VERY COOL custom build !!! You’re a much better Machinist/Craftsman than 99.99% of us could hope to be . Your custom Wire-Stock with adjustable Cheek-Rest is genius! I’ve got the Little Badger in .22 WMR down here in the States . Fortunately, I’m the only owner in America to actually find & purchase Chiappas’ factory Pistol Grip online 👌 After many months of checking & re-checking Chiappas’ website (always “Out Of Stock”) , a late-night Google search resulted in a totally rando webstore that had 1 (and only 1)…fits like a glove 👍 I also added : - a Folding Foregrip to the plastic Bottom-Rail…it’s 3-Position , which allows folding Back, Down AND FORWARD (Forward position both #1 extends Hand-Rail and #2 allows the action to more fully break for loading) - bought the over-priced Longshot Top-Rail (aluminum) to mount my Scope - used lower profile Scope-Rings in conjunction with the Carlson’s Hammer Expander (slightly narrower than the Chiappa factory Hammer Extention , but fits fine) - a 3” Muzzle Brake…mostly for looks (may hide Flash , if not reduce Recoil) - a Green Laser to the outer factory plastic Side-Rail - and have plenty of Black Para-Cord to wrap the Wire-Stock and/or Barrel . You called that replacement Washer a “Wave Washer” ??? Do you recall it’s size ? Also liked your use of Fuel Line tubing to wrap your Wire-Stock (brilliant) . Thanks for uploading ✌
i know of all the accessories but if you have a hard time getting that grip, what are our chances from canada? nil, nada, zip, bupkis, lol. alot of US dealers refuses to ship accessories out of your country and a few that do, runs the risk of seizure from our over zealous customs. some of our dealers here are afraid to stock accessories due to uncertainty with our anti gun liberal government so what are left for us to do but to adapt/mod... ya welcome.
Wish I could post a link here! Awhile back I designed(probably poorly) a 3d printed folding stock for the LB would love to get your thoughts on it! I can send the stl/files if you want too.
@@gnutzguy Sweet! see if you can check these out then. This was my first time messing around with the design software so it super rough. Its help up pretty well, although i want to change the stock to have some more thickness where it connects to the pic rail because it tends to pop off, Might make it solid or a thicker mount.
What about swapping out the pivot pin/bolt with a pull pin so you can separate the barrel fully? Just like a takedown. Sould not have violated any Canadian rules as you cannot fire it in any way... Side question. What type of metal would you say the receiver is? Look like aluminum alloy or aluminum / magnesium. Is it at least a good quality mold? Or is it molded then machined?
Pull pin will not work bcos the receiver will be wobbly resulting in poor accuracy. New model just introduced has easy separating pins. I'm trying to get my hands on one. Any leads is much appreciated.
lpvo is the wrong scope for such a little lightweight takedown .22 lol. Thats almost as bad as putting an LPVO on a 10/22 takedown lol. You need a simple red dot.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Nice build, execution and follow through 👍
Glad you like it
VERY COOL custom build !!! You’re a much better Machinist/Craftsman than 99.99% of us could hope to be .
Your custom Wire-Stock with adjustable Cheek-Rest is genius!
I’ve got the Little Badger in .22 WMR down here in the States .
Fortunately, I’m the only owner in America to actually find & purchase Chiappas’ factory Pistol Grip online 👌
After many months of checking & re-checking Chiappas’ website (always “Out Of Stock”) , a late-night Google search resulted in a totally rando webstore that had 1 (and only 1)…fits like a glove 👍
I also added :
- a Folding Foregrip to the plastic Bottom-Rail…it’s 3-Position , which allows folding Back, Down AND FORWARD
(Forward position both #1 extends Hand-Rail and #2 allows the action to more fully break for loading)
- bought the over-priced Longshot Top-Rail (aluminum) to mount my Scope
- used lower profile Scope-Rings in conjunction with the Carlson’s Hammer Expander
(slightly narrower than the Chiappa factory Hammer Extention , but fits fine)
- a 3” Muzzle Brake…mostly for looks (may hide Flash , if not reduce Recoil)
- a Green Laser to the outer factory plastic Side-Rail
- and have plenty of Black Para-Cord to wrap the Wire-Stock and/or Barrel .
You called that replacement Washer a “Wave Washer” ??? Do you recall it’s size ?
Also liked your use of Fuel Line tubing to wrap your Wire-Stock (brilliant) .
Thanks for uploading ✌
i know of all the accessories but if you have a hard time getting that grip, what are our chances from canada? nil, nada, zip, bupkis, lol.
alot of US dealers refuses to ship accessories out of your country and a few that do, runs the risk of seizure from our over zealous customs.
some of our dealers here are afraid to stock accessories due to uncertainty with our anti gun liberal government so what are left for us to do but to adapt/mod... ya welcome.
Wish I could post a link here! Awhile back I designed(probably poorly) a 3d printed folding stock for the LB would love to get your thoughts on it! I can send the stl/files if you want too.
i think its fine, you can post here a link to your pic, just not to a dealer.
@@gnutzguy Sweet! see if you can check these out then. This was my first time messing around with the design software so it super rough. Its help up pretty well, although i want to change the stock to have some more thickness where it connects to the pic rail because it tends to pop off, Might make it solid or a thicker mount.
What about swapping out the pivot pin/bolt with a pull pin so you can separate the barrel fully? Just like a takedown. Sould not have violated any Canadian rules as you cannot fire it in any way...
Side question. What type of metal would you say the receiver is? Look like aluminum alloy or aluminum / magnesium. Is it at least a good quality mold? Or is it molded then machined?
Pull pin will not work bcos the receiver will be wobbly resulting in poor accuracy. New model just introduced has easy separating pins. I'm trying to get my hands on one. Any leads is much appreciated.
Well done, it's beautiful. However, I'm not talented enough to build that, I just need to find a place to buy a replacement stock.
I wish someone would make a kit that bolts on.
Great work, an inspiration.
Thank you! Cheers!
You made this firearm quite appealing! Probably won't invest but you got a nod out of me. Good job!
aaah, at least do the pistol grip, lol. .... thanks anyways.
New subscriber. Great video. Thank you
Thanks for the sub!
Cool!
thanks
Really pretty cool man. The vertical hand hold sort of balances out the profile.
i think you are right. thanks
i update my thumbnail pic. what do you think?
@@gnutzguy 😁 For me, makes it look complete. Good job man
thank you kindly
lpvo is the wrong scope for such a little lightweight takedown .22 lol. Thats almost as bad as putting an LPVO on a 10/22 takedown lol. You need a simple red dot.
I will be putting on the lvpo when I do the accuracy test. Lol
I feel bad for the loss of freedoms for Canadians and being ruled under a tyrannical dictatorship.
yup... thanks for the kind words jonast.