S2000 cluster in my ek
HTML-код
- Опубликовано: 21 авг 2024
- Ill teach anyone how to do it.. to get the temp gauge to work use the s2000 temp sensor with a resistor.. for the speedo.. just buy the analog to digital sensor on ebay I found them for less than 20 bucks.. search it.. speed healer just cost too much $$$$$
![[TF2] The Russian Bear Trap](http://i.ytimg.com/vi/YFNSwz2_rOA/mqdefault.jpg)
I didn't buy anything.. Wiring was simple.. My gf actually did it using the wiring diagram for my car and the one for the s2000. It was very easy.. To get everything to work I used the items I mentioned below... Total cost for all parts used was about 45 bucks.
Mark Villanueva Mark Villanueva think you can help me?? If you still remember. Need to know how to make temp and speed work everything else is fine
nice i did mine yesterday! for the temp i used the ect module from modifry. Link to the howto i used is in the discription.(Dutch) pinouts etc..
I used a resistor for the temp gauge and I used a 10 dollar analog to digital converter from eBay for the speedometer to work..
Hi I was wondering, what resistance value does the resistor have for the temperature gauge?
Also, do you have a link to the analog to digital speedo converter you used? Thank you
It's on eBay... Search for analog to digital converter
Mark Villanueva how can i do that to a 98 honda civic.that shxt looks so good.
Ok for the speed to work you need a analog to digital converter found on eBay.. If not you can RUclips how to make one.. I honestly forgot what size resistance I used.. I think it was 1k ohm
hi, link ?
would you be able to make a video on how to do this that would be awsome
question. HOW did you mount it in the dash?!?
Love This. Jealous, any tips on how to find a bloody s2k cluster?
great vid.. car looks clean af
That's hella clean but now upgrade ur steering wheel to a good brand like nrg or nardi and it will make it look cleaner
For the temp sensor did you simply add a resistor between the pigtail on cluster and temp output wire ? You used a 1K Ohlm?
Now you can rev it up to 9000
very clean isht... very impressive.
That's clean! I got a ek but i haven't started doing shit to it yet.. It's the D16 but it'll have to do for now my budget is non existent lol
The cluster was the most expensive thing.. the rest was under 40 bucks.
Ayus to sir pwede mag pa turo hehehehehe
If anyone is wondering about doing this swap in your 1996-2000 honda civic ex the ek conversion kit is compatible with your ex I just spoke with wire-worx and they have confirmed it. Hope this helps someone out.
Hey what exactly is the conversion harness kit for??
For wiring up the s2000 instrument cluster to a regular honda civic making it all digital
Jeremy Beaver but do you need it to do it
You have to have the kit yes.
clean ek
I really like to buy it because I really din't know alot about this but I want it to have in the car since already buy the cluster will you mind finding out the exactly parts I need because the play and play are too much and I really not wanting to spend all that
Hi b18b can you also contact me in regards on how to do this? That speedo healer was way too much and is the only reason I don't have a s2k cluster in my ek right now
pretty cool. Why can't accords have that kinda of speedo
Can u please explain more about wiring up the coolant temp sensor?
What resistor, what pin to wire to etc.
Thanks
clean as f. plan on doing that to mine
looks sick!! please send me the wiring diagram
i want to do this for my cb7 91
Where can I get the cluster and parts needed to do this to my ek?
thats awesome b18vtec! i wanna do that to my 00 si. mind showing me how?
let try other way to get on touch!! is there some way for you to remove it and show us how to do it more detail
how the analog to digital have to look like I have check at eBay and it doesn't show anything that can conect to that
Is it possible to do this in a 1993 Honda accord LX? I have been looking for information on how to do it for my car but can't seem to find anything for the CB7's. Any help would be appreciated
Upload a how to video buddy
Hey foo where's my wiring diagram
have a 97 acura integra i want to put this in were do i get the carbon fiber shroud ? thanks
hey Mr Mark do you think you can send me the exactly inf about doing this I'm doing it to my del sol please help I don't want to spend the wireworx jiji
or anybody have got mark instruction please email me,...tq to all my friend in here :)
help with this thing is the sensor from the s2000 (temperature) fit on the del sol or Integra?
How much did it cost you for the conversion kit??
Was up bro I’m looking for a s2000 eg cluster but I can’t find it where you guys look for it
Either junk yards or just people parting out their cluster.
patulong po sir pano toh kabit may Ap1 gauge na po ako hindi ko alam kung san makakabili ng analog to digital converter dito sa pinas saka reaistor
Hello there guys!!! I have a honda del sol and I'm trying to install this can you please send me the info of what I need please
Go on eBay and get a analog to digital converter or make one.. Plug it in to the speed sensor wire to the cluster
can i do this in a integra
A friend of mines have this cluster gauge in his DC5 Type-R so i mean it must can work in any honda starting from the civic
Can you please help me how to do this
more info on this?
Is that an easy swap?
how big of a resistor do you use
sir can u help me with installing this to my SiR.. ru pinoy po sir?
Where did you get the carbon fiber bezel????
TheRealKnob I actually made it.. I cut the original out of cardboard then made a replica out of plastic and put carbon fiber tape on it.
Mark Villanueva how did you go about recreating the stencil with plastic? Where did you get the materials?
How do i do this i have my ap1 cluster just wanna know exactly what to get and how to install
First you need to get a cluster with the clips on the back, if you don't have the clips it's fine.. I didn't have them either.. on your car it's pretty much cut and splice.. what are you having a problem with?
Mark Villanueva thanks for the reply i plugged mine in already i just wanna know how to make the speed and temp work
Mark Villanueva and the gas :p
You need to get a analog to digital converter, like the ones they use on motorcycles.. they're on eBay for like 10-40 bucks.. email me tomorrow I'll help.
Mark Villanueva what else other than the converter ? And whats ur email?
is this hard to do??
@SGVxHANDLE whats your email??? ill explain everything so u save money
Mark Villanueva help me too please. Are you still available to? I know it was a few years ago
Gett Loww what's your email?
Mark Villanueva yo i need help man do u think i can get a write up on it ???
Email is jimenezangel123rtk@gmail.com
Hey can you help me on this too please @Mark Villanueva
hey man, could you help me too? I want to convert my hatchback. my email is kokeperrito@yahoo.com thanks
do you have facebook account,... more easy to communicate on fb
Thanks for the reply b18b :) check your inbox I sent you my email.
Mugetsu_Si did you ever get the info bro i need to install mine :p
my fb fauzi bai
Hey wuss up bro text me
Bullshit...
How is it bullshit it's called engineering, you think you can't break down electric voltages/current down in order for another transistor or programmable chip to read?
S2k cluster......bootleg steering wheel...get an s2K WHEEL
Easier said than done. $500 for an ap1 steering wheel and it's not even in good condition. Then you have to get it wrapped.
Ayus to sir pwede mag pa turo hehehehehe