Thanks buddy. Good you can watch it cuz i can't. It stays buffering. Stupid YT stuff. I can play other vids but not this one. I need to look into this again. Thanks for watching brother 👊
Have you tried the 2146 pipe? Wondering if it is worth a try? I have the 2135 evo2 as well and am pretty happy with it but see some people in Germany putting the 2146 on Ninja B07s and AD3s
It is great. And easy. You have to be careful what stuff to use for different materials tough. Always thought these things were very expensive but they aren't. Should have got one way sooner. Thanks for watching buddy 👊
I will find out in 10 to 15 gallons how the quality and longevity on these os engines is. I must say the bearings on the newer fx engines don't last long. Maybe they switched from manufacturer because they didn't even last 4 gallons. On the 303 and 303L. Definitely not as good as on my 301. Fx engines do have an outstanding idle, but these os ad engines also idle really good. The 303L is still my favorite engine, but this is really close.
@@evanmeneilley3228it's pretty damn close. it's about the same feel as the 301. advantage on top end for the os. These engines are definitely not far apart.
Unfortunately due to family situation i can't travel far upcoming months. There is the possibilitie i'm called home. So think not much racing this season. Only a couple close to home.
Thanks. That's a tough question. I would have to say yes for now, since fx been really good to me. But who knows if i reach 10 to 15 gallons on these os engines without any troubles. I absolutely love the feel of this engine too. 👌Thanks for stopping by bro👊
Love the content ! I am loving the way the AD3 drives or I should say appears to drive , I think I'm going to have to pick one up in the very near future. My Muran Spower B7tt arrives this week so I'd love to compare the 2. What gearing are you currently running?
Thank you very much. I love the way this engine feels. I am a square engine guy, this is not exactly a square engine but close. Absolutely love it. Spower b7tt is really nice. Standard long stroke. Also runs really good from what i've seen. They changed the gearing on the '23 model, but i'm still using the old gearing. 13 clutchbell with 48 spurgear and 14 bevel drive with 46 crowngear. Appreciate you watching brother 👊
Do you have any experience with the Mephisto? I think its going to be under powered until the squish it tighten and some blow down is added. @@kings-racing
@@kawicepticon8866 i don't have any experience with the Mephisto, but the squish needs adjustment on a lot of engines to maximize the performance. I always experiment with that to see how the engine runs.
yep I do too, once I break them in I attack the shimm stack,on Novarossi I always find the 5-7 ports are shimmed wayyy too much I typically remove .30-.20 @@kings-racing
It's a great engine. I did do the break in and test&tune on 25% fuel. Tried it once on 16% on a raceday and couldn't get it to run that good in the time i had. So really need to do a propper test on 16%. Last races i ran an FX engine. They do really well on 16%. I'm in the Netherlands, but often racing in Germany. Thanks for watching.
Thanks Tony👊 turned out really nice, And I just did this with liquid mask and spray cans. This is my first Light weight body but definitely not gonna order them again. Such a shame if it gets tore up quick. Thanks for stopping by brother 👍👊
@@kings-racing I’m struggling to get a Xray xb9 bodies over here in Australia 🇦🇺 they want $100 bucks then shipping lol 😂 an then I have to paint lol 😂 u an tasty b are awesome 👏 at this painting game 🫡🤜🇦🇺💯👏
@@tonysands2837 $100 bucks, damn. That's crazy. Tasty B is next level with his airbrush. His work is super clean. He is gonna paint a body for me so looking forward to that. Sure it's gonna be mega awesome. Planning a trip to France somewhere next month to visit him a couple of days. Run the track over there and have a good time. Really looking forward to that aswell ! 🤘💯👊
@@kings-racing that sounds insane bro you guys will have a blast!!! He is definitely 💯 awesome on the air brush bro🤜 definitely get some footage of you guys ripping bro love to see that!!!
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
You're driving skills are getting better and better. Great video!
Thanks Woogie👊
Good driver
Thank you
What a beautiful track. Where is it if I may ask?
Thank you. It's in Helmond in the Netherlands. Club: Mach One Helmond
Awsome Kings, both the video and the paintjob 👍👍 Im back and going to take care of one of the OS that are wainting on the shelter
Thanks buddy, definitely one to look forward to 👍👍👍. Enjoy buddy👊
Awsome brother, nice intro. Nice setup you have my rc friend 👍🏻👍🏻👍🏻👊🏻💯💪
Thanks brother. i really enjoy doing stuff in my workshop. Thanks for watching buddy 👊
awesome looking rc body and cool run on the track
Thanks bro. Appreciate you stopping by 👍👊
It's rippin' rig looks pretty too! Nice paint job brother!
Thank you very much SK. Appreciate you stopping by 👊
love the flame paint jobs and the ramstein music intro nice job kings
Thanks buddy. Good you can watch it cuz i can't. It stays buffering. Stupid YT stuff. I can play other vids but not this one. I need to look into this again.
Thanks for watching brother 👊
I could play it on my laptop but not on Phone or tablet. Now i can....after 45 minutes. Very strange
Sounds good. You still prefer the FX?
Your paint job turned out awesome great content keep up the good work
Thanks Hotrod appreciate you stopping by👊
Fark thats a nice astro track! Wowza. Lean because your a 40+ savage behind that radio. Fuck bro legend. Man im want that knowledge shit son 💯
Yeah, it's a very nice track. Love running here. Make that 40++++++😂 Thanks for watching bro👊
Nice, kings is back 🎉
Thanks buddy 👊
Have you tried the 2146 pipe? Wondering if it is worth a try? I have the 2135 evo2 as well and am pretty happy with it but see some people in Germany putting the 2146 on Ninja B07s and AD3s
I don't have the 2146 so never tried that. I ran it with the 2135 and recently with the hipex 2034. Smoother bottom end but performed really good.
@@kings-racing Will do some tests and can give my feedback. Just got a hard coated 2135 myself so it will remain my go to pipe.
That kind of cleaner would be great! Looks like it works well 👍
It is great. And easy. You have to be careful what stuff to use for different materials tough. Always thought these things were very expensive but they aren't. Should have got one way sooner.
Thanks for watching buddy 👊
Sorry to hear that kings hope get sorted
Thanks Homeboy
As a house washer, use anti corrosion house wash surfactant thank me later. Its all about surfactants and water density
Still trying some stuff out. I'm new to this. Thanks for the tip👍 appreciate it👊
OS 2104-5 or FX K303-L ?
Nice videos 💪
Thank you. I really really like the FX K303 and K303L
Nice car bro ✨🏁
Thanks Yogi👊
Ty Tessman told me the FX engine has better longevity than the previous OS engines he used. He also said it idled better.
I will find out in 10 to 15 gallons how the quality and longevity on these os engines is. I must say the bearings on the newer fx engines don't last long. Maybe they switched from manufacturer because they didn't even last 4 gallons. On the 303 and 303L. Definitely not as good as on my 301.
Fx engines do have an outstanding idle, but these os ad engines also idle really good. The 303L is still my favorite engine, but this is really close.
FX don’t brap like that tho 🏁🏁🏁
@@evanmeneilley3228it's pretty damn close. it's about the same feel as the 301. advantage on top end for the os. These engines are definitely not far apart.
Kings the Herts gp booking is open
Unfortunately due to family situation i can't travel far upcoming months. There is the possibilitie i'm called home. So think not much racing this season. Only a couple close to home.
Nice vid. What car stand/station is that your using?
Thanks 👊 it's a Fastrax stand. FAST407B
@@kings-racing the X-ray stand you’re using at the track that holds the fuel tank and tools?
Guess everybody else is stuck in traffic😅😅😅
😂no, they went home early🤣
what wing is that?
Its a Beta 1/8 off-road wing. Part number BE1002
Sounds good. You still prefer the FX?
Thanks. That's a tough question. I would have to say yes for now, since fx been really good to me. But who knows if i reach 10 to 15 gallons on these os engines without any troubles. I absolutely love the feel of this engine too. 👌Thanks for stopping by bro👊
Love the content ! I am loving the way the AD3 drives or I should say appears to drive , I think I'm going to have to pick one up in the very near future. My Muran Spower B7tt arrives this week so I'd love to compare the 2. What gearing are you currently running?
Thank you very much. I love the way this engine feels. I am a square engine guy, this is not exactly a square engine but close. Absolutely love it. Spower b7tt is really nice. Standard long stroke. Also runs really good from what i've seen. They changed the gearing on the '23 model, but i'm still using the old gearing. 13 clutchbell with 48 spurgear and 14 bevel drive with 46 crowngear.
Appreciate you watching brother 👊
Do you have any experience with the Mephisto? I think its going to be under powered until the squish it tighten and some blow down is added. @@kings-racing
@@kawicepticon8866 i don't have any experience with the Mephisto, but the squish needs adjustment on a lot of engines to maximize the performance. I always experiment with that to see how the engine runs.
yep I do too, once I break them in I attack the shimm stack,on Novarossi I always find the 5-7 ports are shimmed wayyy too much I typically remove .30-.20 @@kings-racing
About to buy this engine. Are you in Germany also? I am an American living in Germany about an hour south of Frankfurt.
It's a great engine. I did do the break in and test&tune on 25% fuel. Tried it once on 16% on a raceday and couldn't get it to run that good in the time i had. So really need to do a propper test on 16%. Last races i ran an FX engine. They do really well on 16%.
I'm in the Netherlands, but often racing in Germany. Thanks for watching.
@@kings-racing thanks for the reply. I decided to go with the OS Speed AD3. Found it for a great price.
WoW nice car, name the car ?
Thank you. This is the '23 Xray xb8
@@kings-racing Thanks, it's to compare which one to buy
@@kings-racing And what is the difference between 2023 and 2024?
Damn bro that is sexy definitely best looking thing around 🤜💯🇦🇺🫡 awesome job
Thanks Tony👊 turned out really nice, And I just did this with liquid mask and spray cans. This is my first Light weight body but definitely not gonna order them again. Such a shame if it gets tore up quick.
Thanks for stopping by brother 👍👊
@@kings-racing I’m struggling to get a Xray xb9 bodies over here in Australia 🇦🇺 they want $100 bucks then shipping lol 😂 an then I have to paint lol 😂 u an tasty b are awesome 👏 at this painting game 🫡🤜🇦🇺💯👏
@@tonysands2837 $100 bucks, damn. That's crazy.
Tasty B is next level with his airbrush. His work is super clean. He is gonna paint a body for me so looking forward to that. Sure it's gonna be mega awesome. Planning a trip to France somewhere next month to visit him a couple of days. Run the track over there and have a good time. Really looking forward to that aswell ! 🤘💯👊
@@kings-racing that sounds insane bro you guys will have a blast!!! He is definitely 💯 awesome on the air brush bro🤜 definitely get some footage of you guys ripping bro love to see that!!!