As a kid my dad had us beating the circuit boards apart separating the silver tacks and gold fillings apart best we could then he used sulfuric acid to get the gold. It was very hard work. Watching this bought made me cry
I was the very very firet one who sent these awesome company fine powder of my pulverized boards twice and we did analysis on the result. Their system works perfectly. I am doing smelting boards using lead right now but for copper smelting and refining method to get PMs their systems are top notch. This is Kevin Jones.
you betcha my friend, me and Slim have always like watching your set up and really like how you have an on site Recycler for Base metals and precious metals from PC boards. Real nice set up. Jeff and Slim
What he is saying is that Slim will probably try to sneak in there and run some of Jeff's ore for free...then head on over to the Saloon to watch the girls dance and pay them in nuggets.
I would think that a lot of the values are picked out with the magnet, such as gold plated pins and Crystal Oscillators. Also I would try to speed up the water in your Hydro Cyclone, I had the same problem on my copper wire set up so I made all the inputs and outputs flush to get the water spinning faster. Have a look at my video showing "how it works". Thanks for another great video and Love seeing all your different set ups.
I believe he said it was roughly 25-50 pounds of boards. He has stated in other comments that the set up can run about 200-400 pounds per hour and was around 85% gold recovered. The assay results video broke it down and figured there is roughly 4.5 Toz gold per ton. At today's rate, 11/07/20, that's about $8500 per ton, just of gold..
Word of advice ....you magnet that is removing steel etc.... is removing gold as most gold on electronic scrap is coated on Kolvar ( copper with nickel coating then the gold goes on the nickel ) nickel is magnetic !!!!
With metal as the end goal (as your say) how much of a dollar worth of metal is eaten by the process? Thats a lot of power, equipment abuse, and waste. How much is #1 and how much is #2 worth as is per dry oz?
This is a billion dollar idea, you should scale up and make the process completely autonomous from dumping boards all the way to sort the particles and melt them together into pure ore. Then hire engineers to make the process even more efficient.
Thanks for you question. This machine is not meant to separate the gold plating from the other metals. This machine is designed to remove the metals from the boards which can later be processed to remove the precious metals. We have tested the tailings/waste from the board grinder and currently we are recovering about 85% of the gold, 90% of the silver and other PMs and much higher percentages of base metals. We are working to improve our hydrocyclone design to get a higher recovery of the gold and other PMs. Thanks
@@mbmmllc Great points and excellent stats one just one part of a overall recovery system - the Table is the Rougher, Smelting will recover the remaining.
Cool video, very thorough explanation of the process. I have a question about the tailings, what do you do with it all, and have you experimented with re purposing it, for example, recycling the plastics into packaging material or remelting the fiberglass to make insulation or building materials?
+angryadrien Hello and thanks for your question. We have sent these off for analysis and hope to hear something back in the next few weeks. I will keep you posted when we hear something. Thanks
+Dumpster Marcus As of now I am not sure. The customer was going to have it analyzed and he said he would get back to me. I will let you know as soon as I hear what values he recovered. Thanks
This is the best and only way to do it if you want to make a profit. Do you process the material further by acid treatment, or do you sell it to a refiner?
Hi Andy. Actually in 1 ton of PCB at today's prices there is about $20,000 USD in metal value! This stuff will be the new ore mined in the future for sure!
Their profit is is mostly from customers who pay to have this done and or the RUclips monetization provided from this and other videos. So like and subscribe then hit the bell...if you don't feel like donating. Might be a couple ways to profit.
I would love to do this on a smaller scale at home, are there any mini hammer mills and shaker tables available out in the market? Urban Mining is the only type I can do now cause of kids, life and everyday needs. I know for sure if I hadn't got married I would be traveling the country prospecting. Thanks for the videos and info you provide.
Hi. We do have a smaller system that some of our clients are using in their small shop or garage. Please send us an email at MBMMLLC@gmail.com for more info. Thanks
We sell a small impact mill, can do 250 lbs. + an hour, real good on IC chips. $1,695. Use one ourselves. We do small scale but planning to up the volume.
+S Wall We don't offer this as a service, we manufacture and sell the equipment. For more info please email or call: 360-595-4445 or MBMMLLC@gmail.com Thanks
@@mbmmllc planning a trip out to see you guys this Sept. 2019. Look forward to seeing the set up and possibly running a sample. Will be in touch later in July or early August. Keep doing what you do.
Thank you for the comment. For questions please send us an email at info@mbmmllc.com or call +1-360-595-4445. You can also visit our website at www.mbmmllc.com We prefer to communicate through email so for any specific questions that need a response please email us! Thanks again for watching all our videos!
The irony is in 20 to 30 years the components on the boards will be worth far more intact than the gold they contain (see prices for 1970s microprocessors and memory chips). On the other hand he is doing collectors a favor by making such components less common.
Hi. It will really depend on the size of the hammer mill, screen size, material, etc. For boards through a system like this you are looking at something around 500-1000 pounds per hour or so. If you are interested in more details please send us an email at MBMMLLC@gmail.com or give us a call at 360-595-4445. Thanks
Thank you for your comment! If you would like more information on the cost of our products, you can email us at info@mbmmllc.com or call us at 360-595-4445. Thank you for watching!
That is a great question. People do lots of different stuff. Some people refine it themselves, others send it off to a refiner. There are lots of different ways to go about refining the material and it really depends on what you are after. I am working on a new video to show a way to refine the material and get your PM's and copper out. Stay tuned.
I've never understood why people used buckets of expensive dangerous chemicals & acids to process the entire raw Gold Recovery Material rather than small manually separated amounts. It makes recovery WAY more expensive than it needs to be. Even cheap car battery electrolysis effectively & quickly separates gold from base metal plating substrate on PC cards + pins.
+fuddrucker74 Those are great questions. It will really determine the types of boards your are running. They are quite varied depending on the type of board you are processing. Mother boards have somewhere around 3-5 oz gold, 15-30 oz silver, and about 500 lbs of copper per ton of boards. Thanks
+thibaud can lidth Yes our shaker table does separate palladium and platinum, the majority of both will go into the number one port and the remaining will go into the number two port.
Thank you for the comment. For questions about pricing or equipment please send us an email at info@mbmmllc.com or call +1-360-595-4445. You can also visit our website at www.mbmmllc.com Thanks for all your encouraging comments, great ideas, safety concerns, environmental concerns, and cost questions. We prefer to communicate through email so for any specific questions that need a response please email us! Thanks again for watching all our videos!
We did not conduct a assay on this particular test. It was to just demonstrate how our hammer mill and shaker table can process PCBs. Here is a link to the assay results we had done on a much larger sample. ruclips.net/video/ReOQ1uFvsZs/видео.html
Hello how are you , found on you tube Video que has equipment que grinding circuit boards and at the end of this process by separating the metals , including gold , i have a doubt in the equipment , this can Also be done with memory cards ram ? because I am chemist and I am purifying gold of These electronic waste and this equipment is really very good . I 'm from Brazil and so if there is any error in Inglês I apologize , thank you and look forward contact
Hello. Yes this can be done with memory cards and RAM. I see you have already send us an email so I will respond with more detail through email. Thanks
@@mbmmllc I liked your wet hammermill with the wet shaker table. You ever think about doing car batteries? Drain asid. Add LOTS of baking soda to the water. Seberate lead and plastic.
i have alot of scrap boards my kids and i separate on a smaller amount and thought about grinding them up and wondered if just do a burn off but dont know the dangers of doing that any ideas i have a small forge and can get to 3000 deg
You are losing most if not all of your precious metal recovery with this method. It will either be pulled out with the magnet because a lot of precious metals are plated or combined with magnetic metals, and your machine can't grind it down so fine that it separates plating or micro components that contain both precious metals and magnetic ones. Or it will be carried into your #1 and #2 buckets where it can't be separated any further, unless you use chemicals on your #1 and 2
Hi Bob. Thanks for your comment. The magnetic cross belt used in this video is not recommended for use with circuit boards. This is our recycling line and primarily used for separating ferrous and non-ferrous metals. I wanted to show the larger 24"x16" hammer mill and discharge conveyor as a pre-chopper for some of the larger circuit boards. You are also correct that this machine is not designed to remove the plated gold from the other metals. There is quite a bit of free gold that can be liberated from the chips and other components and recovered on the table, but most of the gold plating stays on the base metals. Notice at about 6:33 all the gold plated pins going into the #1 & #2 high grade buckets. The goal with this system is to concentrate and separate the metallics from the plastic and waste board materials. As you can see at the end of the video the results are almost 100% metal free from contamination. By screening and re-running the #1 on the table you can get a pretty clean gold product that can be melted down and sold directly. The remaining values in silver, copper, gold plating, etc. need to be sent off or refined in house to recover the rest of the metal values. Refiners will pay a much higher amount for these metallic fractions off the table than whole boards themselves. We have run several assay tests of the boards and waste material and have determined that we are actually recovering about 85% of the gold and silver values by using this method. We have found that mother boards have somewhere around 3-5 oz gold, 15-30 oz silver, and about 500 lbs of copper per ton of boards. Stay tuned for more vids. Thanks
"...not recommended for use with circuit boards." I'm seeing you putting MB and other type of circuit boards into your machine. And that magnetic separator, you are gonna get a lot of good and bad stuff picked up. The only best way to process circuit board is my hand. Otherwise, a lot of goodies gets into the trash.
Felippe, once you have concentrated the precious metals in the number one and two ports you will need to refine the concentrates yourself or send them off to a refiner to do it for you.
I think this way for recover precious metals is good, becouse is fast and dont use any chemicals materials. This process get 100% of precious metals? Congratulations! I would like to use this technology in my country. Thank you.
Former digital technology processed, broken down by a analog machine. I love it, quite poetic.
Haha, I never really thought of it that way, but you make a good point.
Gavin Helgeson I love that explanation!
great comment. reminds me of Parting of the sensory by modest mouse as a metaphic and the exposition as a plus..
NICE analogy
haha
That is, it turns out that do you think quantum computers will thresh only digital machines?)
As a kid my dad had us beating the circuit boards apart separating the silver tacks and gold fillings apart best we could then he used sulfuric acid to get the gold.
It was very hard work. Watching this bought made me cry
I was the very very firet one who sent these awesome company fine powder of my pulverized boards twice and we did analysis on the result. Their system works perfectly. I am doing smelting boards using lead right now but for copper smelting and refining method to get PMs their systems are top notch. This is Kevin Jones.
Thanks Kevin. Hope you are doing well.
Excruciatingly satisfying to watch this.
Thank you for your comment and for watching our videos!
fantastic set up.
Jeff and Slim
+Ask Jeff Williams Thanks! Always great to get kudos from Jeff and Slim!
you betcha my friend, me and Slim have always like watching your set up and really like how you have an on site Recycler for Base metals and precious metals from PC boards. Real nice set up.
Jeff and Slim
you betcha my friend.
Jeff and Slim
What he is saying is that Slim will probably try to sneak in there and run some of Jeff's ore for free...then head on over to the Saloon to watch the girls dance and pay them in nuggets.
that is slick as snot on a door knob!
The cyclone separator is pretty neat
Thanks!
Good job
Hi I just discovered this video july 29 2019. Great work.
Thank you for your comment and for watching our videos!
Hi there! All right, you use the magnetic separation, however lot of pins gold plated are magnetic too. So, how did you solve this issue?
Nice. Well done. Beautiful machine and we'll put together video.
thank you for sending Delano Fitzroy Selver owner of Growstars true organics.
Needs to be GROUND UP MORE !
I would think that a lot of the values are picked out with the magnet, such as gold plated pins and Crystal Oscillators.
Also I would try to speed up the water in your Hydro Cyclone, I had the same problem on my copper wire set up so I made all the inputs and outputs flush to get the water spinning faster. Have a look at my video showing "how it works".
Thanks for another great video and Love seeing all your different set ups.
+corsagafa Thanks for the tips! I will check out your video. Thanks
I would not mind having a job like this lol
You could do bulk assays on the #1 and 2 buckets. Easy. Nice setup.
What weight of pcbs gives a viable return on capital invested ,what percentage of gold do you get from the boards processed ? Great informative video.
I believe he said it was roughly 25-50 pounds of boards. He has stated in other comments that the set up can run about 200-400 pounds per hour and was around 85% gold recovered. The assay results video broke it down and figured there is roughly 4.5 Toz gold per ton. At today's rate, 11/07/20, that's about $8500 per ton, just of gold..
I love this stuff guys, keep up the good work.
Great! Thanks!
Nice treasure
SO how much gold did you get out of that run??
Can't remember, it was a long time ago :)
BAZXXXBEST shhhhhhhh, grownups are talking.
@@TaintedMojo LOL!
@BAZXXXBEST THAT IS RUDE! and NOT NECESSARY.
@BAZXXXBEST wow dude, I was just going to ask you how much gold you recovered 4 years ago, but I guess we already know..
Word of advice ....you magnet that is removing steel etc.... is removing gold as most gold on electronic scrap is coated on Kolvar ( copper with nickel coating then the gold goes on the nickel ) nickel is magnetic !!!!
With metal as the end goal (as your say) how much of a dollar worth of metal is eaten by the process? Thats a lot of power, equipment abuse, and waste. How much is #1 and how much is #2 worth as is per dry oz?
thats what i would like to know as well .......
This is a billion dollar idea, you should scale up and make the process completely autonomous from dumping boards all the way to sort the particles and melt them together into pure ore. Then hire engineers to make the process even more efficient.
Very Great Insight..
I like that Business Mindset!
Post necro: How do you separate out the metals now that they are fine powder but condensed together?
I'm not convinced of the ability of this device to remove surface gold from tracks. Have you chemically tested your tailings to check your efficiency?
Thanks for you question. This machine is not meant to separate the gold plating from the other metals. This machine is designed to remove the metals from the boards which can later be processed to remove the precious metals. We have tested the tailings/waste from the board grinder and currently we are recovering about 85% of the gold, 90% of the silver and other PMs and much higher percentages of base metals. We are working to improve our hydrocyclone design to get a higher recovery of the gold and other PMs. Thanks
Id like to see your testing and waste - uh use or disposal
@@mbmmllc Great points and excellent stats one just one part of a overall recovery system - the Table is the Rougher, Smelting will recover the remaining.
@@mbmmllc price?
Awesome thumbs up my friends
Great! Thanks!
Cool video, very thorough explanation of the process. I have a question about the tailings, what do you do with it all, and have you experimented with re purposing it, for example, recycling the plastics into packaging material or remelting the fiberglass to make insulation or building materials?
Hi. All great ideas. We haven't done much with the tailings yet, but we are always looking for ways to re use things. Thanks
will you be posting the results of the analysis?
I'm curious to know what volume of metals you got from the run.
thx
+angryadrien Hello and thanks for your question. We have sent these off for analysis and hope to hear something back in the next few weeks. I will keep you posted when we hear something. Thanks
Have you posted the results yet?
@@angryadrien Not yet.
@@filonin2 bummer
that really cool.. from that load he did what do you think the value of everything is in the buckets??
+Dumpster Marcus As of now I am not sure. The customer was going to have it analyzed and he said he would get back to me. I will let you know as soon as I hear what values he recovered. Thanks
This is the best and only way to do it if you want to make a profit. Do you process the material further by acid treatment, or do you sell it to a refiner?
Ideally sell to a refiner
good stuff guys
Класс за обзор и подписка на канал!
Thanks!
you should really use gloves so you dont get any metal or arsnic and cyanide poisoning
Baah! It keeps the liver occupied.
How in the world do you get more out of the system than the electricity used to process these materials? Excellent work!
Hi Andy. Actually in 1 ton of PCB at today's prices there is about $20,000 USD in metal value! This stuff will be the new ore mined in the future for sure!
Their profit is is mostly from customers who pay to have this done and or the RUclips monetization provided from this and other videos. So like and subscribe then hit the bell...if you don't feel like donating.
Might be a couple ways to profit.
I would love to do this on a smaller scale at home, are there any mini hammer mills and shaker tables available out in the market? Urban Mining is the only type I can do now cause of kids, life and everyday needs. I know for sure if I hadn't got married I would be traveling the country prospecting. Thanks for the videos and info you provide.
Hi. We do have a smaller system that some of our clients are using in their small shop or garage. Please send us an email at MBMMLLC@gmail.com for more info. Thanks
We sell a small impact mill, can do 250 lbs. + an hour, real good on IC chips. $1,695. Use one ourselves. We do small scale but planning to up the volume.
@@maranti34b can you provide a link? I'm really interested
I'm intrigued
Great! Thanks!
what sort of metal recovery per ton of board are you getting.
about 3 oz gold, 15 oz silver, and 30% copper by weight
Excelente
Great! Thanks!
How much do you charge to run ic and flat pack chips?
Where do you send your recovered metals to be refined?
Make sure hammers are balanced set. Vibration is bad if not. Use 1 at work myself
Great, thanks for the tip!
Do you offer this as a service? How much a hour, how many boards est. a hour?
+S Wall We don't offer this as a service, we manufacture and sell the equipment. For more info please email or call: 360-595-4445 or MBMMLLC@gmail.com Thanks
Got any numbers? Gold pr tonn of board maybe? Or pr pound of that nr 1 slurry?
Get about 3.5 oz/ton gold and around 30% copper
How do you get the precious metals out of the number one?
I love your Videos, keep Thema coming :)
+Jan M. Thanks! More on the way...
@@mbmmllc Sir i wont to know detect,,, for youe machine,,
zahidmd605@gmail
for the video, how many boards did you end up grinding up?
We ran around 25-50 pounds of boards for this video.
@@mbmmllc planning a trip out to see you guys this Sept. 2019. Look forward to seeing the set up and possibly running a sample. Will be in touch later in July or early August. Keep doing what you do.
when a lot of raw materials, and the loss is not terrible. It's terrible, half of the scrap.
Thanks for watching
How much material do you need to make a run? How much do you charge to make a run?
We dont custom process, just sell machinery
So I have 7 55 gallon drums full of motherboards if I bring them to you you can’t run them for me I’ll pay or split what we get
Thank you for the comment. For questions please send us an email at info@mbmmllc.com or call +1-360-595-4445. You can also visit our website at www.mbmmllc.com We prefer to communicate through email so for any specific questions that need a response please email us! Thanks again for watching all our videos!
The irony is in 20 to 30 years the components on the boards will be worth far more intact than the gold they contain (see prices for 1970s microprocessors and memory chips). On the other hand he is doing collectors a favor by making such components less common.
Thanks for the comment. Right now its just worth the metals. Thanks
Grat work!!
That's a beautiful toy you got there! How much can you grind per hour?
Hi. It will really depend on the size of the hammer mill, screen size, material, etc. For boards through a system like this you are looking at something around 500-1000 pounds per hour or so. If you are interested in more details please send us an email at MBMMLLC@gmail.com or give us a call at 360-595-4445. Thanks
If love to do this some day. Maybe as a hobby.
Thank you for your comment! If you would like more information on the cost of our products, you can email us at info@mbmmllc.com or call us at 360-595-4445. Thank you for watching!
Oh cool set up. So how do you process the stuff at the end to separate the metals?
That is a great question. People do lots of different stuff. Some people refine it themselves, others send it off to a refiner. There are lots of different ways to go about refining the material and it really depends on what you are after. I am working on a new video to show a way to refine the material and get your PM's and copper out. Stay tuned.
I've never understood why people used buckets of expensive dangerous chemicals & acids to process the entire raw Gold Recovery Material rather than small manually separated amounts. It makes recovery WAY more expensive than it needs to be. Even cheap car battery electrolysis effectively & quickly separates gold from base metal plating substrate on PC cards + pins.
Can it separate glass and plastic too? How profitable is it to run the machine for only the metals?
Yes it can do both. The metals are where the money is though
Have yet to see someone that uses a simple, mediumsized, ballmill and then separates the plastic from the metal and proceeds with the chemical stuff.
how many pounds of boards do you run per oz. retrieved? what is your operating costs per oz. of gold retrieved? thank you.
+fuddrucker74 Those are great questions. It will really determine the types of boards your are running. They are quite varied depending on the type of board you are processing. Mother boards have somewhere around 3-5 oz gold, 15-30 oz silver, and about 500 lbs of copper per ton of boards. Thanks
+mbmmllc ok, thank you. I needed some context to wrap my head around. thank you for the quick reply.
hello, thanx for the video , do you also separate palladium and platinum ?, greetings
+thibaud can lidth Yes our shaker table does separate palladium and platinum, the majority of both will go into the number one port and the remaining will go into the number two port.
oke thanx! keep up the good work guys!
Do you charge for this service?
Can you I have this machine??. It's very nice machine you good man
What is a price that all setup in indian currency
How about in pesos ? LOL
Thank you for the comment. For questions about pricing or equipment please send us an email at info@mbmmllc.com or call +1-360-595-4445. You can also visit our website at www.mbmmllc.com Thanks for all your encouraging comments, great ideas, safety concerns, environmental concerns, and cost questions. We prefer to communicate through email so for any specific questions that need a response please email us! Thanks again for watching all our videos!
How much cost for this mechines
👍
im only asking? hrr in thr philippines day also a nuggets.because im so very interisting what im see
how much gold did you pull from that run ?
We did not conduct a assay on this particular test. It was to just demonstrate how our hammer mill and shaker table can process PCBs. Here is a link to the assay results we had done on a much larger sample. ruclips.net/video/ReOQ1uFvsZs/видео.html
Could I ship you circuit boards to put through your shaker to ship back to me.
gold recovery from shaking table is how much successful?
Hi. I see you sent an email to us. I will respond with all the info to you shortly. Thanks for your interest
I wood like to know more
please give a advise about ds vedio
Wow amazing machine. I want to get it how ??
Please email us at info@mbmmllc.com for more information.
hlw sir,
Can you provide the total cost for such industry ? TIA
Hi +Ovee Tofayel, please email us at info@mbmmllc.com for the pricing of this machine and our other equipment.
my mail ove.cep@gmail.com; can you send me on this sir
Hello how are you , found on you tube Video que has equipment que grinding circuit boards and at the end of this process by separating the metals , including gold , i have a doubt in the equipment , this can Also be done with memory cards ram ? because I am chemist and I am purifying gold of These electronic waste and this equipment is really very good . I 'm from Brazil and so if there is any error in Inglês I apologize , thank you and look forward contact
Hello. Yes this can be done with memory cards and RAM. I see you have already send us an email so I will respond with more detail through email. Thanks
They take only the free gold. The fact that the plastic goes in the garbage. Hydrochloridebuy need a large volume.
Hello how are you, we talked a few months ago, would you have facebook so we can chat, thank you
facebook.com/ouroprata.gold.5
Hummm don't the mag belt get the gold plated pins and them lil steel fockers with silver in them . ??
Great, thanks for the tip!
@@mbmmllc I liked your wet hammermill with the wet shaker table. You ever think about doing car batteries? Drain asid. Add LOTS of baking soda to the water. Seberate lead and plastic.
oh yes
Thank you for your comment and for watching our videos!
Imagine the smell
Not great
i have alot of scrap boards my kids and i separate on a smaller amount and thought about grinding them up and wondered if just do a burn off but dont know the dangers of doing that any ideas i have a small forge and can get to 3000 deg
Burning is not a good solution, probably just sell them on boardsort.com or something
I hadssort n use wire cutters . sort out plastic from gold.
День добрый ребята А как вы ПМГ собераете с кирамики и мелких смд Палладий рутений платину серебро
You are losing most if not all of your precious metal recovery with this method. It will either be pulled out with the magnet because a lot of precious metals are plated or combined with magnetic metals, and your machine can't grind it down so fine that it separates plating or micro components that contain both precious metals and magnetic ones. Or it will be carried into your #1 and #2 buckets where it can't be separated any further, unless you use chemicals on your #1 and 2
Hi Bob. Thanks for your comment. The magnetic cross belt used in this video is not recommended for use with circuit boards. This is our recycling line and primarily used for separating ferrous and non-ferrous metals. I wanted to show the larger 24"x16" hammer mill and discharge conveyor as a pre-chopper for some of the larger circuit boards.
You are also correct that this machine is not designed to remove the plated gold from the other metals. There is quite a bit of free gold that can be liberated from the chips and other components and recovered on the table, but most of the gold plating stays on the base metals. Notice at about 6:33 all the gold plated pins going into the #1 & #2 high grade buckets.
The goal with this system is to concentrate and separate the metallics from the plastic and waste board materials. As you can see at the end of the video the results are almost 100% metal free from contamination. By screening and re-running the #1 on the table you can get a pretty clean gold product that can be melted down and sold directly. The remaining values in silver, copper, gold plating, etc. need to be sent off or refined in house to recover the rest of the metal values. Refiners will pay a much higher amount for these metallic fractions off the table than whole boards themselves.
We have run several assay tests of the boards and waste material and have determined that we are actually recovering about 85% of the gold and silver values by using this method. We have found that mother boards have somewhere around 3-5 oz gold, 15-30 oz silver, and about 500 lbs of copper per ton of boards. Stay tuned for more vids. Thanks
"...not recommended for use with circuit boards." I'm seeing you putting MB and other type of circuit boards into your machine. And that magnetic separator, you are gonna get a lot of good and bad stuff picked up. The only best way to process circuit board is my hand. Otherwise, a lot of goodies gets into the trash.
This hurts me
Thank you for your comment and for watching our videos!
How do to separete the precious metals of the end?
Felippe, once you have concentrated the precious metals in the number one and two ports you will need to refine the concentrates yourself or send them off to a refiner to do it for you.
I think this way for recover precious metals is good, becouse is fast and dont use any chemicals materials. This process get 100% of precious metals? Congratulations! I would like to use this technology in my country. Thank you.
All those machinery pays itself off from all energy spent? It looks like too few.
En español se puede
Is not mining is recycling
Yeah, but catchy😂
Cyberpunk
Thank you for your comment and for watching our videos!
No way would I run my stuff my hoard my cash of e waste through that piece of garbage designed to rob people of their gold no fking way man
Thank you for your comment and for watching our videos!
Fabbo ..😁
Thank you for your comment and for watching our videos!
Yep tons of views and no results no gold, pardon but you are rude you have wasted my time.
Thanks for watching!
halp me
Thanks for watching! Make sure to watch out for our next video!
Do you offer this as a service? How much a hour, how many boards est. a hour?
What is this price in India set up
Please send us an email at info@mbmmllc.com or give us a call at 360-595-4445. Thanks
Do you offer this as a service? How much a hour, how many boards est. a hour?