but FUUCCCKKK!!!!! That just upsets ne because i tried to return through car id and they wanna tell me all of a sudden i need my original boxes for them): thank you much bro.
@@FatboySips damn. I hate the pita style returns from some online retailers
@@dasllamas also not sure if you know the answer to this but im trying to run a staggered setup with 9 wide in the front and 10-10.5 wide in the back. Will the 10.5 fit in the back with 295 or 305 tires without rolling fenders or will that be neccessary?
Do the HID lights come with the kit, or do you have to perchance them separately. Also does it have a blue tint to it. How long do they last.
They do not come with the kit. My hid are the ones that are factory on the car. White color no blue. About 5000k to 6000k color. No problems to report at this time
Very well put together vid take my like
new subscriber, I have a question, I need to buy some ballast for a 2012 dodge charger, which must have 35 w 42 vac, what is the difference in 35w 85 vac, can you see a short or something?
Thanks for the sub but unfortunately this question is beyond my comfort zone and I would hate to give you bad information.
What color are they back or Crome
Black
What’s the link to where you bought this headlights? I’ve been looking for this type
Try carid.com
Did you have any issues with the LED flickering on and off? I’m debating if I want to buy another set when they refund me.
I have not had any issues and I got mine second hand so they have been well loved
Can I change over the HID ballast on the zmautoparts spyder replica headlights?
If you currently have hid you need to buy the spyder headlight designed for the factory hid. Check the video description for the link to the HID install process
Great video Dave! Where can I get these headlights though?
I found a website but you can find them in amazon
Hey great video. I had these lights installed on my Charger but I noticed my fog lights are now always on when I drive during the day. Did you have this happen to you? Is it normal?
Nope. My fogs work independant from the headlights. The wiring harness is different from the fogs and headlights
So my driver side highbeam failed on my spyder headlight. No one seems to know how to fix....waiting at the garage i bought it from. Never worked from day one and I never noticed.
Well that is just crappy. Shouldnt be too hard to troubleshoot. Its likely the connection point.
@@dasllamas i literally had it to my dodge dealer (savage 61 pa) we cant help you because they are after market...so i took it to 3rd party dealer and they seem reluctant to work on it too. Why? Why wont they just take my money? How am i supposed to pass inspection if no one wants to service it?
Seems im going to be doing it myself and following your video. Are these the lights with the ballasts on the sides? Maybe it went bad? Or maybe like you said its just in the harness.
@@tapastrat this video is basic install. The link in the description is to the ballast portion of the install. You said it was the high beams not working? The high beams do not go through the ballast.
@@tapastrat not to sound crazy but did you check to see if the bulb is burned out? The high beam is an H1 bulb
Where did you order the headlights from
You can get them from carid.com
How does the turn signal work with these?
The yellow side marker on the outside edge flashes. Kinda wish the led tube flashed yellow but no such luck
dasllamas just realized mine doesn’t have the bulb in it. Gotta take everything apart again tomorrow
@@gbull32 should be able to reach in and pop it out without having to take it all apart. If you have small hands it will be helpful
Hey man i ordered the headlights for 2011 rt and i got them for the halogen models. Is there anything i can do i barely noticed today
If you have hid you need to return the halogen lights and get their hid set. I think they call them xenon or something like that
@@dasllamas thats the thing i cant return them anymore. Is there any way i can work around it or any conversion kits ?
@@luisitomans22 I have never modified one before so I dont know. Check through the comments here I think there have been some that accidentally bought the hid kit. See if you can trade with them
@@dasllamas well i put them plugged everything in and all the lights work. I saw your comment that said if you wanted to go with leds to get the halogen kit can i just go led then ?
Were those the halogen model ?
These are the HID model
Dasllamas, need your advice. I have the same car, HID headlights per dealer. I want to install 2015+ charger replica lights for the 2014. I only see LED versions, no HID versions. Is it ok to go from HID to LED in this case?
I do like led lights as long as you buy quality ones. Whether if it is ok or not that is up to you. I have not done an led kit myself so I can't offer you any how to advice.
I have a question, i am looking to buy spyder lights for my 2011 charger, is there anything i can put on them to make them green? ( Green being my favorite color)
You would have to do some custom lighting work if you wanted the led light bar to change colors. You can also look at a product called diablo eyes i think. It is an led lighting kit you wire into your headlights. Involves baking you light housing to open it and wiring knowledge. You can also buy green led H1 bulbs to put into your high beams. Won't put out much light but you get the color.
Keep in mind many states green lights is reserved for military and you can be cited for displaying green while on public roads.
Keep your calendar clear for spring or fall 2020 that will be when the all new We are mopar is! (they will have a new name also)
Could you link me to the set you bought I can seem to find them
Do you need the hid xenon set or the halogen set?
@@dasllamas my car currently came with the HIV set so I think I need the xenon set but I don't know my car has the same setup as yours
@@thomasyoung1685 if it came with factory hid you need the spyder xenon kit let me see if I can find the link
@@thomasyoung1685 this should be it. www.carid.com/2014-dodge-charger-headlights/spyder-drl-bar-projector-headlights-15928082.html?parentsubmodel[]=SUBMODEL|With+Factory+HID%2FXenon+Headlights
@@dasllamas thanks man and great follow along video this helped me big time.
Seeing this late 😂 I have those same lights!
Hey! I’m thinking of ordering these headlights but I have a few quick questions if you have the time. (I have factory HID lights). I haven’t gotten a chance to watch the entire video yet.
-Will I need to buy new high beams/turn signal bulbs or can I use my current ones? I read that I need to buy amber bulbs for the signals
-I currently use 6000k HID lights, do I need to upgrade to LEDs to match better with these headlights?
-Anything else I may need to purchase to complete the job of transferring to the new headlights?
Thanks!
It is plug and play with factory hid. Check the description for the link to the HID wiring instructions.
dasllamas It looked like yours came with an amber bulb already installed? Or was that taken from your stock setup
@@Vegz0rz from stock setup
dasllamas Right on, thanks for the replies!
Does anybody know the name of the red part that has his RUclips channel name at 1:14 ??
The red part itself? Radiator mount is what I've always called it. I'm sure there is a proper name for it
dasllamas where did u get it ? I need one for my 2014 charger and I can’t seem to find it
dasllamas by the way yes the red part itself
@@zettaiv2695 it is the radiator mount that is under the plastic piece that snaps on right there. Yours will be whatever color your car is
dasllamas do you know where I can find one ? I’m missing it
Where can purchase those headlights from?
Carid, amazon places like that
@@dasllamas thanks!
How do you adjust these
There should be 2 adjustment studs on the back of the headlight. One adjusts up and down other left and right.
8mm studs. 2 for low beams and 2 for high beam.
Where can I purchased them ?
Several places. Just google search charger 11-14 spyder lights
does these lights stay on in day time?
These are tied to the side marker running lights. Very simple to wire to run as daytime running lights with an "add a circuit" fuse. These lights are bright but in direct sunlight it is hard to see them on
Bro my blinkers not working on my headlights
Need a bulb
Really well done. Thanks!!
Thank you!
Where can i get the lights
Just google it. They are on amazon and carid
@@dasllamas thank you bud
Nice looking lights! Great install video
do you know the part number?
Do you need halogen or hid?
@@dasllamas the one u got
@@rambosandman4088 so if your car has factory hid should be item# 15928082 more details on - www.carid.com/2014-dodge-charger-headlights/spyder-drl-bar-projector-headlights-15928082.html?parentsubmodel[]=SUBMODEL|With+Factory+HID%2FXenon+Headlights
Looks great
If my car fixable ima get a srt8 body
Nice lights bro
Random RUclips Name 19 i really dig them. I am going to rewire the led lights to turn on with the car. Right now they just turn on with the side markers and i want to use them like DRL
Nice hey you live in colorado
Cause if so maybe we can meet up
dasllamas are you talking about the white U-bar lights? They don't act as DRLs when first installed?
100th Like 💪🏽
Hell yes thank you!
When I did mine I broke my fog light wire lol
Whoa Weezy bummer ripped it off with the bumper?
dasllamas yeah lol but we rewired it
Whoa Weezy lol. Savvy
SRT BRO
MOPAR ARTS R/T i want the srt front end
dasllamas looks good man
If anyone has a spare passenger side spyder headlight ....hmu
Check some of the facebook groups. There is a charger 11-14 group that might be able to help. People get in accidents and part out their cars
These lights look nice but they suck. They don't last!!! My led bar on the right went out. I called Spyder about getting a replacement they said I would have to buy a whole new unit. What a waste of money.
Damn that sucks. I got my set used and 2 years later they still work fine
So if the car didn’t come stock with hid’s what do you do about the huge hole in the headlight
You buy the non hid kit. It wont have the hole
@@dasllamas I already bought the lights and didn’t notice until I went to put them on, do they make a non hid kit that goes on the spyder lights or do I just need to get hids now?
@@jesseLeipold gotta return them and exchange them or upgrade to hid
@@jesseLeipold i have halogen ones if you wanna trade i need hids