How to check 6 pin HP Power Supply, ATX 6-pin

In this video is shown how to check 6 pin connector of the HP PC Power Supply. I go line by line to check voltage.
In my example I use: HP DPC-320NB-1 A 320W 8200 ELITE 12VDC
But shall work also with other types.
ATX 6-pin Motherboard Power Connector Pinout:
Yellow: mainboard 12 V
Yelow: CPU 12 V
Blue: -12 V
Purple: 12 V Standby
Black is GND
Green - powerON

[@nikolaidisharalambos6396]

Ευχαριστώ Αδερφε μου για το βίντεο! Με βοηθησες να καταλαβω αν ειναι προβληματικο το ανταλλακτικό τροφοδοτικο για να το επιστρέψω πισω στο πωλητη! Να εισαι καλα! Χαιρετησματα απο Ελλαδα! 💜🙌

[@vkrm0022]

THANKS FOR THIS VIDEO

[@marjon1703]

Opened mine up and All Black (neutral 0Volt) connected together, All Yellow (12V main) connected, All Brown (12V CPU) connected. Yellow and Brown connected to same internal 12V feed but via different internal fuses. Purple wire is 12V. Blue is -12V, White and White are fan speed sense. Green is PSU on (when pulled to Neutral) , Grey is Power OK.

[@rmanzanog1]

Thanks.

[@brunonikodemski2420]

This is one the few videos which shows the Elite series voltages. How do you tell if the 3.3v is OK on the MOBO?

[@SANSKRITCHARAIBETI]

This power supply is on my HP computer. After Shut Down, its fan is rotating very loudly. What is the reason for this? Please tell me sir...plz

[@YoHyp3r]

Hi, I have a HP DPS-500AB-36 A and I'm currently having problems with my computer turning on but no display and fans spin very fast. I plugged in the power supply with no cables connected to the motherboard and the psu turned on with the fans spinning. Is this supposed to happen? Cuz I didn't connect the p2 cable to the p1 like you did. I measured the cables with the multi meter and the p1 and p3 measured 12V correctly. I don't know what is the problem.

[@shoaibkhasin5723]

Thank you so much

[@batterynerd8779]

You can also connect green to any orher black cable

[@buharinasrin4345]

Both of I check coming 1 only what want to check next

[@billrussells2521]

The purple line gave 11Volts is that ok?

[@JuanLopez-vf3mo]

Yes 👍🏼

[@Moepedi]

If my PSU passes like this does this mean it is ok?

[@MAHMD77]

Is it will run if I put the grin wire on p2 with the black wire on the p3?

[@discolapy]

Hi, I thin it will work. But I am sorry, I can not try as I dont have the PS any more:-(

[@elorocu2]

Bro the blue line is 0 ? What is the problem

[@mdkironkhan-rf1ul]

ব্যান্ড পাওয়ার সাপ্লাই যদি মেরামত করা যায় তাহলে আপনার হোয়াটসঅ্যাপ নাম্বারটা দেন

[@tallal321]

No Focus nothing, barely understandable video.