Hangkai Outboard Motor Long Time Review

Testing top speed on my Hangkai 4hp 4-stroke outboard motor. I adjusted the motor tilt angle, installed new NGK spark plug, new aluminium propeller and a DIY exhaust muffler/pipe.
Is this motor worth buying? Absolutely, but it is not a 4hp motor, it is more like 2hp.
Important! never let the motor lie down filled with oil and gasoline, oil will leak into the cylinder! not a big problem as you can see in the video but still a bit annoying. Same with gasoline, if you fill it up full it will leak out if the motor isn't in upright position.
If you bought this motor do not trust the manual that comes with it, not only is it in poor english its also full of errors. Learn how to properly maintain your China made outboard motor. This motor is a Honda GXV50 clone, get the manual here for free www.manualslib...
If you like what I do here and want to support the channel click that subscribe button.

[@niteshades_promise]

Awesome videos. This looks perfect for my 10' inflatable. Yeah no more row row row the boat, at least not on the open river. Save the rowing for the rapids.😂🍻

[@GurrasGarage]

Cheers 👍

[@Viper6-MotoVlogger]

What? You have no snow! I just got back home from Arizona and woke up to 25 centimetres of snow. It’s really not bad for a budget motor. Be safe my friend.

[@GurrasGarage]

Cheers buddy! Spring has sprung here, no more of that white stuff for at least 9-10 months 😃

[@daveb3910]

I have one, mine came with a cracked flywheel key, so the timing was crazy and backfired. If you're backfires check your flywheel and the key slot for a crack. I had to machine it with a band because I couldn't find the part. Works like a champ now though

[@GurrasGarage]

👍

[@MrjackieG]

Its like a lawn mower. You can only leave it on the muffler side. Otherwise oil leaks into the carb. Newer version has aluminium prop & exhaust exits side of muffler not the top.

[@cangkuk_vlog]

I have this outboard to and it run pretty good on inflatable boat😁 its been 6 month now and its still easy to use it

[@GurrasGarage]

👍

[@Apollux]

Good and informative!
At 02:15 you said it isn't truly 4.0 HP but 2.0 HP motor. Care to elaborate on that? I'm considering getting one of these.

[@GurrasGarage]

Thanks, this motor is a Honda GXV50 clone that have 2.1hp, the motor is only 50cc so no surprise 😆 but hp doesn't matter the motor is great for the price imo.

[@rainerneumeister5239]

Yes it's a 50 cc. Roughly 2 HP.

[@GurrasGarage]

Thats what I said

[@jbreefer148]

I have this motor too and even though it is a good small outboard motor I do not like the noise of that lawnmower engine. I am getting the 6 hp or the 12 hangkai outboard for more speed and less noise. Thanks

[@GurrasGarage]

Yes it is a bit noisy, good luck with the 6 or 12 👍

[@remembernormal4805]

Hi, I enjoyed your video. I have the same engine, I can't find the oil drain plug! Are you just supposed to turn the motor upside down to get the old oil out?

[@GurrasGarage]

It is the allen key bolt under the gas tank.

[@thevernonposse]

Perfect speed for trolling

[@thecoopers7803]

Thanks for the thorough updates. Can you tell what is a current link to purchase the Hangkai one? Thanks @GurrasGarage

[@GurrasGarage]

Sorry, it was a long time ago so that link doesn't work now, but google Hangkai 4hp 4-stroke outboard motor and you will likely find one. try Amazon!

[@rainerneumeister5239]

Would you recommend buying one over all. Has it any real power or kind of weak. ?

[@GurrasGarage]

I recommend it for a smaller boat like mine, watch my playlist on this motor

[@alalbatross6549]

How about running exhaust pipe into water? Most outboard motors have that and they are less noisy.

[@GurrasGarage]

Yes it would be very quit since it wouldn't run, it would choke to death

[@Ruslan_Flash]

Awesome video bro 👍👍👍

[@GurrasGarage]

Thanks bro !

[@davidjoeseph2646]

Notice any difference between a 2 blade 3 blade or 4 blade prop?

[@GurrasGarage]

I have never tested it

[@italy5153]

Lovely💙

[@jerworth3118]

I've discovered a problem with these. The carb they use is undersized for starters. It has a 12 mm bore I think. More importantly I discovered that they don't utilize crank case pressure to actuate the fuel pump. Instead that port is open to the engine side of carb bore itself. It will of course see some pressure pulses, but not nearly enough relative to what it would get from the crank case. Also, seems to me at least, that at WOT the rotovalve will be completely open resulting in even less of a pulse exactly when you need it most. I do not see any practical way of engineering a solution to this. Every single replacement carb that I can find has a port on the engine side that should go to crank pulse. The engine on these Hangkai motors has no port there. Also they use a combination of mounting plates/risers so that, in my opinion, makes it even more difficult. These motors do have a crank vent tube that goes to the breather. I've been rolling around the possibility of somehow tapping into that in order to use a better carb. So far I don't have a solution.

[@GurrasGarage]

Ok, fine but does any of this matter. It is still a 50cc 4 stroke 2hp motor. You can not expect it to run better or faster than this. I get 5 knots on a boat that weigh 200kg total.

[@jerworth3118]

@@GurrasGarage Of course it matters, especially the latter point. It simply cannot function properly with it's design and it should have been simple to make a better design.

[@GurrasGarage]

@@jerworth3118 Its a Honda GXV50 clone, have the exact same performance, have Honda done a bad design too ? www.manualslib.com/manual/904869/Honda-Gxv50.html

[@jerworth3118]

@@GurrasGarage there are some differences. The Honda carb will not work on this motor. In fact I don't think it's possible to get a replacement carb for it. I've scoured the internet searching for one. Even those listed on Amazon and eBay for the motor don't actually work. I can show you pictures of the difference if your want. It also means the integrated fuel pump is weak at best and prone to fuel starvation.

[@GurrasGarage]

@@jerworth3118 Dont bother, not interested. Its a $250 motor that runs perfectly fine, as I showed in several videos. If you want a faster motor go up in hp and price.

[@blackwoei7486]

What engine oil and gear oil best for this motor ?

[@GurrasGarage]

Watch my video here ruclips.net/video/bp4GM6o9kfQ/видео.html

[@mechengineer4894]

Another guy who had one of these stated it performed like his 2hp Honda outboard.

[@GurrasGarage]

If you read the description thats exactly what I say :)

[@markbrown7449]

People say these are crap engines, so what.. It's like a small lawn mower engine. 2 hp is plenty if it gets you where you're going and bring ya back. Briggs & Stratton used to make an engine like this, and it was some kinda loud ! Some say this engine won't last more than 2 years, but who cares..

[@GurrasGarage]

Mine is 4 years now and works fine 👍

[@02bigkev]

Row, Row, row your boat gently down the stream....lol

[@GurrasGarage]

I dont know why that song popped up in my head, its not swedish but I didnt think anyone would watch the video to the end anyways 😆

[@YoshitheShiba2019]

🤟😁

[@yeslawrence]

Did u make the length of the video 4:20 on purpose 🚬 lol here are some fish 4 u 🎣 🐟 🍣

[@GurrasGarage]

😁👍

[@kennyborek.satsopcityboy..1090]

Probably just me . To loud ...

[@GurrasGarage]

You get used to it ;)