2009 fx35 tesla radio px6 installation tips.

Поделиться
HTML-код
  • Опубликовано: 6 янв 2021
  • In this video..you can see which wire you need to connect from the harnesses included with the system....pay attention to the one you don't need to connect but it looks like I does and there is a plug to connect it to..but you don't need to connect. it is a 32 pin connector as I showed in the video..if you connect this conector you'll lose your 360 cameras and the ac controls from the screen..when I was referring to the 2 wires conector ..blue and pink I meant the air bag light conector ...i hope this help somebody...
  • ИгрыИгры

Комментарии • 16

  • @doctorjayjay576
    @doctorjayjay576 2 года назад +1

    Hi, how many input places Does your OEM stock unit, mine only 4, i saw some of them having much more.

  • @justinjohnson9258
    @justinjohnson9258 2 года назад +1

    Who you order your unit from and how long did it take? Have a 2012 Infiniti fx50

    • @lindin34
      @lindin34  2 года назад

      Mine from rhino....but you can also order it from Phoenix...about 3 weeks

  • @carterstone9511
    @carterstone9511 5 месяцев назад +1

    Do your review camera work I have the 360 camera and my camera don't work

    • @lindin34
      @lindin34  5 месяцев назад

      It works..360 front and back

    • @carterstone9511
      @carterstone9511 5 месяцев назад

      Mines don't and I have 360 camera

  • @carterstone9511
    @carterstone9511 Год назад

    Hi where does the canbus hooks up too I have the same radio

    • @lindin34
      @lindin34  Год назад

      The connector that connect to the can bus is part of the harness that comes with the unit

    • @lindin34
      @lindin34  Год назад

      The connector is white and it has about 20 wires..the only connector that'll fit the can bus

    • @carterstone9511
      @carterstone9511 Год назад

      @@lindin34 I did that like the canbus is connect too the unit itself but I can not find the wire that goes too it from the vehicle

    • @lindin34
      @lindin34  Год назад +1

      @Carter Stone once connected..it's wireless connected to the car..make sure ur settings are correct so the ac controls work..

    • @carterstone9511
      @carterstone9511 Год назад

      @@lindin34 thanks mane it work I went back and check the video it work as it should

  • @wmah5574
    @wmah5574 3 года назад

    I am installing the same unit. I have some further questions for you. Can I contact you via email?

    • @lindin34
      @lindin34  3 года назад

      What's the question..?...

    • @wmah5574
      @wmah5574 3 года назад

      @@lindin34 oI have BOSE , Nav and rear DVD system in my FX. These are the issues I have not been able to solve and hope you have:fix:
      1.Passenger air bag light blinks ....I can fix this if I plug the original light back in,,,do you have another solution
      2.I cannot get the rear seat DVD system to work
      3. Parking radar works when the OEM cameras are on but the display on the head does not show signals I would show you a picture but I cannot upload a picture here
      4.If you go into the console icon. There is a section that shows bose controls. I cannot use any of them
      Hope you can help

    • @lindin34
      @lindin34  3 года назад

      @@wmah5574 mine is the same when it comes to the Bose options..ou need to set the options before you remove the OEM head unit same thing with the intelligent key option..air bag light is still as I showed in the video..you need to plug in the OEM one..when it comes to the DVD system that I know it is supposed to be connected to the aux wires and video...for the back up camera make sure you got the back up yellow RCA and that the reverse brown wire is connected