Building an RC Car to race Kevin Talbot
HTML-код
- Опубликовано: 8 сен 2024
- This is the New LC Racing PTG-1, a 1/10 Scale off Road Racing Buggy. This video is a build and shake down. Look out for Part 2 where i'll hopefully be racing Kevin Talbot.
More LC Racing: shop.lcracing....
UK Distributor: www.xfactoryrc....
Castle Copperhead Combo: alnk.to/ge1XOvZ
WFly Transmitter: www.aliexpress...
If you Disliked this video because you Dislike me... Click Here (Size up): s.click.aliexp...
Check out my Merch: tomleyrc.com/
If you enjoy the content please consider Supporting by Buying me a Coffee:
www.buymeacoff...
My Amazon RC Favourites: www.amazon.co....
Copyright Free Music:
www.epidemicso...
filmstro.com/?...
My RUclips Tool: www.tubebuddy....
Facebook: / tomleyrc
Instagram: / tomleyrc
Twitter: / tomleyrcgarage
Tomley RC © 2022 Tomley Media Ltd. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Tomley Media Ltd.
haha bring it on!!
Loser has to wear this T-Shirt: s.click.aliexpress.com/e/_DEW9FvH
Banggood special
@Tomley RC haha you best have it ready then!! 😂
@@KevinTalbotTV Yep.. got you a Medium 😅👌
He's all mouth Kev! 🤣
This Talbot x Tomley crossover episode is looking promising!
😎👌
A Budget challenge would be nice, too.
Buy an older used RC Car on Ebay for maximum 200 USD incl. Radio control and accu.
From one of the older manufacturers like tamiya,hpi etc.
And then make some speed challenge,time attack, bashing etc.
Not everyone has nearly unlimited founds.
I rebuild at the monent my old DF-01 Chassis was a lot of fun in my childhood.
We need more of that rally car in action ASAP!!
Yes
To fix the CVD dropping out change the bearing on the inside of the tire from 2mm ( i think it was 2mm stock ) to 2.5mm and it will push the CVD closer to the diff cup , i had the same problem on my wltoys car and that fixed it with ease .
A tip someone showed me back in the day was to cut a small piece of fuel tubing (from a nitro car) and use that to shim. Worked for me very well and pretty much a free fix.
@@mikesrccorner he's running cvds not dog bones mate so this bearing trick works perfect
Both tipps are really good you dont need to buy something to get the things to work just build sth or improve it.
Tomley, Talbot and Stempy.......yaaaas . What could possibly go wrong 🤔 👍🏻
Haha
It performed well on grass and if it was smaller it would probably set a new record on your indoor track. Good luck with racing Kevin Talbot.
Yes, more than likely! There is a New track record now.. video on the 'Cheap' RC that got it coming soon
Cracking paint scheme there
Cheers dude
The rear shocks are too long. Try either screwing in the shock eyelet in a few turns or fit a 2 - 4mm internal limiter under the shock piston to give it less travel.
Great looking buggy! Love the touch of silver.
Cheers Dexter
Clash of the titans.... AWESOME ...👍🇬🇧😎
It is really nice to see low cost high quality radio systems coming out these days 😄
If you can move the bottom end of the rear shocks out a little bit it should lower the ride hight and stop the drive shaft from pulling out of the cup. 😉
I applaud anyone who races using buggies I just couldn't get to grips with one so started racing with a more forgiving team associated Rc8 Truggy, so glad to hear you n kev racing and spreading your word out about the racing side of the hobby,
Beautiful build, Phil! 😃
It really runs nicely! Looking forward to the race!!!
Stay safe there with your family! 🖖😊
Thanks mate. You too
RUclipsr rivalry... of the healthy kind.
Boxing match is next year 😅
@@TomleyRC Better get the training in!
Spectacular rig. Cannot wait to see you compete!! Good times!!
Nice car the LC Racing stufff is quality, what about wider bearings? I use ones on my 14401’s that are a tiny bit wider than stock ones and stop my driveshafts popping out. Looking forward to the big race 👍
Yes, good idea
yea same thing here , wltoys use 1.8mm and changing them to 2.5mm fixed the problem.
@@TomleyRC MR74-2RS Ball Bearings Z2 4x7x2.5mm Double Sealed Chrome Steel 10pcs I get em off E-Bay and there about a fiver? Duh I just realised your car is 1/10 these are for 1/14 🙈 sorreeeeee 😆😆or they may fit? I’m going to shut up now!!
@@darkki94 yes they really tighten your car up and stop that wheel wobble and driveshafts popping out…👍👍
Wow i did the same, i guess a lot of people have done this, can’t wait for race to happen. Good for the community 😉👍🏼💯We all should get along & help each other💯Hope all is well Phil, btw did i miss that video of the USB soldering iron you was going to do a review on? Thanks brother
Traditionally you decrease your droop by shimming underneath your shock pistons to keep driveshafts from popping out.
Very nice! Looking forward to a good race!👍🏻🍻
Cheers Rob
It is the - Tomley International Team Shop - T.I.T.S. You are the - Tomley Unlimited Race Driver - T.U.R.D. This team is going places and clearly a factory team. Go get em Mr Tomley!!!!
Hahahaha
I’ve always wanted to race, but it’s been to expensive, now I might be able to
I agree on the turnbuckles. I've snapped a few myself. Weird how it's the metal part that breaks instead of the plastic breaking and stripping around it.
Can't wait to see you and Talbot race it out...!!! 👍😁
The Squeaky Castle 😂
It is going to be good as we all mo kev dose race on the truck can’t wat to see it happen lol good review bro 👍👍
Cracking paint job
Cheers dude
Nice buggy I think. Good to see what is on offer out there from lesser known brands. I think it's awesome that you are going to have a race with Kev. Another way of fixing that issue with the rear dogbones is to open up the shocks and put a bush on the shaft under the piston, this reduces how far down the shock and therefor the arm can drop.
Gearing it down is a good idea. You won't have the same top speed but that's not so important when racing on a track. it will accelerate out of corners better though.
Have fun when you race it :)
Yes, a few things to sort and hopefully it will perform well 👌
I love jore content🙏💪
Thank you
You and Kev are my 2 favorite channels to go to for R c's
We used to cut a small piece of fuel line from one of our nitro rc's and put it in the cup before the dogbone, wheel side :) Helps prevent them popping out :) Cheers !!!
awsome build
Must have front sway bar at least and tires of course!! Nice looking cars for sure!!
Never thought i would see the day you and Mr. Talbot in the same video.. Can't wait 😃
Nice paint job 👍
Thanks Mark
Put some fuel tubing inside the diff cup that will take up some space and help the Cvd
Can't think of two other people I'd rather watch race . Cool idea ! Fun for sure .
Oooooh Shiiiiiite; it had to Happen 👌❤️👌
Awesome for the Hobby❤️
Yes . Can go wrong with good old Lc racing . Also excited to see you and Talbot race . Clash of the titans but in a friendly way this time 😂😂
Kevin's good behind the wheel and the remote even with cheap rc your good too but iv never seen you race ,looking forward to it
,,,. Alex kowaliuk from America 🇺🇸
good luck to you when you get the chance to race against Kevin and his mates..can't wait to see that video! and....PLEASE don't let stempy take control of your buggy. we all know how he races! hahaha! cheers.
O ring under the shock piston is my favourite way to shorten them. I assume no droop screws odd on a racer. It does look like you can go out on the arm and in on the tower to lay them down more.
Put some Petro tubing in the dog bones to space them so they don't fall out. I'd go ahead and change out all the chamber links etc so they don't break while racing. Looking forward to seeing you guys race 🔥👍✌️
That thing even _sounds_ smooth. Can barely hear it. Great job on the car!
Ooooh I would to see rc Olympics between you and Kev. Best speed car, best basher, best basher under £100, fastest lap of arc, best skate park free style, crawler challenges etc...
please do think about it guys! Ooooooh the footage! 🙏
Yep, as others have mentioned, do this and that to it and it'll be that and this. But none of that will stop it being rubbish for breaking like that.
And, of course, never push on the turnbuckle or any suspension link to pop off the pivot cup. Use the tips of needle nose pliers to lever it off evenly.
I also use a 50 mm by 50 mm x 30 mm turbo fan to keep the engine cool with the heat outside cute little buggy
Feel tubing inside shock on shaft to limit its throw.. indoor won't mind.
All I say is - please win 👍🍺🇬🇧
Love the paint. I'm pulling for you should be good fun. I like Kevin also but he doesn't have the hand 😂😂😂😂😂😂
You know kevin talbot!!!!!
Nice build buddy an best of luck 😊👍 that lancia looks gorgeous 😁🙋♂️
I'd focus on the driving skills and not worry too much about the rig. Looking forward to seeing you in that T-shirt, ha
Love the LC Racing stuff and looks sick in your colours dude looking forward to see u go against talbot be a good watch that obviously be routing for Team TRC 😉
Yes, I love the Green/Grey combo
You better make the world’s best!
Lol
Nice machine good luck . Lol
Hey mate, I didn’t realise the PTG-2 is basically the PTG-1. Looks awesome. The Lancia PTG-2 is as good as you say!
I love the Lancia 👌
Put some Orings on the outer cups of the drive shafts
Hey there Phil, yah no what’s also crazy expensive….those freaking wee pointing fingers, £10+ on eBay….no fanks lol 😝
Awesome car buddy !
Cheers dude
Those tires may damage the carpet. I would recommend picking up a set of Proline carpet tires. Prism rears and Pyramids in the front.
Nice clean design on the shell 👍🏼Soon as I seen the title I wondered if you had a race lined up with KT who has been doing his race series. Will be good fun! Great video 👊🏼
Yes, hopefully will be good fun
I bought u coffees, but not sure it went okay. Love your show. Love the variety.
Yes, thank you. Appreciate it 😎👍
Kevin will win I think but be fun to watch
Prediction you win & Keven DNF’s with a broken car!
That be epic see you and keV all racing together that will be carnage haha 🤣😅
Demolition Derby
@@TomleyRC haha 😂 wish could be there too with my one be no much left haha 😂
the rear droop adjustment should help keep those driveshafts from popping out
Thats a little beast here Phil probably loads and loads of potential too and im guessing it will perform well on the carpet track thanks for sharing and might be a cheap enough indoor racer for me to look at possibly :-)
Look at the x-ray xt2 there on sale at a few shops ATM for less than half price
Yes, hoping with a few tweaks it will be decent
Put a spacer in your rear shocks under the piston to stop the over extension of the arms.
You need some proline racing tires buddy!
It looks like a great buggy.
Prepare for a Tomley tumble wumble😂
Set your droop screws so your shocks arent fully extended.
Cool little machine.
I knew you and Kev were hiding from us that your really best friends. Lol. 😄
Can't wait to see my two favorite R.C. RUclipsrs race and make a video together. 👍
lol
Easiest way to deal with those dog bones popping out is to add limiters inside the shock bodies stops them from dropping all the way when you jump
Your rear shocks sound like sweep from the sootie show 😂 great looking buggy and goes well too! Look forward to seeing video with you against Kev Talbot
We'll be seeing you at the club then I take it
Hopefully 😎👌
Also when you set your gearing you want the car to top out about 3/4's of the way down the straight you'll gain more time having good punch in the infield vs a bunch of top end
Wow 2 of the best RC channels I watch, You and Kev.. Wow that's gonna be awesome Race 😍..
Cheers dude
Copperhead 10 3800 KV sensored in a two-wheel drive slash 60 to 65 mph on a 3s battery with 32 pitch gears with a 15 tooth pinion and a 54 spur
Nice!!! If It has dogbones at the rear you can use small rubber o-rings yo keep the dogbones center, on the other hand nice of you guys to have that race, Its going to be a great colaboration, I'm going to be tem Trc for this one cheers mate 👍
LOL looks good, lost footage, so it happens to even one of the best, good to know. 😄
Nice
Used a droop screw to keep your rear suspension from over extending the driveshaft 👍
Everyone's got their way, hey as they say - more than one way to skin a cat... (Tho I never quite got where that expression came from 🤔 )
you better win!!! 😡😡 HAHAH!!! that's crazy you get to race with KEVIN!!!!!!! EPIC! can't wait to seee
😅
@@TomleyRC Lol you'll win bro!
I'm a bit divided with this kit... It seems to have some durability issues not present on the ptg-2 or probably their lc10b, even at Kevin's video you could see Vinny having trouble with it breaking down and he's just running regular carpet track jumps
Yes, maybe just needs a bit of fine tuning
I hope this means yalls issues are over. Looks like a fun rivalry now.
Did you ever race this LC Racing buggy or did you just race with the team associated?
HI PHIL GREAT BUGGY FROM A GOOD COMPANY. REALLY LOOKING FORWARD TO WATCHING THE RACE BETWEEN YOU LOT. WILL MAKE FOR A GREAT FEW VIDS. PREP CAR ECT. SHAME YOU BOTH COULD NOT SOME HOW MAKE SOME MONEY FOR CHARITY. TAKE CARE BUDDY 🇬🇧✌🏼🤩👍🏼🤙🏼
Thanks Mike. Maybe a charity race next year 👌
Hi mate it's probably a cut thread rather than a pressed thread on the turn buckle cutting a thread will always create a weak spot nice build though 👍
Awesome buggy! I am really getting interested in the LC line. Thanks for the great content, as always! 👍👍👍
Cheers dude. They are certainly nice quality
To fix the short shaft problem, cut short pieces of nitro fuel line and put them in the drive cups, sorted.
They are CVDs
Oops
Have you looked at that RLARRIO carbon fiber chasis 14th scale buggie
I was meant to get one, but it’s been stuck in customs since middle of June
Droop screws pimpin droop screws
The arms have no holes for drop screws
@@TomleyRC unbelievable!! Haha, need to borrow my drill?
Very helpful video, thank you. Did you get a grip on those popping-out drive shafts?
Place a thicker spacer beneath the shock piston to reduce down droop travel. And you will solve the CvD coming out of the drive cup issue.
👍
Kevin Talbot puts o rings inside the cup at the wheel to move the shaft inwards a bit as well.
@@muskokamike127 these are CVDs, so no option to do that
@@TomleyRC ah, that is too bad, it's an easy fix.
Those turnbuckles snap instead of bend a) because they are cheap metal but also b) (not to be capt obvious) is the metal is too hard. I think they are chinesium stainless and I've found whenever you see that "colour" they are extremely brittle. I think they put too much nickel and not enough steel.
Yes. Luckily you can get upgrades 👌
Brilliant video very good looking car, shame about the rear dog bones. You can shim the dog bone inward BUT the pin for the hex then runs on the outer bearing.
Same thing with wltoys but way more acceptable from a clone to be out of whack 👍
Yes, I think a few tweaks and it should be good 👌
@@TomleyRC No pressure but win the bloody race mate, #TeamTomleyRc
I'll stick with the TT02b
The hatte of Titans UK is on
You need to add limiters inside the shocks they are giving too much droop as is