Where did you place it on the xj? Currently my hydroassist gearbox/resevoir are blocking me from fitting the stock air box in. Hoping this is a better option then the cone im using
I like the idea of opening up more space in the engine bay where the air box is deleted. Makes more room for aftermarket components.....air compressor, onboard welder, inverter, blender.....
I installed my dishwasher there, using a pto from the engine, water from the wipers. Clean yo shit in no time. You ever seen a 4k rpm, 180hp, 4.0l washer clean a T shirt?
Instead of putting the intake into the cowl, just move / add onto the stock intake so a 3" duct to in front of the radiator. Lots of cold air out in front of the radiator.. cowl inlet pumps engine noise into the cab.
a 20C drop in air temp result's in about 7 or 8% denser air i think? I'm not sure it's going to make a big difference in power by itself. I did a similar thing for my XJ, it was more to raise the intake a bit though. With one of these you don't have to worry about ingesting water until it's over your hood, and it doesn't look poser like a snorkel does, and it doesn't catch branch's and shit.
Caveat to just doing the intake mod to see changes in power. If you live in a hot sunny environment, and/or if you spend more time in slower traffic, it will probably make more of a difference. The colder it is and the faster you drive the less of a difference you will see in temperature as the under hood components can't get and stay hot as easily
Great video, Nate. Cool product. Would be interesting to see the difference in temps without the wrap. Not to say one shouldn't use the wrap, but the kit doesn't come with it.
Hey Nate! You told me to watch this when you saw my filter sitting on the throttle body on the trail. Gotta say I'm impressed with the difference in temps. I'm gonna have to try something like this. Also I like that you made it clear that this mod is not a huge boost in power alone. Combined with exhaust it makes a night and day difference though. Thanks for the sweet content! Hope to wheel with ya again!
Just put one in my XJ. It is awesome. I now have room for a second battery, too. The unit sounds great and allows me a little more wiggle room when fording these Florida swamps.
Its number one on the "most rewarding things I've ever done" list. I did it 100% myself, didn't buy a pre-built stroker, and it is SO worth it. Tuned and Dyno'd at 321hp, and 490ft/lbs. Its funny pulling up to a honda that thinks he's all that. leave him standing in his tracks picking his jaw up off the ground that a lifted, armored jeep can beat him in a street race. I just need to find the time to mount my supercharger....
have this kits on my 95 xj works amazing!! been there many puddles over my 33in tires spraying water all over and no issues with water getting in. have even dropped the whole front end into a mud hole water up past my headlights and never sucked water in works great! also great seeing actual test with it
Douglas Hefner I've been contacted by a bunch of people who love this Intake! I wanted to show real world data that reflects the results people are getting in the real world! Glad to hear you enjoyed the video
I very much did!! it also works great as a snorkel as I said above as long as your not trying to get water over your hood lol. eliminates having a giant snorkel sticking off your driver or passenger side that can get snagged on tress and such.
Oh, I know it :) I've got it too. My family (currently) has 5 VWs in the "stable", and I've used it on all of them for various things. That's not even counting the previous 5-10 VWs we've owned and used it with.
Did this on my ZJ and love it. I'd like to add a drain channel but it sits right behind the computer so you cannot go forward and going down takes you into the cabin. Driven through a few heavy down pours and no issues yet. The prefilter is supposed to help some water separation supposedly. Had to get a throttle body spacer to make the stock rubber 90 work with the PVC. Lastly I cut the black plastic so I don't have to remove the wipers when I clean the filter. Great mod!
I think I would fab a small sheet metal baffle that sits just above the filter to shed water coming in from the top, make it fasten to the two upper scews holding it to the cowl. It wouldn't inhibit airflow and it would stop water from hitting the filter and potentially getting sucked in. I think the drains will take care of the rest.
I see 150-180 deg F intake air during the AZ summers here, and acceleration is sluggish, even with my appropriately geared 4.0 on 31s and 3.73 gears. Also, I have a 99, so the intake temp sensor is in a different spot and I think this causes the temps to be much higher due to heat soak from the exhaust manifold.
I've got a decent size cam, header, and a couple other mods and I've had best luck with my snorkel for sure. This is a nice setup too if you can keep the rain, snow, and/or ice out. With a snorkel, you can turn the intake backwards to keep out heavy rain and dust as you drive.
I’ve been looking at something like this for my LJ. I live, drive and wheel in very hot climates. In July my IAT was near 170•f while sitting in traffic!!! Having said that, the THOR is a poor design. Crappy filter doesn’t clean air for shit, and the filter is a pain in the ass to get to. If you get water that high, it’s a downhill shot straight into the motor… The Hauk river raider is by far the best choice
Its offset from the cowl vent, as long as you have the cowl with a single vent in the middle. And with those single cowl vents you can get small scoops to help cover it better.
@@natebleepinjeep9564 drain holes already exist in that cavity, and any small amount of rain water that does get sucked in won't pose any issue for a engine
Nearly a year later my THOR TJ kit didn't have a vent hose either. But i have a whistle thanks for your vid now i know i shouldn't have one like i do and its likely vacuum (previous owner liked to unplug things that aren't working right )
I'd be curious to see how much clearance there is between the filter and the wiper arm linkage, at a glance it looked like there could be a potential clearance issue. Definitely clever and something I'll be looking into. Great video as always!
I saw Tim use one of these on his XJ. I wonder if this would be a good idea if you live in an area, like I do, that gets a decent amount of rain fall every year. I have a Chinese brand snorkel that I added to mine. Could get pretty wet.
I live in Virginia and at least for that part of the east coast goes, we get some pretty heavy rain when it does decide to fall. Just wondering if it would be worth it, given the chance it might get soaked.
have this kits on my 95 xj works amazing!! been there many puddles over my 33in tires spraying water all over and no issues with water getting in. have even dropped the whole front end into a mud hole water up past my headlights and never sucked water in works great! also great seeing actual test with it this is my comment I made earlier on this video. I have had mine for almost 4 or 5 months and still works great!! plus actually knowing that it truly does let the motor get better air is a huge plus!!
I have made my own version of the thor cowl intake for my xj, and I used a waterproof chemical on the prefilter to eliminate water getting to the cone filter. It is not 100% water proof but it still breaths and cone stays dry.
I like the stock air box it does a good job. I think you could do something like that to draw cold air directly into the air box I think that would make a large Improvement. Not as much as the THOR intake though.
A major problem with the stock box is that 'horn'...if you go through standing water fast enough, it can splash up into the engine bay and sheet against the underside of the hood due to the surface tension and that factory intake will suck it right in.
@@crumpb63 that's how I did my first snorkel. I cut the horn section off and opened the hole up and ran my snorkel Into the factory box and sealed it all up. It worked perfectly!
would have run the test twice personally I think just due to the fact that if you did the factory box right after the new one likely the engine was hotter in general, but if it had the new setup had same temp air the second time(after running factory with higher temp) it would be fairly conclusive at that point. Overall I really like this setup and had the idea myself prior to finding some companies providing the stuff, I think I will do it to my cherokee eventually. Really hoping to get some improvements to mpg even if it is very minor. Also the placement makes a lot of space in the engine bay which is a nice bonus... good place to hide my crack cocaine
Could have got stock numbers first, the installed the Thor,...I'd like to see a sealant applied between the plate and body....but really like to see numbers from comparison between the Thor and a snorkel style intake!
Are you worried that you would get rain or snow or other things in the in the intake since it's such an exposed area would rain affected a lot would do ring it sucked into the air and take from their. Would a rain downpour effect it will get sucked in to the engine. You made a very good point about Allen irritate and take should be on the outside. Very good video thank you
Nice work Nate. I have one thought (unsolicited). The header wrap is a good ideal BUT it will heat soak on a longer drive; what about a reflective insulated foil wrap that would reflect radiant heat from the engine compartment? Might be a good video..
The only downside that I can think of is that it would seriously effect the time it takes for my heater to start blowing hot air into my cab on these Michigan mornings. Product looks great though.
I just installed one of these on my LJ, did anyone that installed it have issues with the silicone hose being stupidly tight to get on the TB and the intake pipe? Also i got a rubber grommet of some sort and i have no idea what that was for since it was only one, and the instructions never mentioned it.
Matt Boelts I asked about the grommet, they said that some tjs and ljs came with a sensor in the intake tube. So you would drill a hole in the tube then slip the sensor and grommet in the hole.
Good to know, they might want to add that to the instructions. Also Mine came with a template so when I had to drill the hole for the filter it was easier.
I LOVE THIS DESIGN ,and I want one. first off I have. Question , on your factory air box you had the intake horn opening type tube coming out of box turned differently than I’ve ever saw one. Toward the middle of the engine. Mine is turned toward the fender. Would not that tube be taking in ALOT more heat turned that way toward middle of the motor where a lot of hot air is versus the tube turned the correct normal way toward the fender drawing in air AWAY from the motor and gettin air more so from grill right at the light. Does this not skew your test and basically make it void ? I ask this cause even before I saw this Thor model or the Spectre I had a similar idea of a CAI with a tube there. And I think these designs are only true way to get air anywhere close to right above ambient temperature. ( besides the factory first Gen Nissan Titan which has its intake come from inside front driver fender well) I’m just wandering what the numbers would be if that horn shaped intake tube suckin air into intake box was turned the correct way like all ours are ? Don’t take me wrong I’m not trying to be smart butt. Just trying to get accurate test results. I love the way you thermal wrap everything and that you told everyone that they need to add other mods to amplify this mod ( like exhaust ) . Anyway just thought I’d run that but you and wandering also is the tube in kit designed to vector air and smooth it out like K&N , injen, and others are. Thank you.
It does. Even more so if you add one of those cowls over top of that vent. But be sure to place the cowls opening facing the windshield and not the front of the hood 😎
Tim Daigle It's a program called Ross Tech or VCDS. It can do a lot with Volkswagen computers but can pretty much only do live data and DCT's with other obd2 computers.
Couple other things. Does this hamper the air flow received in cabin ? I’d it blocking air to the HVAC system and can you change filters by just pulling the tube out from the template inside engine or do you have to take the body part at windshield off each filter change ?
So now you need too remove the wipers and the panel every time you change or need too clean you're filter? And when it snows you got to remember to clean the snow off the opening? Not too mention the heavy rain on the filter as the engine is trying too suck in water.
I had this issue with my xj as well, when I bored my throttle(renix) there was a base bypass hole in the bore that I filled with epoxy(ISV took over anyway with a proper throttle plate setting) boom! noise I say was 90% quieter. I was shocked, no whistle unless cold and really giving it a thrashing. Something to look into maybe?
So as far as the oil cap can the tube be cut and flex hose added to get around the oil cap cause it looks like from the video that the tube is going directly over the oil cap, I'm really interested in installing this thor on my jeep but I need to know if it's gonna be better or make it more difficult
Nice, it's almost a snorkel too, and you can remove that huge air box from the engine bay and put other goodies in there like a dual battery setup or something. Any worries about when it is raining that it might suck some water into the engine?
Vinny Gullotta You're looking at it the same way I am! I think it's sweet that you can move the inlet of your intake above the hood Without adding a snorkel! And the added room under the hood is a huge bonus!
that's a feature :) In all seriousness, the jeep does that with the factory intake too. It just has a more muffled sound to it (sounds like a school bus to me)
gabriel wilson If you ever see one of the bleeping Jeep crew out in the wild come say Hi and We will give you one! I always keep a bunch of these on me
The best tho is when your helping your bro work on HIS rig and say. ‘I wanna do it’ and he says no because he doesn’t trust you...then proceeds to drill the 3” hole in the wrong spot...smirk😏
@@natebleepinjeep9564 I always try to support you guys. Y'all are the best channel/tv show to watch. Straight to the point and informative. Every other channel feels like they are just doing it for the money with 10 minutes of forced boring junk, here it feels like you are doing it for the viewers.
Wait a second. I think you just blew my mind....... You can datalog jeep's ECU with VCDS?!?!?!? Why the A.F. did I never even think to try connecting my vagcom cable to something other than my VW?!?!?
Lift the wiper up before you lift up, set the wiper arm on the tab you lifted up to get them off, leave it in that position, then reinstall and just do the opposite... what a hack, and remember I made that Jeep...
To remove the wipers. Fold the wiper up first, then the retaining tab will move freely
Highly recommend this extreme quality product, one of the best mods i have done to my xj
Where did you place it on the xj? Currently my hydroassist gearbox/resevoir are blocking me from fitting the stock air box in. Hoping this is a better option then the cone im using
I like the idea of opening up more space in the engine bay where the air box is deleted. Makes more room for aftermarket components.....air compressor, onboard welder, inverter, blender.....
Blender 😂😂😂😂
Hell some even put showers in there jeeps
Goodbye old filter box, hello blue top Optima 😎
I installed my dishwasher there, using a pto from the engine, water from the wipers. Clean yo shit in no time. You ever seen a 4k rpm, 180hp, 4.0l washer clean a T shirt?
Blender....mmmmm. margaritas.
Instead of putting the intake into the cowl, just move / add onto the stock intake so a 3" duct to in front of the radiator. Lots of cold air out in front of the radiator.. cowl inlet pumps engine noise into the cab.
Well I know my next mod to my Tj. This is really cool too because of all the space it free up under the hood.
I've never been a fan of CAI's except for increased throttle response. But 20+°C decrease in temps?
SOLD.
Great vid as always Nate. 🤙👍
BionicForester19 thank you!
a 20C drop in air temp result's in about 7 or 8% denser air i think? I'm not sure it's going to make a big difference in power by itself. I did a similar thing for my XJ, it was more to raise the intake a bit though. With one of these you don't have to worry about ingesting water until it's over your hood, and it doesn't look poser like a snorkel does, and it doesn't catch branch's and shit.
Any water issues?? Is the filter right under the opening?? Lools like its off to the side..
Caveat to just doing the intake mod to see changes in power. If you live in a hot sunny environment, and/or if you spend more time in slower traffic, it will probably make more of a difference. The colder it is and the faster you drive the less of a difference you will see in temperature as the under hood components can't get and stay hot as easily
Great video, Nate. Cool product. Would be interesting to see the difference in temps without the wrap. Not to say one shouldn't use the wrap, but the kit doesn't come with it.
Hey Nate! You told me to watch this when you saw my filter sitting on the throttle body on the trail. Gotta say I'm impressed with the difference in temps. I'm gonna have to try something like this. Also I like that you made it clear that this mod is not a huge boost in power alone. Combined with exhaust it makes a night and day difference though. Thanks for the sweet content! Hope to wheel with ya again!
Just put one in my XJ. It is awesome. I now have room for a second battery, too. The unit sounds great and allows me a little more wiggle room when fording these Florida swamps.
I did a custom cowl intake on my XJ. That, combined with my 4.7 stroker, makes for an incredible ride. Doesn't suck any water either
TheLonelyFatTart Nice man! How do you like the stroker build? I've always been intrested In those
Its number one on the "most rewarding things I've ever done" list. I did it 100% myself, didn't buy a pre-built stroker, and it is SO worth it. Tuned and Dyno'd at 321hp, and 490ft/lbs. Its funny pulling up to a honda that thinks he's all that. leave him standing in his tracks picking his jaw up off the ground that a lifted, armored jeep can beat him in a street race. I just need to find the time to mount my supercharger....
have this kits on my 95 xj works amazing!! been there many puddles over my 33in tires spraying water all over and no issues with water getting in. have even dropped the whole front end into a mud hole water up past my headlights and never sucked water in works great! also great seeing actual test with it
Douglas Hefner I've been contacted by a bunch of people who love this Intake! I wanted to show real world data that reflects the results people are getting in the real world! Glad to hear you enjoyed the video
I very much did!! it also works great as a snorkel as I said above as long as your not trying to get water over your hood lol. eliminates having a giant snorkel sticking off your driver or passenger side that can get snagged on tress and such.
You left exposed metal where you cut.....I would go back and spray with a good bonding paint and then use some rubber coat to protect the edge.
I love the use of VCDS (Vag-Com) on a Jeep! :)
Sean Birkner it's a very valuable tool! I use it whenever I can
Oh, I know it :) I've got it too. My family (currently) has 5 VWs in the "stable", and I've used it on all of them for various things. That's not even counting the previous 5-10 VWs we've owned and used it with.
Did this on my ZJ and love it. I'd like to add a drain channel but it sits right behind the computer so you cannot go forward and going down takes you into the cabin. Driven through a few heavy down pours and no issues yet. The prefilter is supposed to help some water separation supposedly. Had to get a throttle body spacer to make the stock rubber 90 work with the PVC. Lastly I cut the black plastic so I don't have to remove the wipers when I clean the filter. Great mod!
I think I would fab a small sheet metal baffle that sits just above the filter to shed water coming in from the top, make it fasten to the two upper scews holding it to the cowl. It wouldn't inhibit airflow and it would stop water from hitting the filter and potentially getting sucked in. I think the drains will take care of the rest.
I see 150-180 deg F intake air during the AZ summers here, and acceleration is sluggish, even with my appropriately geared 4.0 on 31s and 3.73 gears. Also, I have a 99, so the intake temp sensor is in a different spot and I think this causes the temps to be much higher due to heat soak from the exhaust manifold.
I've got a decent size cam, header, and a couple other mods and I've had best luck with my snorkel for sure. This is a nice setup too if you can keep the rain, snow, and/or ice out. With a snorkel, you can turn the intake backwards to keep out heavy rain and dust as you drive.
Give the pcv it's own little filter and cap the intake tube. That's what I've done on every 4.0 I've owned.
That aluminum piping cools very quickly I would think with the header wrap it would hold hot air in rather than help cool intake Temps
While the aluminum cools very quickly, it will also heat very quickly. The wrap helps keep the engine bay from heating up the air in the pipe.
I’ve been looking at something like this for my LJ. I live, drive and wheel in very hot climates. In July my IAT was near 170•f while sitting in traffic!!! Having said that, the THOR is a poor design. Crappy filter doesn’t clean air for shit, and the filter is a pain in the ass to get to. If you get water that high, it’s a downhill shot straight into the motor…
The Hauk river raider is by far the best choice
More TJ vids would be awesome!
toolman I'm working on it! Lots more TJ content to come
I’m going to add a little scoop on top of the cowl air flow hole thingy to help get great airflow
Good setup actually. I wonder about in heavy rain? No chance of sucking in water?
It’s probably tried and true, but I can see how it might have problems in a torrential downpour.
Its offset from the cowl vent, as long as you have the cowl with a single vent in the middle. And with those single cowl vents you can get small scoops to help cover it better.
I'm not worried about it but we live in a place that rains 9 months out of the year! We will be good Guinea pigs!
@@natebleepinjeep9564 drain holes already exist in that cavity, and any small amount of rain water that does get sucked in won't pose any issue for a engine
animefreak5757 I couldn't agree more
Is the driver Tony Beets son from the show Gold Rush? Great videos guys. Best on youtube.
Lol I'm going have to give my brother a hard time about that!
Super slick .always a good video
I finally understand cold air intakes! Thanks!
Nearly a year later my THOR TJ kit didn't have a vent hose either.
But i have a whistle thanks for your vid now i know i shouldn't have one like i do and its likely vacuum (previous owner liked to unplug things that aren't working right )
I'd be curious to see how much clearance there is between the filter and the wiper arm linkage, at a glance it looked like there could be a potential clearance issue. Definitely clever and something I'll be looking into. Great video as always!
Don't think that will work on my CJ, but I definitely need one for the XJ. Thanks for the goog install video!
No prob George!
I saw Tim use one of these on his XJ. I wonder if this would be a good idea if you live in an area, like I do, that gets a decent amount of rain fall every year. I have a Chinese brand snorkel that I added to mine. Could get pretty wet.
It doesn't get much rainier than the PNW where this particular install took place.
I live in Virginia and at least for that part of the east coast goes, we get some pretty heavy rain when it does decide to fall. Just wondering if it would be worth it, given the chance it might get soaked.
have this kits on my 95 xj works amazing!! been there many puddles over my 33in tires spraying water all over and no issues with water getting in. have even dropped the whole front end into a mud hole water up past my headlights and never sucked water in works great! also great seeing actual test with it
this is my comment I made earlier on this video. I have had mine for almost 4 or 5 months and still works great!! plus actually knowing that it truly does let the motor get better air is a huge plus!!
@@MrMoxes One of those covers he talked about would solve that I'm pretty sure
Bummer when it comes time to clean the filter though
About to do my '02 TJ... I have the SPOD, older style, so that is going to also get in the way a bit.
I love the diesel rasp for the intro music
Tom D thanks brother!
Very cool idea. So no concern of rain water hitting the filter?
LOL!
I'm not concerned, especially when the jeep is moving. I wont get anymore water on it then the cold air intakes offered by any other manufacturer
I have made my own version of the thor cowl intake for my xj, and I used a waterproof chemical on the prefilter to eliminate water getting to the cone filter. It is not 100% water proof but it still breaths and cone stays dry.
Gonna do this on my XJ looks like it works great
Routine maintenance, cleaning the air filter. Step one remove the wiper arms, step two remove body panels, sounds like a winner in my book
I wanted to run my intake tube inside the cabin. You'll see the filter and hear it when you stomp on it
I like the stock air box it does a good job. I think you could do something like that to draw cold air directly into the air box I think that would make a large Improvement. Not as much as the THOR intake though.
A major problem with the stock box is that 'horn'...if you go through standing water fast enough, it can splash up into the engine bay and sheet against the underside of the hood due to the surface tension and that factory intake will suck it right in.
The air filter box would only pull air from the cowl not from inside the engine bay
@@crumpb63 that's how I did my first snorkel. I cut the horn section off and opened the hole up and ran my snorkel Into the factory box and sealed it all up. It worked perfectly!
I wonder what the difference with a snorkel air intake would be???
would have run the test twice personally I think just due to the fact that if you did the factory box right after the new one likely the engine was hotter in general, but if it had the new setup had same temp air the second time(after running factory with higher temp) it would be fairly conclusive at that point. Overall I really like this setup and had the idea myself prior to finding some companies providing the stuff, I think I will do it to my cherokee eventually. Really hoping to get some improvements to mpg even if it is very minor. Also the placement makes a lot of space in the engine bay which is a nice bonus... good place to hide my crack cocaine
Are you worried about rain/water being sucked in?
I think Tim has this on his XJ
Could have got stock numbers first, the installed the Thor,...I'd like to see a sealant applied between the plate and body....but really like to see numbers from comparison between the Thor and a snorkel style intake!
Are you worried that you would get rain or snow or other things in the in the intake since it's such an exposed area would rain affected a lot would do ring it sucked into the air and take from their. Would a rain downpour effect it will get sucked in to the engine. You made a very good point about Allen irritate and take should be on the outside. Very good video thank you
Nice work Nate. I have one thought (unsolicited). The header wrap is a good ideal BUT it will heat soak on a longer drive; what about a reflective insulated foil wrap that would reflect radiant heat from the engine compartment? Might be a good video..
Southern Engineering Thank you for the observation and suggestion! It might be worth further testing if I have the time!
I would of been cool if you did a iat reading with and w/o the exhaust wrap
The only downside that I can think of is that it would seriously effect the time it takes for my heater to start blowing hot air into my cab on these Michigan mornings. Product looks great though.
How cool does it help to put ins if the hood scoops over the vents. Especially if face it forward ?
I have run this type of setup but had to remove it due to it sucks to much water in the intake when it rains
I just installed one of these on my LJ, did anyone that installed it have issues with the silicone hose being stupidly tight to get on the TB and the intake pipe? Also i got a rubber grommet of some sort and i have no idea what that was for since it was only one, and the instructions never mentioned it.
Matt Boelts I asked about the grommet, they said that some tjs and ljs came with a sensor in the intake tube. So you would drill a hole in the tube then slip the sensor and grommet in the hole.
Good to know, they might want to add that to the instructions. Also Mine came with a template so when I had to drill the hole for the filter it was easier.
I LOVE THIS DESIGN ,and I want one. first off I have. Question , on your factory air box you had the intake horn opening type tube coming out of box turned differently than I’ve ever saw one. Toward the middle of the engine. Mine is turned toward the fender. Would not that tube be taking in ALOT more heat turned that way toward middle of the motor where a lot of hot air is versus the tube turned the correct normal way toward the fender drawing in air AWAY from the motor and gettin air more so from grill right at the light. Does this not skew your test and basically make it void ? I ask this cause even before I saw this Thor model or the Spectre I had a similar idea of a CAI with a tube there. And I think these designs are only true way to get air anywhere close to right above ambient temperature. ( besides the factory first Gen Nissan Titan which has its intake come from inside front driver fender well) I’m just wandering what the numbers would be if that horn shaped intake tube suckin air into intake box was turned the correct way like all ours are ? Don’t take me wrong I’m not trying to be smart butt. Just trying to get accurate test results. I love the way you thermal wrap everything and that you told everyone that they need to add other mods to amplify this mod ( like exhaust ) . Anyway just thought I’d run that but you and wandering also is the tube in kit designed to vector air and smooth it out like K&N , injen, and others are. Thank you.
Wonder if that area has negative pressure at high speed? Will it get the air requirement it needs? Nice clean install!
It does. Even more so if you add one of those cowls over top of that vent. But be sure to place the cowls opening facing the windshield and not the front of the hood 😎
Hello.
I have a 2005 Jeep Tj x.
It has an air Sensor on the tube.
Does it means that this kit is not gonna work for me??
What is the data logger you are using?
Tim Daigle It's a program called Ross Tech or VCDS. It can do a lot with Volkswagen computers but can pretty much only do live data and DCT's with other obd2 computers.
What about the mass air sensor , does it have a place for it ?
Couple other things. Does this hamper the air flow received in cabin ? I’d it blocking air to the HVAC system and can you change filters by just pulling the tube out from the template inside engine or do you have to take the body part at windshield off each filter change ?
So now you need too remove the wipers and the panel every time you change or need too clean you're filter? And when it snows you got to remember to clean the snow off the opening? Not too mention the heavy rain on the filter as the engine is trying too suck in water.
I installed one of these on my XJ and it added a ton of engine noise to my Cabin. I like the idea behind it but way too loud.
pra3t0rian I've heard the same thing about the xjs so I was suprised at how quiet the engine noise was in the tj! Very tolerable
It added a whistle to my ZJ but far from being too loud.
I had this issue with my xj as well, when I bored my throttle(renix) there was a base bypass hole in the bore that I filled with epoxy(ISV took over anyway with a proper throttle plate setting) boom! noise I say was 90% quieter. I was shocked, no whistle unless cold and really giving it a thrashing. Something to look into maybe?
damn you scarring me into not wanting to do it on my xj now... A bit of sucky noise is fine but my xj is already louder than I would like inside.
So as far as the oil cap can the tube be cut and flex hose added to get around the oil cap cause it looks like from the video that the tube is going directly over the oil cap, I'm really interested in installing this thor on my jeep but I need to know if it's gonna be better or make it more difficult
"Jeeps attempt at a pcv" I haven't laughed that hard in a while
Hell yeah nate good video man
Who said that ? Thanks!
for this intake do I have to worry about water?
ha ha I like the vw software on your lap top
James Beck I'm happy to see people can recognize VCDS through a blurry video !lol
that is a nice install but one thing what about snow and rain
That might be the cleanest engine bay I've ever seen ......😍🤗😍
Nice, it's almost a snorkel too, and you can remove that huge air box from the engine bay and put other goodies in there like a dual battery setup or something. Any worries about when it is raining that it might suck some water into the engine?
Vinny Gullotta You're looking at it the same way I am! I think it's sweet that you can move the inlet of your intake above the hood Without adding a snorkel! And the added room under the hood is a huge bonus!
what happens when you have to drive thru a heavy snow storm or cold start after a heavy snow storm and the vent gets plugged with snow?
The bleepinjeep discount code for the prefilter doesn’t work?
Not like the engine was already warm or anything when you put the factory intake back, I'm sure it affected it
Alright you talked me into it. You can use my comanche on your show to build up for more episodes! Diesel manche project.
wouldn't have made more sense to do the data on the old one before you took it off so you don't have to take the new one off again
Would this work on a '88 Comanche?
Four stroke gang!
I tried the discount code and it is saying "sorry, this coupon is not applicable to selected products". Is your guys code still valid?
Can I do that on a YJ
looks like in heavy rain it will suck water in
how do you get rid of the loud sound on start up?
that's a feature :)
In all seriousness, the jeep does that with the factory intake too. It just has a more muffled sound to it (sounds like a school bus to me)
should have moved the intake air temp sensor out of the manifold where it gets cooked by the header and into the intake
have you got any check engine light after the installation of this kind of filters?? i have a tj 2005
The next video u can do is how to install a CD/MP3 player in your brothers jeep. Geez he still has a tape player. Good vid.
When it rains, will the intake suck the water into it?
Also, does the PCU need to be programmed with this change?
Nope your MAF makes changes on intake air temp. Just think that every day is not the same temperature outside.
Hey, where does the filter line up with the grate in the cowl? Any concern about water coming through onto the filter?
Shuld put a catch can in the pcv line.
I have a home brew version on this on my xj
What kind of wrap did you use
Awesome video by the way
What happens when it rains? Or snows?
I like the name tag 👍
gabriel wilson If you ever see one of the bleeping Jeep crew out in the wild come say Hi and We will give you one! I always keep a bunch of these on me
Did you try your wipers. My filter is hitting the wiper arm when they turn on
You have not fit your kit properly .. sadly you may need to trim more away on the bottom for it to fit without hitting wipers
Hey bro, remember that time you drilled the 3” hole in the wrong spot on my Jeep...
The best tho is when your helping your bro work on HIS rig and say. ‘I wanna do it’ and he says no because he doesn’t trust you...then proceeds to drill
the 3” hole in the wrong spot...smirk😏
Eddymatch 14 lol
Will this work on a 88 xj limited?
Great video
roxas the rogue Thank you! A lot of work goes into these
@@natebleepinjeep9564 I always try to support you guys. Y'all are the best channel/tv show to watch. Straight to the point and informative. Every other channel feels like they are just doing it for the money with 10 minutes of forced boring junk, here it feels like you are doing it for the viewers.
roxas the rogue thanks so much man! That's a very positive review!
Would this fit / work with the 2.4l Powertech?
Nice. Is there any room for an intake from the front grill area?
Wait a second. I think you just blew my mind....... You can datalog jeep's ECU with VCDS?!?!?!? Why the A.F. did I never even think to try connecting my vagcom cable to something other than my VW?!?!?
just add a scoop on the intake to protect it from rain
What would you think about using this for cooler engine temp? My temp is fine but still curious.
No dude
Lift the wiper up before you lift up, set the wiper arm on the tab you lifted up to get them off, leave it in that position, then reinstall and just do the opposite... what a hack, and remember I made that Jeep...
And with a cowl scoop, hmmm
sscottphillips1973 my brother and I had the same thought!
Just put one on my yj, facing the windshield, there's you another debate topic, makes a difference in the flow inside the jeep
Man Bleepin was way better with this guy 🤣