HOW TO Descale the Delonghi Magnifica S 22.110.B
HTML-код
- Опубликовано: 23 авг 2024
- In this video, we descale the Delonghi Magnifica 22.110.B automatic coffee machine using Delonghi's own descaling solution. This requires a soak, and two rinses. Follow along and stop the video or rewatch, to get all the steps. You can also follow directions down below.
☘️ Patreon: / tomscoffeecorner
Thank you to the current patrons(!): ⚡ ShadowGuy⚡Mikael Koffman ⚡
Important!
Before use, read the instructions and the labelling on the descaler pack.
It is important to use De Longhi descaler only. Using unsuitable descaler and/or performing descaling incorrectly may result in faults not covered by the manufacturer's guarantee.
Descaler could damage delicate surfaces. If the product is accidentally spilt, dry immediately.
Descale the appliance when the (6) M light «B5» «fig.34» on the control panel «B» flashes.
Turn the machine on and wait until it is ready for use.
Empty the drip tray «A17» and grounds container «A13» and return both to their positions in the machine.
Empty the water tank «A9» completely and remove the water softener filter «(3» if present).
Pour the descaler «C2» into the tank up to level A (corresponding to a 100ml pack) marked on the inner surface of the tank «fig. 35», then add a lite of water up to level B «fig. 36» and put the water tank back in the appliance.
Place a container with a minimum capacity of 2 litres under the cappuccino maker «A18» and coffee spouts «A12» «fig. 37».
Wait for the coffee lights to come on steadily.
Press and hold the 2) If| button «B5» «fig. 38» for at least 5 seconds to confirm that you have added the solution and begin the descaling procedure. The light on the button comes on steadily to indicate that the descaling program has begun.
The clil light flashes to indicate the hot water/steam dial «A19» must be turned to the I position.
When the dial is turned to the I position, the descale programme starts and the descaler liquid comes out of the cappuccino maker and coffee spouts. A series of rinses and pauses is performed automatically to remove all the scale residues inside the coffee machine.
After about 25 minutes, descaling stops and the aD and fb lights flash on the control panel. Turn the hot water/steam dial to the O position.
The appliance is now ready for rinsing through with clean water. Empty the container used to collect the descaler solution. Extract the water tank, empty, rinse under running water, fill with fresh water up to the MAX level and put back in the appliance. The el light flashes.
Place the container used to collect the descaler solution empty under the cappuccino maker and coffee spouts.
Turn the hot water/steam dial to the I position to begin rinsing. Hot water is delivered first from the cappuccino maker, to continue and end with the coffee spouts.
When the water tank is completely empty, the D and alb lights flash on the control panel. Tun the steam/hot water dial to the 0 position.
Empty the container used to collect the rinsing water. Remove the water tank, replace the water softener filter (if removed previously), fill the tank up to the MAxlevel with cold water and insert in the appliance. The steam/light flashes.
Place the container used to collect the rinsing water empty, under the cappuccino maker.
Turn the hot water/steam dial to the I position. The aplliance begins rinsing again from the cappuccino maker only.
When it has finished, the only steam light flashes on the control panel. Turn the hot water/steam dial to the 0 position.
Top up the water tank with fresh water to the MAX level and put back in the machine.
The descaling cycle is now complete.
----------------------------
DISCLOSURE: Some of the links on this page are affiliate links, meaning, at no additional cost to you, I may earn a commission if you click through and make a purchase and/or subscribe. Affiliate commissions help fund videos like this one.
#TomsCoffeeCorner #DelonghiMagnifica #Descaling
Sweet Dreams by BatchBug | / batchbug
Music promoted by www.chosic.com...
Creative Commons Attribution 3.0 Unported License
creativecommon...
Thanks for video. Just finished descale work caffe machine. It was almost stuck but now we can enjoy your caffe again. I rise a cup of cafee Cheers!
It is important to mention that in some Magnifica S machines, the manual only indicates to do one rinse only, and this is the problem that many people have.
My machine was purchased on July 2023.
meaning you should do one rinse or two?
@@meteora8888 yes
FINALLLLLLY I have got it! I had a good friend try and show me and I was freakin useless at trying to master the descaling of this beasty! Nowwww I get it. Thank you Tom, Master Of the Beast! I now gets it mannn!
Excellent! Glad to hear it!
Thank you so much! I´m about to do my first descaleing on my mashine, and I was very nervous about this, before I watch this video.
Delonghi should pay you for this.
A really “ hallelujah” moment!! Thank you 🤩
Excellent video!
Thank you so much had no idea had to do this til the light came on lol
👍 Very good explained!
Thank youu❤
Thank you good video well explained
Hi Tom thank you for your help as the manual is like (useless) for me but I would like to turn the temperature down for my coffee as I find it far too hot and feel like it ruins the taste
Thank you
Thanks so much for watching!!!
Thank you 😊
You're welcome 😊
Thank you!
You betcha!
Is there ever a long pause after only descaling for a very short period (around 40 seconds)? Mine has paused for five minutes. Should I press the descaler button again and start again?
Had this issue too
during the rinse, the water won’t come out from the steamer but rather from the place where the machine pours coffee. how can i fix it ?🙁
Well, the machine decides itself where to output the solution and or rinse, so it might be part of the program. The models also slightly differ over time. Good luck!
yes the model was different and it needed two rinse, first from coffee tube and the second one from the steamer. after that it finished the program
Hi,
Huge relief to find this vid rather than going thru the manuals once again.
One question tho. The amount of water going thru the steam tap is maybe 90% of the total amount. I get very little going thru the “main tap”. Why is that?
Well, most machines let it go through the steam wand...it depends on the manufacturer, but a lot of them just do it that way. Maybe because it's the furthest path for the descaling water to pass through.
tnx
Mine only comes out the milk frothed and stops
Not doing the cycle
Please help
I descaled many times, but the water never comes through the coffee spout when descaling. Why is this? I have the Magnifica S
Oh, well sometimes models are different. What does it say in your instructions?
I have same issue, that's why after the program. I put the water back in. And press the descale button once. So the water comes out front. And repeat that like ten times or so
You have two ways to do it short and long version.
Hi Tom,
Will you see a big difference in terms of espresso quality and extraction between a Breville Barista Express and a Delonghi Magnifica?
Thank you for the excellent videos!
Well yes. The BBE will be very decent. The Magnifica doesn't even make espresso - only "coffee crema".
@@TomsCoffeeCorner thank you very much for the answer!
@@TomsCoffeeCorner coffe crema is an italian synonym for an espresso with creme, of course it does espresso, what a bullshit
Haha, no coffee crema is a coffee with some crema on top. Espresso is something totally different. A coffee has a 15:1 ratio, extracted at like 3 bar on these machines, while an espresso as a 2:1 ratio, extracted at 8-9 bar. So the difference in taste and texture is immense.@@onimusha13
Just wish the time to descale didn't keep increasing. Mine now takes up to an hour and a half. Spends more time just sat doing nothing, than cleaning.
How old is yours?
@@rokdovecar5275 Coming on 5 years.
Just ran a cleaning cycle. It took 30m to clean (20 of which were the first part of the cleaning cycle).
Could you please make a video how to make the best cappuccino with this machine? I have in work this same but it isn’t same when i make coffee with this machine and with dedica ec685.
Funnily enough, I did make a video about this. But the quality is not great. Of course you will never match the quality of the Dedica with this machine.
Hi Tom, I have this machine, and Im getting different levels of espresso when I press the espresso button..The first pull seems to follow the level I have pre-set, and anything following would pull a lot more. Which part can I replace to get the levels the same on every pull? TIA
Well it has a water wheel inside, which is not super accurate. But if it's way off, then maybe that part is failing. I would just stop it manually though, if it was mine...
@@TomsCoffeeCorner thanks Tom! I assumed it was one of the computer boards not saving the level that I’ve set
Hello I found your vids searching for a solution on line I just got a delonghi magnifica evo I have everything setup it runs fine but the pucks are getting stuck in the infuser and not falling in to the puck tray I'm not sure what to do. no one seems to be having this problem. I suspect the infuser isn't pushing the puck up all the way so the arm can't flick it all off. Do you know what it could be?
Hi there! I have not ever run into that problem, and we’ve used this machine at work every day, for years. I would remove that cartridge and clean it, inspect it for any obvious issues like a broken spring or something. It sounds like the mechanism to push the puck away may be defective.
@@TomsCoffeeCorner I was thinking that too I'll look further at it tomarrow its late where I am. I wasn't sure cos it tamps the pucks fine just not dispenses them
I Did alla the steps but the red Light still flashig ? What should i so? 😊
Hmm, maybe try rinsing again. Or if that doesn't work do the process over, but just with water.
Hi, I have done this but the red light keeps flashing. How do I reset it ? Thanks a lot
Have you tried cycling power to it, by unplugging?
@@TomsCoffeeCorner I have left it unplugged overnight and this morning it still displayed the error. Is power cycling any different to what I have done ? Thanks
Same issue here, still no solution work :S
@@ForeverFrengers I have managed to sort it by doing an extra long cycle and cleaning a bit the area where the compressed powdered coffee is expelled from. Good luck
Yeah, same here. It worked :)
@@jaimeTF
No need the tablets?
I use descaling solution.
Pleasee make a review video of this machine 😭
Maybe someday...cheers!
please help
ECAM22.110.B Magnifica S Automatic
did you know how to reset to factory setting
Hmm, I am not sure right now. Does anyone know if this has a default setting?