AGT Uragan 2 full disassembly

Поделиться
HTML-код
  • Опубликовано: 13 дек 2024

Комментарии • 76

  • @Tony-o1b
    @Tony-o1b 3 месяца назад +1

    Very well covered and quite a nice rifle.

  • @bigchad2374
    @bigchad2374 2 года назад +2

    i love the fact your not trying to sell me a gun your just showing me what im going to get if i decide to buy one. one of the few well done 👍

  • @paulspeller968
    @paulspeller968 2 года назад +4

    absolutely awesome mate . gives me a bit of confidence to take a rifle apart because the steps you show are detailed and easy to follow i appreciate the time and effort you put into these videos my friend thank you 🙏

  • @steveblaylock8662
    @steveblaylock8662 2 года назад +2

    Great video and thank you for clearing up the trigger creep adjustment looking forward to your mods on this fantastic air rifle

    • @sub12airgunners
      @sub12airgunners  2 года назад

      Thanks much appreciated. Thanks for watching.

  • @dgg2412
    @dgg2412 2 года назад +1

    About time we saw this in parts Jake😉

    • @sub12airgunners
      @sub12airgunners  2 года назад

      Cheers mate, a whole 3 weeks before it came apart! Took us long enough. Thanks for watching.

  • @Jknox
    @Jknox 2 года назад +1

    I think I enjoy this as much as the actual shooting so look forward to further knowledge.

  • @redgum1340
    @redgum1340 2 года назад +2

    G'day, Super duper disassembly video. I truly liked the method you progressed with all info and no BS as many others do when they do stuff like this. The rifle looks seriously well manufactured. Does it shoot consistently? Good on ya mate.

    • @sub12airgunners
      @sub12airgunners  Год назад +1

      Yes it's very consistent it's a great gun thanks for watching

  • @SHShahab
    @SHShahab 5 месяцев назад

    Excellent video as ever ! Just 1 question : where is the breath hole of the main block on this gun? actually I mean where the breath hole on the reg casing ends to ?

  • @thommytom
    @thommytom 7 месяцев назад

    Very nice! Do you know the thread on the bottle ?

  • @iankay7481
    @iankay7481 Год назад

    After some advice if possible , I need to replace my pressure gauge on a mk1 uragan , would you know which size gauge and type of thread is needed in case I can't source an original agt one and have to go aftermarket , thanks

  • @monk1john
    @monk1john 2 года назад +2

    Well in enjoyed that

  • @ilijaristeski58699
    @ilijaristeski58699 9 месяцев назад

    Any idea how to repair valve leak on Uragan 2 in 30cal ? I change all the O-rings on the valve and the valve housing but i still have the same problem

  • @fabiofernandestirodepressa3847
    @fabiofernandestirodepressa3847 8 месяцев назад

    Olá.
    Qual a diferença entre a Uragan 2 e a Vulcam3?

  • @fabiofernandestirodepressa3847
    @fabiofernandestirodepressa3847 7 месяцев назад

    Olá.
    Essa alteração no martelo, e a remoção do limitador de curso não gerou um problema na disparadora?

  • @gazzad8257
    @gazzad8257 2 года назад +1

    Hi
    Love your video
    Is that work mat available to buy??

  • @ALIHADI-jk3ex
    @ALIHADI-jk3ex Год назад

    Hello, I want to ask about the internal valve of the gun. Has the spring been changed or modified, or is this the original valve from the factory?

    • @sub12airgunners
      @sub12airgunners  Год назад

      it's the standard valve 😁😁

    • @ALIHADI-jk3ex
      @ALIHADI-jk3ex Год назад

      @@sub12airgunners can you give me your number please ?

  • @brianfurth2839
    @brianfurth2839 Год назад

    Great video as usual, would you have any idea the size of the .25cal breech seal o ring please? cant find it anywhere. Many Thanks.

    • @sub12airgunners
      @sub12airgunners  Год назад

      6.5 x 1.5 at a guess i don't know for sure not been in a .25 👍

  • @jasongeorge3115
    @jasongeorge3115 Год назад

    Fantastic video, really helped me. Question though, there is an extra o ring in my valve stem that's not on yours? The o ring appears to serve no purpose, it sits on the valve stem forward of the sealing face, below the transfer port and there are no locating grooves for it. My worry is that this should live in the main body as there is no sealing o ring between the valve stem and the body on the hammer side. Have you seen this before?

  • @shadowshooter4224
    @shadowshooter4224 3 месяца назад

    Amazing video, really usefull. I just bought Uragan 2, but i need to know, what is the manometer thread size? thank you bro.👍👍

  • @sutana26
    @sutana26 2 года назад

    Interesting valve system, looks like using balance valve, i see small hole on valve stem at 20:17
    Is that hole are from delrin side?
    Hope you make video about that.
    Thank you..

  • @yullex3338
    @yullex3338 Год назад

    Hi all, I bought my Uragan2 6.35 barrel 700, they advised me to lap the barrel, can it give optimal results, or can it give negative results? thanks whoever answers me

  • @lisawood516
    @lisawood516 2 года назад

    Brilliant video., interesting valve set up!. 😊😊

  • @78primdahl
    @78primdahl Год назад

    How about the uragan. Prince? Is it a pain to get to the regulator because of the twin bottle adapter or is just as simple as the standard uragan?

    • @sub12airgunners
      @sub12airgunners  Год назад

      not had a look at the prince yet but it should be the same as the standard one

  • @mxtone
    @mxtone 2 года назад

    Great video as always. Just bought a Uragan 2 which is fantastic and this video will be a great help in the future

    • @sub12airgunners
      @sub12airgunners  2 года назад

      Cheers, they are a real nice rifle. Thanks for watching

  • @truthspeaker2062
    @truthspeaker2062 Год назад

    Did you change cha valve ? Because uragan 2 valve comes with one O ring while uragan 1 comes with 2 o rings in the valve

    • @BikeMole
      @BikeMole 2 месяца назад

      The one in the video is the older original valve. There is now a white Delrin one, which seals better and is available as an upgrade (still 1 o-ring though)

  • @shahriar907
    @shahriar907 2 года назад

    Could you please tell me the (red metal one) hex screw driver brand name?

  • @sonan7216
    @sonan7216 2 года назад

    Good morning, I have an rti prophet 2 that came out about 5 months ago, it has an assisted valve that does not seem to be a great success, with a few thousand shots it started to leak through the valve, I sent it to the dealer and they installed a one-way valve of different air ensuring a better result, if I had the opportunity to do a rewiew assembling and disassembling I would appreciate your opinions and advice, greetings and thanks.

  • @jfkenpoman1
    @jfkenpoman1 2 года назад

    Great video. Is there any chance you can do a disassembly video for the AGT vixen short. I have the .22 version and it also make quite a noise when firing.
    Keep up the good work
    Kind regards
    Jon in uk

    • @sub12airgunners
      @sub12airgunners  2 года назад

      Cheers, we don't have one at the moment but if we borrow one we will get a video done. Thanks for watching.

  • @Sae-fu5ch
    @Sae-fu5ch 2 года назад

    Yet again a truly awesome video which is invaluable to owners of said rifle👏
    these boys share there work 👌

  • @LIMITLESS144
    @LIMITLESS144 2 месяца назад

    How to transfer the air if the bottle is empty? 😢
    I cant doing that, because the air always coming out in the back of valve. 😢

    • @BikeMole
      @BikeMole 2 месяца назад

      Stand upright with barrel in air so gravity assists the valve closing. After checking unloaded, place thumb tightly over barrel to seal it and pump away. Once the pressure build in the barrel it pushes the valve closed and you're good to go. AGT now include a red barrel cap for this reason

  • @jindoisland
    @jindoisland 2 года назад

    Love your videos! If you ever get your hands on a BRK Ghost, it would be great to see it apart and get your thoughts on it. Thanks

    • @sub12airgunners
      @sub12airgunners  Год назад

      The Ghost is on the list and we will be getting one

  • @donspiteri6814
    @donspiteri6814 2 года назад

    Awesome Luke.

  • @MrIliff
    @MrIliff 2 года назад

    I wonder how much difference it is to the original Uragan the previous model. Great video.
    Build of these airguns looks superb. What do you think? Ah ha you said at the end!

    • @sub12airgunners
      @sub12airgunners  2 года назад +1

      Not had a Uragan 1 before so I don't really know, but from the looks of it the new one is just an improved version of the original. Thanks for watching.

    • @bakerg21
      @bakerg21 Год назад

      The new one is a total redesign. The only real similarity (apart from its overall AGT DNA) is it's outward appearance with the stock on.

  • @joelowery8827
    @joelowery8827 2 года назад

    I don’t know why every air gunner out there is not subscribed to your channel.

    • @sub12airgunners
      @sub12airgunners  Год назад

      That would be nice 😀 thanks for watching glad you like them

  • @MasonStormSunny
    @MasonStormSunny 2 года назад

    Sorry, is the sealing disk made of peek?

  • @lukeatkinson30
    @lukeatkinson30 2 года назад

    Fantastic video as always. Maybe you should consider designing your own air gun

    • @sub12airgunners
      @sub12airgunners  2 года назад

      Thanks, we will get round to it one day, its certainly something we will do, but its just finding the time at the moment. Thanks for watching

  • @uragan3471
    @uragan3471 Год назад

    Hello, please make a clip about making a silencer for the uragan gun, thank you

  • @ok-uo8ht
    @ok-uo8ht 2 года назад

    Disadvantages of the gun The sound of the hammer is very annoying while shooting, and also the air coming out of the bolt during shooting

  • @TurkishTinkerer
    @TurkishTinkerer 2 года назад

    The mini laser

  • @jeffhello1444
    @jeffhello1444 2 года назад

    Nice one 😁

  • @zan6169
    @zan6169 2 года назад

    Приветствую. Интересный аппарат. Всех благ.

  • @sspider9523
    @sspider9523 2 года назад

    Airmaks krait assembly please

  • @OriginalMarkyBoy
    @OriginalMarkyBoy 2 года назад

    👍🏽👍🏽👍🏽 Thanks Jake 😎✌🏼

  • @znate123
    @znate123 Год назад

    زر الأمان لايعمل ما الحل

  • @tikhonov65
    @tikhonov65 Год назад

    да не автомат калашникова, миллион болтов и винтов..