would this work on the 500 models where its the same engine ? my buddy is currently building a mudbike out of a 2023 prohd 500(28 wides all around now stock clutch) ( they share the same 648cc engine just diff cam and tune) super hard finding parts or any info on the gen3 models ... im building a 2023 850 so its considereably easier as far as aftermarket support goes..but also wondering about clutching on the gen3 even a kit that would work maybe from the snowmobile world im not sure ? .. also for your 700xmr if you swap to defender 700 internal gears in the little gear box .. you can get a pretty decent (4 %) gear reduction without fucking with the clutch ( combo of the 2 would be best) thanks man , loving your build ..i wanted to do the same but the 700xmr in my area were more or less impossible to buy !
So yes, the exhaust will work on 500 models and no there is not a clutch kit yet but S3 Powersports has a 2 inch stretch forward and reverse high clearance arms with a 1 inch built-in lift for the gen 3s so they can clear up to a with 34 inch tire, but with the defender gear reduction as long as you keep it in low in thick stuff it will be fine, i'm pretty sure mud puppy is running 33s with the defender mod just fine. I will know how hard mud puppy is on his stuff lol
It sounds like a stock exhaust that has a rust hole in it. I don’t understand why people want to do this? Not to mention many public riding areas will fine you for a modified exhaust.
Lol i was thinkin weedeater personally but ya even the canam 1000’s sounds kinda off to me my 23 max limited stock sounds okay can’t imagine droppin another 500-1000$ for a muffler sound augmentation to each their own tho
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
not bad at all for a 1cyl! pretty impressive
It sounds great you could hear you driving from like a half mile away today
Is it me does it sound like a 420 rancher with an hmf
it does but it sounds more like a polaris 570 with hmf
sounds just like my 420 with the hmf i had 😂
Did you reflash or use a fuel controller?
would this work on the 500 models where its the same engine ? my buddy is currently building a mudbike out of a 2023 prohd 500(28 wides all around now stock clutch) ( they share the same 648cc engine just diff cam and tune) super hard finding parts or any info on the gen3 models ... im building a 2023 850 so its considereably easier as far as aftermarket support goes..but also wondering about clutching on the gen3 even a kit that would work maybe from the snowmobile world im not sure ? .. also for your 700xmr if you swap to defender 700 internal gears in the little gear box .. you can get a pretty decent (4 %) gear reduction without fucking with the clutch ( combo of the 2 would be best) thanks man , loving your build ..i wanted to do the same but the 700xmr in my area were more or less impossible to buy !
So yes, the exhaust will work on 500 models and no there is not a clutch kit yet but S3 Powersports has a 2 inch stretch forward and reverse high clearance arms with a 1 inch built-in lift for the gen 3s so they can clear up to a with 34 inch tire, but with the defender gear reduction as long as you keep it in low in thick stuff it will be fine, i'm pretty sure mud puppy is running 33s with the defender mod just fine. I will know how hard mud puppy is on his stuff lol
We’re did you find 2” lift I’m trynna find floor boards snorkel riser but I can’t find anything for the 700 XMR
Did you notice any increase of power
Where’d you find this? It’s hard to find anything for my 700
It’s from empire industries
Empire industries
What size are those wheels and tires? Offset?
What exhaust do you order can you show me the one that you ordered
Sounds way better than stock bro! Like your tires too. What’s the diameter of your rims?
His are 18
Nice bike but check out the GTR, sheeshh
Thank you!!!
How has it been running with out been tuned or reflash ? Nice ride
It idles real bad, but other than that it’s pretty good
@@jajoutdoors when you say ideals bad what u mean ? Sounds like is going to cut off or something ? How is it on fuel bad ?
Did you tested in water
Are you going to put a dynojet tune on it?
No one has a tune out for it yet!
With the exhaust do you think it needs a tune or anything? Thinking about buying one myself
It does need a tune
Did you fill any increase of power
You won’t feel any power increase with just a slip on exhaust you will need the tune or flash
Nice Honda 700 xmr lol
😂
Did you do a tune?
It does need a tune
did you have to put a tuner?
and she will you buy one
Sounds like a grizzly 700
Sounds good!
It sounds like a stock exhaust that has a rust hole in it. I don’t understand why people want to do this? Not to mention many public riding areas will fine you for a modified exhaust.
Not trying to be that guy but its sound like a Honda
Should Hear it in person bro the video does not do it justice at all
Yea true
@@jaybailey1764
Lol i was thinkin weedeater personally but ya even the canam 1000’s sounds kinda off to me my 23 max limited stock sounds okay can’t imagine droppin another 500-1000$ for a muffler sound augmentation to each their own tho
صوتها مزعج
Not as good as the twins