ISEO R6 Plus - ‘Plus’ a Terrible Gutting More Like…
HTML-код
- Опубликовано: 8 сен 2024
- Please watch this video before trying to gut this yourself. It’s a miracle I managed to rescue this one!
Remember: only pick locks that are yours and that are not in use! Keep locksport legal!
Contact me at: locknoobcontact@gmail.com
Support my channel! T-shirts and merch:
teespring.com/...
Lock Noob lock holder for 3D printers:
www.thingivers...
Lock Noob pinning tray for 3D printers:
www.thingivers...
#locksport #lockpicking #locksmith #pentest #hacker
Good save, dude! That first side looked a nightmare.
Mate. The worst
I bricked the same Lock exactly the same way :)
I then started to disassemble the other side of the lock and was not careful enough. I put in the key and didnt turn it right away. the Cylinder slipped out one pin position and was stuck in place.
I tried hammering the lock with a rubber mallet to make the driver pins jump and simultaniously push or turn the key, but i couldn't get it to budge. so, both sides bricked. Learned a lot :)
I have never seen that before with a keyway so wide, don't think anyone would have done anything any different if they were in your shoes. Interesting idea on the ball bearing for the blocking of the construction key, shame it doesn't make picking harder , I like the idea of a harder to pick R6.
Without wanting to sound like a smug-git, I always slide my pinning shoe in at around 4/5 before turning it into position. - That said, that's quite a gape going on there on this R6 Plus, wasn't expecting that to happen... Noob got it sorted so no harm done anyway 👍
It’s so wide lol
Well done pulling that back . Really interesting video. Just goes to show how careful you have to be, and how important it is to research a lock you're not sure about. Thanks for sharing and have a great weekend 👍🙏😁
You too!
Looking forward to a nice long Side Noob video as you try to wrestle those pins out. Nice to see that, even for a very experienced picker, things sometimes go sideways (literally in this case).
I wish I’d recorded it tbh. But it was a long and very painful process
Great picking and such a shame with the gutting. Good to see you recovered it though. Sometimes locks have an anomaly which can cause a disaster and it's an horrible feeling too.
Awesome video all round.
Cheers Roy!
Well saved there Ash mate great video 👍🇬🇧😊😎👊
Thanks!
Nicely picked, and a great recovery, that was very unexpected. I've never seen driver pins shoot up into a plug like that, interesting.
Interesting AND annoying lol
Glad that you managed to rescue the lock.
Me too!
That is a really interesting lock. It really blows my mind how people think of some of these designs. Very cool.
Agreed!
Excellent video as always 👌. Thanks again for sharing this information. God bless 🙏
Thanks!
Well, someone had a... gutful. ;-)
Lol
how funny. I did exactly the same with the R6 6 months ago.
Hmm. I thought iSEO locks normally have steel pins. Weird this one has brass pins. Did you have to make a special tool to rescue those pins that dropped into the bottom of the cylinder when you rotated it?
I just used a lot of shaking and a probe made from a broken pick. It was very tricky
Great save!😀🐈⬛🐾🐈🇬🇧🍻
A lucky save!
Still don't see the point in the constitution key idea. I would just change the cylinder as it takes literally five minutes and is simple to do.
A good cylinder can cost over £50 ($63 ish), sometimes more
Great, that you could rescue the lock. I got a question, because in a holiday apartment, what I bought, there is this ISEO R6 PLUS installed (currently with construction key) and I will move in 6 weeks from now. I have bought a NUKI smart lock and there I need the lock to be able use both sides to insert the key at the same time to have my NUKI working. Can you tell, if this ISEO R6 plus is capable and I can use my NUKI smart lock? Thx for your help in advance!
Quick question, and this might be a dumb question, but do locks always (or most of the time) turn the same way? If not, is the any good 'rule of thumb' to know which way you should put tension on it?
Padlocks mostly only turn clockwise by tradition, door locks can usually be configured to work either way depending on which side of a door they are mounted
Great job Ash and thanks for sharing. Take care and have fun!
You too Gazz
What book you used in the first video of your playlist(Tutorials)
What book you refer for lock picking
Maybe keys to the kingdom?