Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
I have problem with my Audi q5 2008 steering is hard but when I start car strait away steering is good for like 5 to 10 seconds end then hard full time also have problem with headlight right side indicator working daytime light works but high beam and low beam not working and another think my fox light also right when I turn on fog light its flashing like 4 times and then just don't work. left side is ok no problem at all changed bulbs tested good 12v checked all fuses all locations don't see damaged wiring so far just don't know what to do next I use software ODIS as well same faults coming up maybe you have wattsup or messenger I can send some diagnostic results maybe you can help some how or give me direction. your videos are Amaizing and very helpful.
Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
I have the same system on my 2015 Audi A6 3.0 Where is the main fuse for the steering module? That's what I would like to check. I'll start looking on Google, but if you can point me in the right direction before I find it, thanks!
Still have this code and after erase it comes again : 1 Fault Found: 12291 - Energy Management Active U140B 00 [00001000] - - [New feature! Extended UDS fault detail is only supported by current gen. interfaces] Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 7 Fault Frequency: 2 Reset counter: 70 Mileage: 285872 km Date: 2024.06.02 Time: 00:57:53 Voltage terminal 30: 12.5 V Voltage terminal 15: 0.0 V Control Module temperature: 13 ∞C System status: Awake_Timer_active IN ESP_standstill flag: no standstill detected Engine running: OFF IN ZAS_Te_X: OFF Terminal 15 status via CAN: OFF Terminal 15 status: OFF Datenfeld: 1
Hello, good evening And in the case of having all the corresponding signals and power. Would everything indicate that the problem is in the Steering module?
Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
I have an Audi A6 2012. There is a sound coming from here when turning the steering wheel, but it is not heavy. I ask, does this mean that there is a malfunction that causes this sound, but the movement is not heavy?
I've had the power steering problem in my A6 three times it was so expensive everytime, they said it's because of water or rain something..please tell me how to avoid these water problem..or should I drive my car in rain?
needed your help, in my case , i have audi Q5 2012 v6. when i start my car my steering works well but whenever i take full turn its become hard and stay same until restart of my car. one local mechanic told may be i need reinstall of audi software or my steering module is gone that not easy to digest as my steering working good on start and works fine until i take take full turn.. any suggestion by you.. thanks and love from dubai
"Thank you so much for your kind words! I'm really glad you found my video valuable and enjoyed watching it. It's feedback like yours that keeps me motivated to continue creating content. Thanks again for your support!"
Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
I'm considering a purchase from the Audi Approved Plus team in India - it's an Audi Q3 2013 Premium Plus Diesel model. However, I've come across a few concerns: the vehicle has a steering box issue, lapsed insurance, and tyres that are about 50-60% worn. I'm particularly keen on understanding the implications of the steering box problem. Could you provide any insights or perhaps an estimate on the cost of a new steering box assembly for this model? Your guidance would be invaluable as I navigate this potential purchase.
I need your help I have a vw passat cc 2010 2.0 turbo it has 23k miles, i barely use it When it had like 22k miles the red steering sensor turned on and the steering was hard Had to replace all the power steering but the same problem is happening again Sometimes the light will turn red ( a steering in red ) and make a sound but i wait and it disappears and the steering becomes soft again I don’t know if i need to program it or re - program it or something. I also keep the old one because i think it’s in good condition and the mechanic just made me buy a new one They checked the car and everything seems good The wires look good Why is that sometimes it’s hard and gives me the fault code, i wait and then suddenly the fault code is gone I’m from Mexico I have heard of the reprogramming with vagcom I’m considerin in buying it Thank tou
I have code B200049 on my 2013 Audi A6. Steering is very hard and code says control module faulty. Can I replace the rack with the junk yard one without having to have it programmed?
Hi, after driving on a wet road, i got a redlight in the dash , no power steering and codes :U140900 , C10AD29. Can you help me understan if i need a j500 update ? 2022 audi sq5 sportback....
2015 Audi A6. Power steering does not work. Traction control does not work. Adaptive headlights do not work. Steering wheel buttons do not work. Paddle shifters/ cruise control do not work. All happened at once? Any ideas
Hello, I have an Audi A6 car, the steering box hit a stone and when the mechanic opened it and repair it back, now the steering is very hard in every direction, how to solve this problem, one light is on after that (Steering Fault) please help me. Maybe the power is offed. Best regards
Audi cars are defective 😂i own an A6 c7 s line 2.0 tdi uktra 2015 and it has the same power steering module failure. Wotthless low quality cars. Audi is the new 80s skoda 😂😂crappy cars with overpriced fees
One of the best videos I have seen in a long time...Thank you
Got a A7 with the same problem in my shop now,will check this in the morning
Thanks for watching
I just couldn't wait to watch part 2 because I know it'll be positive. Excellent job sir
Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
@@topmonkey6512 OK thanks
Thank you brother Mohammad. You nailed it brother
Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
The Goat of autosparks
ما شاء الله تبارك الله بارك الله فيك
ممكن تعمل مقطع عن فحص خطوط الكان
وخصوصا في السيارات الامريكيه والشفرلبت
I have problem with my Audi q5 2008 steering is hard but when I start car strait away steering is good for like 5 to 10 seconds end then hard full time also have problem with headlight right side indicator working daytime light works but high beam and low beam not working and another think my fox light also right when I turn on fog light its flashing like 4 times and then just don't work. left side is ok no problem at all changed bulbs tested good 12v checked all fuses all locations don't see damaged wiring so far just don't know what to do next I use software ODIS as well same faults coming up maybe you have wattsup or messenger I can send some diagnostic results maybe you can help some how or give me direction. your videos are Amaizing and very helpful.
13472281875
You are always the best.
I'm having the following dtc C10AD29 help please.
Motor position sensor.
A6 16.
This was a great post!
Thanks
Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
Does the model or anything need to be reprogrammed after? Thanks!
I have the same system on my 2015 Audi A6 3.0 Where is the main fuse for the steering module? That's what I would like to check. I'll start looking on Google, but if you can point me in the right direction before I find it, thanks!
Still have this code and after erase it comes again : 1 Fault Found:
12291 - Energy Management Active
U140B 00 [00001000] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 7
Fault Frequency: 2
Reset counter: 70
Mileage: 285872 km
Date: 2024.06.02
Time: 00:57:53
Voltage terminal 30: 12.5 V
Voltage terminal 15: 0.0 V
Control Module temperature: 13 ∞C
System status: Awake_Timer_active
IN ESP_standstill flag: no standstill detected
Engine running: OFF
IN ZAS_Te_X: OFF
Terminal 15 status via CAN: OFF
Terminal 15 status: OFF
Datenfeld: 1
Hello, good evening
And in the case of having all the corresponding signals and power.
Would everything indicate that the problem is in the Steering module?
Would you have the step by step programming of the module, sir?
Thank you very much for your very nice video is help me a lot good Luck my friend for your business god bless you
Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
Thank you i will see it now
you welcome
I have an Audi A6 2012. There is a sound coming from here when turning the steering wheel, but it is not heavy. I ask, does this mean that there is a malfunction that causes this sound, but the movement is not heavy?
loved your cap and hope merc appriciate it .. ha ha ha ha ha 😂😂😂😂😂
Thanks
I've had the power steering problem in my A6 three times it was so expensive everytime, they said it's because of water or rain something..please tell me how to avoid these water problem..or should I drive my car in rain?
needed your help, in my case , i have audi Q5 2012 v6. when i start my car my steering works well but whenever i take full turn its become hard and stay same until restart of my car. one local mechanic told may be i need reinstall of audi software or my steering module is gone that not easy to digest as my steering working good on start and works fine until i take take full turn..
any suggestion by you.. thanks and love from dubai
Diagnose the car and see what Code you have in the system then we can go from there
Just got the same car 2013 and have the same problem only had car a week.
So was the original problem the bad connection you discovered and not the steering module(s)?
yes
Good video brother
"Thank you so much for your kind words! I'm really glad you found my video valuable and enjoyed watching it. It's feedback like yours that keeps me motivated to continue creating content. Thanks again for your support!"
Exactly the same thing happened to me on an Opel Vectra 2006 power steering pump. We techies are also doctors... 😂
I know
Hi, here is a video of me programming Audi's power steering with a diagnostic device: ruclips.net/video/onVDrs7Lglw/видео.html, you can take a look, it might help you.
I'm considering a purchase from the Audi Approved Plus team in India - it's an Audi Q3 2013 Premium Plus Diesel model. However, I've come across a few concerns: the vehicle has a steering box issue, lapsed insurance, and tyres that are about 50-60% worn. I'm particularly keen on understanding the implications of the steering box problem. Could you provide any insights or perhaps an estimate on the cost of a new steering box assembly for this model? Your guidance would be invaluable as I navigate this potential purchase.
I may have the same problem,what’s your location ?
I need your help I have a vw passat cc 2010 2.0 turbo it has 23k miles, i barely use it
When it had like 22k miles the red steering sensor turned on and the steering was hard
Had to replace all the power steering but the same problem is happening again
Sometimes the light will turn red ( a steering in red ) and make a sound but i wait and it disappears and the steering becomes soft again
I don’t know if i need to program it or re - program it or something.
I also keep the old one because i think it’s in good condition and the mechanic just made me buy a new one
They checked the car and everything seems good
The wires look good
Why is that sometimes it’s hard and gives me the fault code, i wait and then suddenly the fault code is gone I’m from Mexico
I have heard of the reprogramming with vagcom I’m considerin in buying it
Thank tou
diagnose it and see what code you have firstly
@@BestCarFixes thanks for your answer sir
The error code that i got is 03375
I have code B200049 on my 2013 Audi A6. Steering is very hard and code says control module faulty. Can I replace the rack with the junk yard one without having to have it programmed?
Yes some times it need to code it and do steering angle relearn
Hi, after driving on a wet road, i got a redlight in the dash , no power steering and codes :U140900 , C10AD29.
Can you help me understan if i need a j500 update ?
2022 audi sq5 sportback....
this car must be under dealer warranty
@BestCarFixes it is ouside warranty bc of an accident.
Can you help?
Email ?
Whatsapp?
@BestCarFixes can Thinktool preform the software updat for the J500 ?
I believe he scratched a bump very hard.
2015 Audi A6. Power steering does not work. Traction control does not work. Adaptive headlights do not work. Steering wheel buttons do not work. Paddle shifters/ cruise control do not work. All happened at once? Any ideas
1- check if there is codes
most of the time could be clock spring
Do you have a shop in New York ?
Hello,
I have an Audi A6 car, the steering box hit a stone and when the mechanic opened it and repair it back, now the steering is very hard in every direction, how to solve this problem, one light is on after that (Steering Fault) please help me.
Maybe the power is offed.
Best regards
Try steerin angle sensor relean if is not working that means the box has to be replaced
Also see if there is a code in the system
I am in Morocco what’s the number of mustapha
212708074622
Hey I have a 2012 A7 and I’m getting a “Do Not Drive Vehicle Steering is Defective”
And the car is not starting
Pls Help!
Where are you located
In Tucker Ga
You have to show us wiring diagram. Before you begin to show us pin out.
Please you do a great job but you need to ameliorate your skill..
thank you for your advice i will
Bra ihave same problem I'm here at south Africa please help me if you're here at south Africa
sorry I'm at usa but you can ask
@@BestCarFixes thanks bra
Where do u work sir ? Can I have the Bussiness address .
Audi cars are defective 😂i own an A6 c7 s line 2.0 tdi uktra 2015 and it has the same power steering module failure. Wotthless low quality cars. Audi is the new 80s skoda 😂😂crappy cars with overpriced fees
You talk too much and take time to go to.the point. No disrespect.
Could u plz share with us the phone number of mr bilal in morroco