Type of paper: 130 - 230gsm Follow me at / hermercraft Download the mode here: www.mediafire.c... Instructions: www.mediafire.c... LED Diagram: www.mediafire.c...
I started making paper models long before discovering your channel. My first few were not so good but with time my models started looking realistic. I am currently working on my 10th model (west jet 737) and your videos have inspired me to continue this work. This model will feature lights similar to your 777, but on much smaller level (only nav, strobe, beacon). Wish me luck! Thank you for this content!
Aiden Warrington I dont know if it will be posible with paper. Actually people who make RC planes use Depron Foam. And the other problems is that i dont have the equipment to build them. Otherwise i would have at least 1
Ennio La Bella You can, but is too thick. You can try with this paper, if you dont have any problem you can keep using it, otherwise use a softer paper from 120 grams to 180
AH HA! I thought you got your models from Canon! I knew I recognized some of them! But just so we’re clear they’re still gorgeous models and I love what you do with them.
Amazing job! However as a pilot, I have to correct you on one thing. The navigation lights (you used red and blue) are actually red and GREEN (I can't remember the orientation though) Still an amazing build!
You are right, but I noticed that the 777 uses a blue light in the right wing, even the original papercraft model has a blue dot in the right wing tip. flyinginireland.com/wp-content/uploads/2015/05/Emirates-Boeing-777-300ER-at-night-620x350.jpg look at this picture
***** Blue is ok, I saw many pictures and the light was blue, I also saw the templates of the model and the light was blue. I am an aircraft technician and I know that the right light is green, but is not the same in every airplane
Guerollo Jons, ya arme el de British Airways y no se me ocurre algun repaint para ese modelo. Tambien hice el Air Force One pero esta un poco dañado, tal vez lo vuelva a hacer mas adelante y le hago un video, gracias!
very WOW. I have to say your paper model making skills are fantastic. I can appreciate how difficult it would be to insert electronics into such a model. good job.
+Waldek Mochalsk Thanks you so much! I love to make paper models and I have made too many. This is a unique project for my collection, no other model has lights, it is cool but it was difficult to add.
Obviously this is really great work, however I should point out that the navigation lights(aka the lights on the end of the wings) should be red and green not red and blue. This is just a nitpick though, good job!
+Alpha 787 no puedo responder a sus comentarios directamente. No entendi del todo lo de la tabla, es la tabla donde se insertan un monton de cables y leds y resistencias y demàs? de ser así no se como hacer eso jaja, el circuito de este avion es el unico circuito que he hecho y lo arme sin la tabla
+Caran hio claro, primero se debe de descargar el archivo PDF con todas las piezas, en la descripción esta disponible, luego debe de comprar papel, cualquiera que sea mas duró que el papel de oficina, nunca use papel de oficina. Luego la goma o pegamento con cualquiera sirve. Después imprime el modelo, y para armarlo se guía con las instrucciones que también están en el enlace.
Gracias, (no sé, por algún motivo, me aparece un error) me los podrías enviar a mi correo? (Los del avión, y los planos eléctricos)Te lo agradecería!! Qué pena molestarte. caranhio@hotmail.com
es que aun están los enlaces de Mega, no sirven bien, tengo que cambiarlos por los de Onedrive. Revise su correo ahí le envíe el modelo, las instrucciones y el diagrama del circuito eléctrico
Thanks. And it doesn't really matters, the material is paper, so I can't spect to get a result like the real airplane, you can also note the internal glue tabs, specially those from the tail cone
+Gino Punsalan You used a bad paper perhaps, you should try different types of paper, and after some tries you can choose what type of paper you prefer to use. I spray a Lacquer Spray, but I cover the pieces with white glue to seal the porosity of paper, so the spray can work correctly
Pawan Hinata I don't but, if you want me to sell you one model, we can talk about it. This one from Emirates is not for sale, but I can make it again without the led lights
yes you're right, it was my first circuit, I didn't know anything, so I used the first cable that I saw, in fact the wingtips got too thick because of that
gracias! Lo arme como en dos o tres semanas, no recuerdo bien, es que también iba todo circuito y tenia que buscar los leds de 3 mm que no los conseguía por ninguna parte, por eso en el vídeo cerré las alas como al final, porque no conseguía un tamaño apropiado. Por suerte las conseguí tarde pero seguro
Hi, you can get the 777 model from this Site (cp.c-ij.com/es/contents/2027/air-india/index.html) however, it's not the same livery; I modified the Air India livery into Emirates, and I got a diagram for the Led circuit. If you want the Emirates version I can send you to you e-mail.
wOW, i love your work :) love the details and the anti collision led lights that you've install. Try to produce more and sell it to the market i promise you will make a lot of money of these... 2 thumbs up!
Hola Darío, ¡Gracias por su comentario! El papel que utilizo se conoce aqui (Costa Rica) como papel (Cartulina) Bristol, el gramaje no lo se con exactitud pero es aproximadamente entre 120 y 180 gramos.
Friend, can you please make a video explaining how to assemble the circuit, I have the materials but I don't understand many electronics and I don't know how to assemble it, thank you very much 😅😅😅😅😅😅😅
Hey buddy we have the same hobbies😳😳😳 I have the air india which u used in beginning and now i m planning to build this one😄😄but i wont be able to build better than u😅😅
how do you turn on the lights when it is completed i saw a hatch on the left side that opened anyway i love it its so cool please do more because i have not seen anymore latley
it is optional and the purpose of this is to seal the surface of the paper, then you can use a lacquer spray to give a glossy effect on the model and give some protection
un spray transparente acrílico, bueno lo que importa es que sea transparente y brillante, porque también hay uno opaco que no sirve, pero ojo que el spray no sirve en el papel así no mas, primero debe de cubrir las piezas con goma blanca para que selle la porosidad y además obtenga una superficie lisa, de esta forma el spray funcionará perfectamente
Excellent work, admire that you spent so much time for the video production....along with the production of the papercraft!! P.S. Absolutely love your music choice as well, thank you!!
Excuse me sir , do you have a full video of how to build that led light , i'll build that but i'm so confused to build , if you have a tutorial video , comment me sir , thanks sir
hii how cost of lights will be are with circuit i have made emirates and air india b777-300 paper aircrafts but without led lights so i want led lights in my planes...
Yes, you should use a harder paper and add a lot of glue when you will glue the wings to the fuselage, it takes a lot of time to dry too. You can also use an inner support
amazing
Ramy RC Thnaks!
Hi ramy
チャンネル登録してます!!!!いつも見てます!!!!
Whaaaaaaaaaaatt?
I started making paper models long before discovering your channel. My first few were not so good but with time my models started looking realistic. I am currently working on my 10th model (west jet 737) and your videos have inspired me to continue this work. This model will feature lights similar to your 777, but on much smaller level (only nav, strobe, beacon). Wish me luck! Thank you for this content!
Good luck
What a talent! Amazing work mate, I wish I had that talent and skills when I was a kid. Always loved aviation. Wish you the best!
thank you very much!!!
@@Hermercraft Cool. You're big, could you tell me what it takes for the lights, don't you have a list? I leave you my like
He does not need an Oscar the Oscar needs him🗣️🗣️🗣️🗣️🔥🔥🔥
This vídeo just got 1 million views! thank you all
;;35(5(77('unjhynhthhty Hermercraft
Hermercraft I challenge you for a plane built that actually will fly, do you want to do, this
1 - Yes 2 - No 3 - More information
Aiden Warrington I dont know if it will be posible with paper. Actually people who make RC planes use Depron Foam. And the other problems is that i dont have the equipment to build them. Otherwise i would have at least 1
***** Whats pk 661?
Plz send circuit diagram for navigation lights for my gmail
Mail id:: cnaveen451@gmail. Com
this guy is a legend...
Yes
He is lengend xD
He is not only a legend he is the beast in making aircrafts
yes!
hes no legend bruh
hes a god :)
Words cannot do justice to how awesome this is! Really clever and nicely made, well done.
thanks for your comment my friend
You're welcome! Keep up the great work :)
+tjf4375 Sure, I'll continue making more models :D
amazing mate Allah swt has given u exceptional talent keep it up
woow, wonderful art!!! O.o
it's my first time to see how the plane was made by a paper. great video bro!
btw, are you human???
+Adam Kurniawan im glad you liked it :)
***WHAT PAPER DO I USE??? I use Bristol paper 160 grams, its about twice the thickness of office paper***
+Hermercraft nice work nice vid.. bro, i wanna know the song name?
+Nikolayevic Muhamedoff thanks, it is Emirates boarding song
thanks again..
can I use 200 grams paper?
Ennio La Bella You can, but is too thick. You can try with this paper, if you dont have any problem you can keep using it, otherwise use a softer paper from 120 grams to 180
one word: Wow!!!!! Talk about talent, your model is absolutely incredible!!!
thanks! :)
AH HA! I thought you got your models from Canon!
I knew I recognized some of them!
But just so we’re clear they’re still gorgeous models and I love what you do with them.
a beautiful piece of art and craft!
thanks!
What is the scale of this model?
+COOL PAKISTANI 1:120
Oh wow. Really Impressive!
Amazing job! However as a pilot, I have to correct you on one thing. The navigation lights (you used red and blue) are actually red and GREEN (I can't remember the orientation though) Still an amazing build!
You are right, but I noticed that the 777 uses a blue light in the right wing, even the original papercraft model has a blue dot in the right wing tip. flyinginireland.com/wp-content/uploads/2015/05/Emirates-Boeing-777-300ER-at-night-620x350.jpg look at this picture
This was my first thought. Why go through all this work and not do research to ensure authenticity of the light configuration?
***** Blue is ok, I saw many pictures and the light was blue, I also saw the templates of the model and the light was blue. I am an aircraft technician and I know that the right light is green, but is not the same in every airplane
skipperfromscfd hii sir r u pilot???
Hermercraft thas is not blue in real emirates b777 i think that is green navigation light on right wing...
I wanted to congratulate you not only for your skill but your patience, congratulations again !!! Edgar Cedres
Thank you very much, I love to make this
WOOOOOW ..... MAGNÍFICO AMIGO!!! TE DOY LAS GRACIAS INMENSAS!!!
Guerollo Jons, ya arme el de British Airways y no se me ocurre algun repaint para ese modelo. Tambien hice el Air Force One pero esta un poco dañado, tal vez lo vuelva a hacer mas adelante y le hago un video, gracias!
Is this your only led model
umm Hermercraft what did you just say, the only thing I understanded in the message was British Airways and Air Force One
Port(Left) = RED
Starboard = Green, not blue?
I swear to god i have been watching this vid from 3 years over and over and over cuz my fav airline is emirates
You'll love the new A380 video, the project is in development yet but it will be available in 1 or 2 months
boi my guy was about to put an ENGINE in there insane work keep it up
Muito top!!! Vc poderia fazer um video especial ensinando a montar o diagrama dos led por favor ????
4:45 Is that a real flight? Where are you!?? 🤔
Aridaman sharma SILLY YOU 🙃 NO!!!
Aridaman sharma sry its real but it’s Plane spotting
very WOW. I have to say your paper model making skills are fantastic. I can appreciate how difficult it would be to insert electronics into such a model. good job.
+Waldek Mochalsk Thanks you so much! I love to make paper models and I have made too many. This is a unique project for my collection, no other model has lights, it is cool but it was difficult to add.
Obviously this is really great work, however I should point out that the navigation lights(aka the lights on the end of the wings) should be red and green not red and blue. This is just a nitpick though, good job!
+Alpha 787 no puedo responder a sus comentarios directamente. No entendi del todo lo de la tabla, es la tabla donde se insertan un monton de cables y leds y resistencias y demàs? de ser así no se como hacer eso jaja, el circuito de este avion es el unico circuito que he hecho y lo arme sin la tabla
Cómo lo armaste? Qué materiales son necesarios? podrías explicarme?
+Caran hio claro, primero se debe de descargar el archivo PDF con todas las piezas, en la descripción esta disponible, luego debe de comprar papel, cualquiera que sea mas duró que el papel de oficina, nunca use papel de oficina. Luego la goma o pegamento con cualquiera sirve. Después imprime el modelo, y para armarlo se guía con las instrucciones que también están en el enlace.
Gracias, (no sé, por algún motivo, me aparece un error) me los podrías enviar a mi correo? (Los del avión, y los planos eléctricos)Te lo agradecería!! Qué pena molestarte. caranhio@hotmail.com
es que aun están los enlaces de Mega, no sirven bien, tengo que cambiarlos por los de Onedrive. Revise su correo ahí le envíe el modelo, las instrucciones y el diagrama del circuito eléctrico
+Caran hio .
nice video. where i can find the LED's you used?
In Toys Electronics Shop :)
Amazon
Keep in note you'll need to make sure you connect the wires to the board so it doesn't twist and get flawed
This is awesome. I bet you weren't too happy with the red led illuminating the cabin. Nice effort nonetheless.
Thanks. And it doesn't really matters, the material is paper, so I can't spect to get a result like the real airplane, you can also note the internal glue tabs, specially those from the tail cone
What did you spray on the final model? I made a paper F1 model and some parts warped after a few months. It got so bad I threw it away.
+Gino Punsalan You used a bad paper perhaps, you should try different types of paper, and after some tries you can choose what type of paper you prefer to use. I spray a Lacquer Spray, but I cover the pieces with white glue to seal the porosity of paper, so the spray can work correctly
Srsly more people needs to subscribe to him he’s literally the best at making paper raft
Thank you very much!
Great job!
thanks :)
+Hermerizan Zanhermeri do you sell these planes?
Pawan Hinata I don't but, if you want me to sell you one model, we can talk about it. This one from Emirates is not for sale, but I can make it again without the led lights
Hermerizan Zanhermeri thanks :-)
@@Hermercraft Satisfay engine 😘😍🤓
Hi, I'm so interest how do you control the LED, can you tell me the method you used?
Wow, talk about paper airplanes being taken to the next level, this paper 777 looks so real!
Nice indeed. If any criticism were to be offered - I'd use smaller-gauge wiring for the LEDs, they seem unnecessarily thick for the job.
yes you're right, it was my first circuit, I didn't know anything, so I used the first cable that I saw, in fact the wingtips got too thick because of that
Hermerizan Zanhermeri A wonderful model nonetheless. Thanks for posting.
5:03 omg you're insane
xF
can I print this pdf on A3 paper?
Im not sure, try to print it using A4 or letter paper
gracias! Lo arme como en dos o tres semanas, no recuerdo bien, es que también iba todo circuito y tenia que buscar los leds de 3 mm que no los conseguía por ninguna parte, por eso en el vídeo cerré las alas como al final, porque no conseguía un tamaño apropiado. Por suerte las conseguí tarde pero seguro
Speak English or else!
Hola, disculpa. ¿Qué tipo de diodo ocupaste?
This is brilliant! I like your attention to detail!
Thanks, it was not easy but it worth the time spent
Hi, you can get the 777 model from this Site (cp.c-ij.com/es/contents/2027/air-india/index.html) however, it's not the same livery; I modified the Air India livery into Emirates, and I got a diagram for the Led circuit. If you want the Emirates version I can send you to you e-mail.
You have such a brain
BmTheSnowPea's Channel Thanks :)
Please sent to me > calvin_19xb@hotmail.com
Thank You Very Much .
Calvin Fong Check your e-mail
thank you
muy iqbal I dont have a full tutorial, im sorry. I just made that project once so far
is this A4 paper or A3
+Hermerizan Zanhermeri still you are VERY VERY talented
Darsh Patel thank you
Lam Sterling Letter. but its similar to A3
+Hermerizan Zanhermeri can you tell me what you need
2019 here !!
This is so so so amazing~
エンジン細か!!!!そして回るの!!!!????素晴らしいです!!!!!!!!
I love this Music and the emirates
Wow
How??????? YOUR PAPERCRAFT PLANES ARE SO AMAZING I WANT TO BE AS GOOD AS YOU!
Paper airplanes were always fun. But this is awesome!
+saleem waheed thanks!
Amazing airplane emirates
Hat's off to the videomaker.
Great work.
umeshrparekh Thanks a lot 😀
I wish those window are lighted also from the inside... But dis is amzing bro..
that could be a good idea, but it can be very hard, the window are tiny and the inside has all the cables and components for the circuit
Beautiful job and I love the video, but next time use magnet wire for the lights it will make you life much easier
Thanks for your comment and advice
Salute. Respect. Hats off. Buddy you are very skilled!
I love Emirates and your paper crafts I'm going to make my own
ما شاء الله.. والله شغلك رهيب... وانا مبسوط ب ماريو حقي. ههههههه
MAN great job, but really thick wires 1mm or 1.5mm would get the job done neatly
Yes, I couldn't find another size and it was my first circuit. Next time I make an LED lights circuit, Ill use thinner clables
Todos lo ven en video y yo he tenido esa maravillosa obra en mis manos lml
Excelente mi compa. Great things come by application, effrot and time.
Vea este Mae, pura Vida sanyo ;) y vieras como ha aumentado la colección últimamente, ahora estoy mas enfiebrado que nunca
+Hermerizan Zanhermeri No me extraña, fijo un día paso por ahí para ver esos nuevos modelos que armaste (y)
+Chang-yu Hung pura Vida Mae ahí me avisa
wOW, i love your work :) love the details and the anti collision led lights that you've install. Try to produce more and sell it to the market i promise you will make a lot of money of these... 2 thumbs up!
+ely8985 Hi, thanks! And this is more a like a hobby, I don't have a lot of time to make lots of models like this, it took like 3 weeks working hard
@@Hermercraft i'll try to install """""""""lights"""""""""
@@Rietzinks sure, good luck!
@@Hermercraft thank you
One of the coolest things is seen in a very long time. Thank you for sharing.
thanks!!!
You really like planes, huh? (Great work btw)
I love planes and i love flying and my biggest dream is to be pilot
@@fxt_prexen.7262 my dream is to own an airline company so I can always watch my favourite planes take off or land!
Can’t believe this blew up so well
Hola Darío, ¡Gracias por su comentario! El papel que utilizo se conoce aqui (Costa Rica) como papel (Cartulina) Bristol, el gramaje no lo se con exactitud pero es aproximadamente entre 120 y 180 gramos.
Dude this is cooool😎 yours is even more better than mine!
Thank you! I'm working in a similar project, it will be Emirates and will also have lights but this time the model is an A380
this is incredible, how much does it cost to make an airplane??? from start to finish???
So nice i love your room at the end i m a master builder in lego but such nice good pick by the way
thanks! now I have even more models in my bedroom
Amazing work indeed! You must employed a good air traffic controller though :)
I'm an aircraft mechanic :) but I'm just studying, even though I'm making the practice on a maintenance shop working with real 737's and E190's
@@Hermercraft *5 years later* Makes A380's 747-8i's Goes to a good school
you are very talented i cant do it which is sad for me
Where did you find the air force one b747 (its at the end, where you showed some of your hanged models)? thx
U r true fan of aircrafts
Friend, can you please make a video explaining how to assemble the circuit, I have the materials but I don't understand many electronics and I don't know how to assemble it, thank you very much
😅😅😅😅😅😅😅
HAAAAA I remember when I first watched this when it was uploaded. NOW LOOK WHERE WE ARE
Nice vid. The music made me smile.....always hear that when flying Emirates
Me to mate
Hey buddy we have the same hobbies😳😳😳
I have the air india which u used in beginning and now i m planning to build this one😄😄but i wont be able to build better than u😅😅
Awesome.. true aviation lovers.. excellent effort
thanks (Y)
how do you turn on the lights when it is completed i saw a hatch on the left side that opened anyway i love it its so cool
please do more because i have not seen anymore latley
Nice lights on the plane!
this is amazing work.....i wish my drawing of the emirates b777 looked that good.
Thanks! :D and practice a lot so you can make better artworks
wheres the best place to put the string to hold the plane, the wing or the fuselage?
the fuselage, with a single string, use both ends of the strings, one for the nose and the other for the end of the fuselage
What kind of lights are you using for the plane?
From where did you get the led lights
Mike Mai, I got a diagram for the circuit. I used a 555 Leds, and other things for the circuit. If you want the diagram I can send it to your e-mail
Pawan Hinata Hi, thanks for your subscription, you can get the diagram at the description of the video
Hermerizan Zanhermeri ok :-)
+Hermerizan Zanhermeri hi can you send the electronic diagram to me thank you RON r-mconacher@shaw.ca
+ron conacher you can find it in the description
+Hermerizan Zanhermeri hi again how do i find the discription sorry and thank you for getting back to me very impresive model you built nice job
The video of my childhood
Same 😢
AWESOME AWESOME!!!!!!!!!!! Excelent I just started to make one!
Sorry you might not reply but where do buy the leds?
Amazing! Very impressive! Lots of small parts
thanks!
May i ask, why need to use glue before cut out the pieces of structure?
it is optional and the purpose of this is to seal the surface of the paper, then you can use a lacquer spray to give a glossy effect on the model and give some protection
Hola Hermerizan Zanhermeri, buen trabajo!, oye que spray exactamente le pusiste al final?, yo los hago pero no uso nada al final
un spray transparente acrílico, bueno lo que importa es que sea transparente y brillante, porque también hay uno opaco que no sirve, pero ojo que el spray no sirve en el papel así no mas, primero debe de cubrir las piezas con goma blanca para que selle la porosidad y además obtenga una superficie lisa, de esta forma el spray funcionará perfectamente
Hi! Such a beauty idea to made this model, but where I can find the pages for the others model of your collection like Concorde or Dash8
The Dash 8 is a Plastic kit, and you can find the Concorde by seaching the model in google
Congratulations!!! beautiful work...
+Pietro Henrique Thanks man!
Excellent work, admire that you spent so much time for the video production....along with the production of the papercraft!!
P.S. Absolutely love your music choice as well, thank you!!
thank your for your nice comment! :)
It is emirates boarding music
I like that you did a stop motion video.
I'm glad you liked it
where can I buy just the lighting for a model? I got a 747 haven't put together cause I want to put lights inside
+Armando Alvarez go to an electronic shop
Excuse me sir , do you have a full video of how to build that led light , i'll build that but i'm so confused to build , if you have a tutorial video , comment me sir , thanks sir
i remember watching this as a kid
It is suppose to be red and green for the NAV. Light
some airplanes uses blue lights instead of green lights
+julian lamprea, con pegamento de oficina, goma blanca, o pegamento blanco, del que uno usa para la escuela
Could have used a separate,smaller power supply for the motors,other than that,great job!
hii how cost of lights will be are with circuit i have made emirates and air india b777-300 paper aircrafts but without led lights so i want led lights in my planes...
thank you very much hermercraft
It's sad that eventually the paper would become softer and finally, things like the wings would fall down. It would be fixed with inner supports.
Yes, you should use a harder paper and add a lot of glue when you will glue the wings to the fuselage, it takes a lot of time to dry too. You can also use an inner support
the hand craft is so cool!!
Thanks, because of you i have been able to make emirates boeing 777, are you having any more livery than air india
Awsome papercraft edwin Rodriguez
This is unbelievable; congratulations for this nice work !!
beaconmania thanks you very much. A similar project is comming soon 😎😁