Great introduction to explaining how the lnc 2000 works. I have 1 on my C5 and it work perfect never have and pre destination no nos backfire it works like a charm and worth every penny I spent on it who ever came up with such an ingenious little gadget is a smart som bitch it make my engine much safer to shoot the dope to it, what great engine insurance that little box provides!!! Thanks for taking the time to make this video sir, It was very educational
I'm looking at the wiring diagram for an '06 Vette with Z06 engine. The diagram shows an eight pin connector on each bank but the Lingenfelter module has four pin connectors for each bank.
@@ProjectDirty Hmmm, the AllData information shows connectors C139 and C140 are both 8 pin, and each carries only four ignition signals, plus 12v and reference ground.
@@ProjectDirty Thanks. I make an individual cylinder knock controller and need to update my installation diagrams. This is a lot cleaner than the way I was doing it.
My 2 step won’t engage for some reason I hooked up the yellow wire to a brake fuse that way it gets 12 volts when I step on the brake and it still won’t activate.
@@ProjectDirty I purchased one used and when plugging everything in the car doesn't start. It just cranks. I probably bought a bad one, but wanted to make sure I just wasn't wiring anything wrong
luis estrada I have power coming from my nitrous relay going to the 12v signal wire on the box and retard amount is set up with the dial on the face of the box
Great introduction to explaining how the lnc 2000 works. I have 1 on my C5 and it work perfect never have and pre destination no nos backfire it works like a charm and worth every penny I spent on it who ever came up with such an ingenious little gadget is a smart som bitch it make my engine much safer to shoot the dope to it, what great engine insurance that little box provides!!!
Thanks for taking the time to make this video sir, It was very educational
Literally just looking at these today 😂
Modded Projects Garage they are pretty slick
Very nice box for N20
I run the LNC2000 on my nitrous Silverado awesome box!
Yeah I have no complaints on my Corvette either
Where do I hook up the grey wire for analog out, iknow you mention it but didn’t say where you plug it to
I'm looking at the wiring diagram for an '06 Vette with Z06 engine. The diagram shows an eight pin connector on each bank but the Lingenfelter module has four pin connectors for each bank.
They should clip inline with the main coil pack harness all ls have the same main connector
@@ProjectDirty Hmmm, the AllData information shows connectors C139 and C140 are both 8 pin, and each carries only four ignition signals, plus 12v and reference ground.
Ah, I see now. The connectors are actually 8 pin, but the drawing on page 19 of their instructions make it look like it's only four pin.
@@jselectronics8215 glad you got it figured out brother
@@ProjectDirty Thanks. I make an individual cylinder knock controller and need to update my installation diagrams. This is a lot cleaner than the way I was doing it.
Best box you can buy for the ls
I’d have to agree!
Will this work with the power grid MSD ignition controller
Yes it just plugs in line of your coil packs
My 2 step won’t engage for some reason I hooked up the yellow wire to a brake fuse that way it gets 12 volts when I step on the brake and it still won’t activate.
What is your 2 step set to and what stall do you have
@@ProjectDirty I have circle d 3200 stall and it’s set at 2500
Message me on Instagram project_dirty_lsx and I will see what I can do to help
@@ProjectDirty ok sounds good
Just messaged you
Was wondering if you have an actual install video?
Eric Ng I don’t it is literally plug and play and run your trigger wires
@@ProjectDirty I purchased one used and when plugging everything in the car doesn't start. It just cranks. I probably bought a bad one, but wanted to make sure I just wasn't wiring anything wrong
Eric Ng yeah definitely shouldn’t cause a no start issue
I dont understand the rate part
How do you set up the retard timing?
luis estrada I have power coming from my nitrous relay going to the 12v signal wire on the box and retard amount is set up with the dial on the face of the box