Estimating - Probably a 20v drill and assuming a 4 amp hour battery I estimate 7 to 7.5 miles. Top speed is 25-28 mph for a couple of minutes if gearing is right. Cruising speed probably 15-20 For Distance - I'll assume 4 amp hour battery. Most 20v drills make about 500 watts (hard to find info), so they are pulling 25 amps. At full speed putting all that power into the bike it could last maybe 9 minutes. He looks like he is going 15 mph. 2.25 miles. In reality though, its probably only using half the power, and half the time one is coasting, so 2.25 * 4 = 9 miles. Take 25% away to account for efficiency. So Probably 7 miles. I used a bike distance calculator online and it said 8.6 miles with a 24v system. Drill is probably less efficient so probably 7.5 mile or so this way. For Speed - I used a bike watts calculator to maintain a certain speed at 400 watts one can sustain 25-28 mph. If the drill has 500 watt max capability its only so efficient so I'm just estimating 20% loss or so. I think that would only be possible for a minute or so before battery drain lowers the output.
my 20v batteries only run about 10 mins straight, so maybe a mile or so if you are lucky. also remember, this thing is straight geared, you can't coast and when your battery is out you're pretty much done unless you wanna pedal against the motor.
Do you know what this doesn’t look super practical; however, this is very creative! Hopefully our battery technology will improve in the next few years and things like this would really be something else. I myself would prefer the steam powered bicycle that you can cook your dinner on
O problema é que a parafusadeira trava quando não é acionada, isso significa que se a bateria acabar vc tá na mão. Se colocar uma catraca, dará pra colocar pedal, mas ela não poderá ir pra trás sem ter que erguer a roda
3/4 mile - 1.5 is my personal guestamet, I don't think that it would make 2 miles. Cool & ingenious idea, just not very practical. Nice to know that these things are possible though. Cool video 😎😎😎😎😎👍
ive seen this done at least 6 times before and this is the best by a mile and the easiest, and some others you cant pedal only the drill powers it, and yes the large cog will shark fin in a while but most don't use it just the smaller cog and bike parts are cheap if not free on council pickups,
@@mr.engineear0987 i've never heard of a "reducer" motor used in a handdrill.. it's likely a brushed or brushless motor used in one of those.. and i have had one catch smoke while using it during drilling.
I think it’s the gear ratio is wrong what do u think 🤔 And y did u cut off the other crank arm? Where is your other foot supposed to go? I love the video thanks for a great idea I will post mine once I get it designed Remember the ppl that hate or dislike aren’t True inventors inventors make solutions Still don’t know what the haters do lol 😝
5 mile range per charge??? Did you use 1.5 or 2.0 ah batteries??? Are you familiar with Stanton, Inc? They make an interesting 2 to 1 gearbox for drill powered bike? Interesting stuff.
Bien.buena idea. Tambien puedes colocarle un par de barritas en el cuadro de la bici mas al frente asi no tienes los pies hacia atras y tienes mas apoyo.
Show de bola MAn !!!!! Parabens pela feito e trabalho MAn ! Ai nem esquenta com algum comentarios DEPRECIATIVOS porque grandes inventores do MUNDO tambem foram DESACREDITADOS. ((((Maximo.Respeito))))👊
Every thing is backwards the throttle on the left hand side and you have to twist it away from you no peddles and a battery that will take you down the road and maybe back if you’re lucky
If you bring 15-20 spare drills with you, you will be probably doing 15-20 km. Plastic gears and no cooling, exactly what you expect in an e-bike powertrain.
Very clever stuff. Wonder if the motor out of an electric leaf blower or strimmer could be used in its place for more of a kick. Also, you put the throttle on the wrong side and backwards 😆😅🤣
Идиот. Из велосипеда сделал мотоцикл, только что делать если аккумулятор сядет? Отталкиваться от земли ногами что ли типа беговела? В электро-велосипеде это и есть основное преимущество что можно на педалях ехать и на моторе и комбинированно. А на какую погоду рассчитано это чудо? Только на летнюю и сухую? А дождь пойдет - надо зонт держать над шуруповертом, да смазку на звезды по новой намазывать.
xD on a flat plane this will work but once the bike need more torque the drill will destroy it self also very high chance long use will catch the drill on fire
It's cool, but I forsee hrs an hrs of tweaking the drill just right and ect. Here's where, actually whst i think is or could be the golden diy robo bike. Now it could be gas or battery..... chainsaw. Swich chains to something less cutty an moint the motor like a motorcycle. I actually startrd one yrs ago with my baby stihl an an antique Evans. Got the idea cuz it was firewood season. But dropped the idea after chopping my stuck big saw out with a hatchet.....
You lacked the portable charger to charge the battery because when the battery runs out how are you going to continue? If you didn't put the pedals back, what brilliant ideas
I built one of these, but first time locking it to a post, someone nicked the drill. It was a long pedal home. LOL
Lol 😂😂
I think it would be a great idea to mount the drill in a lockable housing structure, which will then be welded to the bike.
……how about bringing an extra battery along?
😂😂😂
@@Moon-magic109 did you read the original comment? He said they nicked the drill, not the battery 🤡🫵🏽
Wouldn't it be possible and better to modify a battery charger and use a speed/volt controller. Once bike is parked, unhook the battery 🔋?
0:09 that is some impressive grip strength there
Speaking of grip strength, how about 2:17? 🤣
Nothing like a good grip strength if you know what i mean 🤣
ah yes, perfect for all day, and alll night… wait
I bet one of them small cordless chainsaws could work better. With other applications
Very ingenious way of mounting the drill!
Love it. What distance can you achieve before the battery runs out?
Carry a couple extra batteries.
@@bolivariano75 Still doesn't answer my question tough does it.
Estimating - Probably a 20v drill and assuming a 4 amp hour battery I estimate 7 to 7.5 miles. Top speed is 25-28 mph for a couple of minutes if gearing is right. Cruising speed probably 15-20
For Distance - I'll assume 4 amp hour battery. Most 20v drills make about 500 watts (hard to find info), so they are pulling 25 amps. At full speed putting all that power into the bike it could last maybe 9 minutes. He looks like he is going 15 mph. 2.25 miles. In reality though, its probably only using half the power, and half the time one is coasting, so 2.25 * 4 = 9 miles. Take 25% away to account for efficiency. So Probably 7 miles.
I used a bike distance calculator online and it said 8.6 miles with a 24v system. Drill is probably less efficient so probably 7.5 mile or so this way.
For Speed - I used a bike watts calculator to maintain a certain speed at 400 watts one can sustain 25-28 mph. If the drill has 500 watt max capability its only so efficient so I'm just estimating 20% loss or so. I think that would only be possible for a minute or so before battery drain lowers the output.
@@BigFishEnergy i would like to take a 24v v4 brushed motor from an Milwaukee impact, with those 5 ah batteries
my 20v batteries only run about 10 mins straight, so maybe a mile or so if you are lucky. also remember, this thing is straight geared, you can't coast and when your battery is out you're pretty much done unless you wanna pedal against the motor.
1 decent bump, and I guarantee the position of the drill moves, essentially making you walk home.
Do you know what this doesn’t look super practical; however, this is very creative! Hopefully our battery technology will improve in the next few years and things like this would really be something else. I myself would prefer the steam powered bicycle that you can cook your dinner on
As cool as it is I have to question the durability because the drill is not designed to be running constantly like it would be when riding.
Yeah that thing would start smoking after like 15 mins of just full send lol
Very smart and simple... That's the best way for gear reduction, lightweight and powerful
O problema é que a parafusadeira trava quando não é acionada, isso significa que se a bateria acabar vc tá na mão. Se colocar uma catraca, dará pra colocar pedal, mas ela não poderá ir pra trás sem ter que erguer a roda
Da para desmontar a parafusadeira e tirar os pinos que travam, ai daria pra pedalar
Mais a melhor solução seria colocar uma roda live na parafusadeira
where did you buy that sprocket on drill?
Can someone ask him in his language?
Beautiful innovation and technology I truly appreciate this piece thank you for your knowledge oh wise one ☝️
How far can you go on a single fully charged battery?
Its pretty deceant. Its enough to make it to your moms house and back
Even if it’s not good. He could have multiple spares. Brilliant
3/4 mile - 1.5 is my personal guestamet, I don't think that it would make 2 miles. Cool & ingenious idea, just not very practical. Nice to know that these things are possible though. Cool video 😎😎😎😎😎👍
Wow great idea. You could fit a other drill to the front wheel.
For what?
@@8BERZERKER8 awd
ive seen this done at least 6 times before and this is the best by a mile and the easiest, and some others you cant pedal only the drill powers it, and yes the large cog will shark fin in a while but most don't use it just the smaller cog and bike parts are cheap if not free on council pickups,
what is a council pickup
@@snorttroll4379my guess is "the local dump". free bikes.
Imagine shifting that, must be fun
Una preguntita.
Si me quedo sin batería del taladro?
Me. Tengo que cargar la bici al hombro. Je je,je.
Very cool, simple tech. Love it. All you need is a rucksack full of drill batteries. How far would one charge take you?
across the street and after changing the battery on the next street the tiny motor goes up in smoke..
@@samsunggalaxytaba3858 its a reducer motor but the battery would explode first
@@mr.engineear0987 i've never heard of a "reducer" motor used in a handdrill.. it's likely a brushed or brushless motor used in one of those.. and i have had one catch smoke while using it during drilling.
excelente. que autonomia tienes esas baterias en Horas o en Km?? Buen trabajo!!!
Just a question, is it difficult to drive? Or does it just feel like a normal bike. Coz i think it might be hard to control the speed
Hello ; hey man how fast are you riding this bike ? is it km/h or mph ?
I think it’s the gear ratio is wrong what do u think 🤔
And y did u cut off the other crank arm? Where is your other foot supposed to go? I love the video thanks for a great idea I will post mine once I get it designed
Remember the ppl that hate or dislike aren’t True inventors
inventors make solutions
Still don’t know what the haters do lol 😝
You are great (:
There's no reason to remove the pedals
Идея хорошая ,но без защиты если нужно экстренное торможение опасно
how many other men are watching this and feeling stupid in comparison this guy is a genius, I wouldn't be surprised to find his Teslas grandson
I'm gonna say that's 33 clicks and not 33 mph.
33 clicks = 20.493 mph.
Not bad considering it just a little Dewalt cordless drill!
5 mile range per charge??? Did you use 1.5 or 2.0 ah batteries??? Are you familiar with Stanton, Inc? They make an interesting 2 to 1 gearbox for drill powered bike? Interesting stuff.
Thank you very much for inspiring me 🙏
Nice idea, but have fun changing the battery.
I think a 2 AH would last a decent amount of time. You could always put a 4 AH or a 5 AH on it.
Throttle was meant to be right handed. But since you built it, it's really your preference.
me: Mom, i want an e Bike.
mom: We have already e Bike at home.
**e Bike at home**
That would still be one dope ass e bike😂😂😂💯👌
Mala idea, como va a pedalear cuando se quede sin batería !!!
Un taladro instalado de esa forma se forza mucho y se quemará enseguida
Amazing how many people think this is a good idea. I guess if you have a spare drill you're not worried about burning up.
I LIKE IT ,I WANT MORE .
Bien.buena idea. Tambien puedes colocarle un par de barritas en el cuadro de la bici mas al frente asi no tienes los pies hacia atras y tienes mas apoyo.
Show de bola MAn !!!!!
Parabens pela feito e trabalho MAn !
Ai nem esquenta com algum comentarios DEPRECIATIVOS porque grandes inventores do MUNDO tambem foram DESACREDITADOS.
((((Maximo.Respeito))))👊
Valla porquería
This is also a good solution for a DIY Gokart for kids.
Muito bom o projeto..👏👏.O amigo só esqueceu onde colocar os pés!!!😂😂😂😂😂😂😂
Taki mały szczegół 😂😂
Perfecto! Alcancé a llegar al Oxxo, ida y vuelta, por unas chelas. Con una sola carga
Where do I find the silver piece that's goes on the front of the drill ⁵ that spin chain sprocket
Very clever indeed, what milage would a full battery give ?
Every thing is backwards the throttle on the left hand side and you have to twist it away from you no peddles and a battery that will take you down the road and maybe back if you’re lucky
thats a supercool video ...however id like to see what happens after a few kilometers
This dude taking his drill bike on the wrong side of the road into oncoming traffic not giving a fuck lmao
It is for short tracks only. The pedals are gone, so in the battery ends, you take walk and can´t go like by "normal" bike...
Or have multiple batteries
Взять пару аккумулятор в карман и можно куда угодно. Отличная идея
А двигатель что не будет греться? Как для покатушак идея не плохая но я думаю Шурик под постаянной нагрузкой долго не прослужит
@@dmitriymatskov9186 да там если по нашим дорогам да бандюрам то он отлетит и батареи не посадит.лол.
" i mean, your onto something your onto som.... 👁️👄👁️."
If you bring 15-20 spare drills with you, you will be probably doing 15-20 km.
Plastic gears and no cooling, exactly what you expect in an e-bike powertrain.
Nice masking, on a bile, with no one around 👏🏽👍🏽👌🏽
😂
Pretty neat
My guy just sawed some expensive stuff. Ima cry
Хватит на 2 минуты езды, а потом сгорит.
This DeWalt have 2000 RPM max. The palmic drill have 3250 RPM. We try with palmic drill.
wow but that leg position kills your balls after 20 min......no pedals!!hehe
how long does it last 10 minutes?😁
Pretty darn slick
Got a bike sitting and doing nothing. You're convincing me to commit many misdemeanors
Nice work! Good idea!
Шок! 30 - ку на дрели😂
Зачем же он велосипед то испортил?. ради прикола.
Для развития и мышления юнных мастеров самое то)канал с чудококоватым "Професором Протоном")
Amigo porque no intentamos hacer eso mismo en un carro 4x2 en las llantas posteriores! Para hacerle 4x4 obviamente con pequeña potencia.
You put the throttle on the wrong side which pissed me off more than I want to admit but nice build
Jaja el acelerador esta al reves por eso acelera para adelante
Clever ,aber etwas kompliziert ...!
Very clever stuff. Wonder if the motor out of an electric leaf blower or strimmer could be used in its place for more of a kick. Also, you put the throttle on the wrong side and backwards 😆😅🤣
I was thinking that, he would have to throttle forward.
Nice DIY E-bike
the poor man's e-bike
how long can the battery last ？
The battery will last longer than the motor so don't worry. The motor on the drill will burn out on the first day.
Nice idea 💡 and super install 👍
was that 31mph? or kph? and how long did the battery last?
Kph obviously.
Hi how long the battery takes?
FANTASTICO-ECCEZZINALE
Wow good job bro, I was expecting speed 60km
Идиот. Из велосипеда сделал мотоцикл, только что делать если аккумулятор сядет? Отталкиваться от земли ногами что ли типа беговела? В электро-велосипеде это и есть основное преимущество что можно на педалях ехать и на моторе и комбинированно.
А на какую погоду рассчитано это чудо? Только на летнюю и сухую? А дождь пойдет - надо зонт держать над шуруповертом, да смазку на звезды по новой намазывать.
Salu2 bro eres el mejor éxitos ❤🙏🇪🇨
grasias se bienen muchos videos
@@filipotv los estaré esperando éxitos mi pana
@@filipotv q autonomia tiene la bateria y asta cuantos kilos agusnta
That’s so god damn hilarious lol
Now let's see this other engineer to see his idea
The drill will overheat in a bit and stop working, good idea though
xD on a flat plane this will work but once the bike need more torque the drill will destroy it self also very high chance long use will catch the drill on fire
Do interfaces exist that allow for ebike BMS/motors to pull from one or more powertool batteries? That would be amazing.
If your gonna go and put a throttle on,you may as well but a motor too, instead of using a $200 drill.
Hey Michael have you seen my drill. MICHAEL WHAT THE FU...
This is Motor-Cycle!😀👍
how long you can drive on this 2ah battery?
I guess 5-10 minutes max
Запас хода 300м.
Херня все это на этом шуруповерте далеко не уедешь мотор сгорит
how to remove the crnakarm without cutting it of?
я на шосейном велосипеде педалями 55км/ч разгоняю без мотора ия не спортсмен)
It's cool, but I forsee hrs an hrs of tweaking the drill just right and ect. Here's where, actually whst i think is or could be the golden diy robo bike. Now it could be gas or battery..... chainsaw. Swich chains to something less cutty an moint the motor like a motorcycle. I actually startrd one yrs ago with my baby stihl an an antique Evans. Got the idea cuz it was firewood season. But dropped the idea after chopping my stuck big saw out with a hatchet.....
Good idea but not last long . Use Cordless drill for drill for drill only .
Not true.
Now, WHERE IS MY TOILET?
You lacked the portable charger to charge the battery because when the battery runs out how are you going to continue? If you didn't put the pedals back, what brilliant ideas
Блять, лайк! Лайк по жизни! Классно придумал червячную передачу! Но мне кажется будет сильный износ
Schnell kaputt
Приветствую. Идея отличная.
Siempre puedes confiar en un DeWalt
Es lo q digo en todos los videos. Si haces la fuersa donde uno tiene q jeneral fuersa para q sea velos es en los pedales no en las llantas
এই মটরের দাম কত টাকা করে ভাই
1:04 is it necessary to put on that gear? Cant you just sit on the cranckset and put on the drill?