2017 Ford F350 Lift Kit - 4" BDS - 17" Methods on 37s
HTML-код
- Опубликовано: 15 апр 2018
- 2017 Ford F250 / F350 Lift Kit Install. We went with a 4" BDS Lift w/ Radius Arms and Fox Shocks. Upgrades to the Fox 2.0 Reseviors with Carli Resevior mounts.
Wheel: 17x8.5 Method Hd 0 offset.
Tire: 37x13.5 Nitto Ridgegrappler 
Авто/Мото
Good looking truck man, it's nice to see a lifted super duty without low profile tires..,
Mamalona!! I'm perfect! I'm already in the project with the same truck!
Hopefully it helped and thanks for watching
You guys did an amazing job doing this step by step video
I have the ready lift 2.5 leveling kit and 35's and the 35's still look too small. Might have to step it up a notch. Nice set up man.
I have a 4 inch lift on my 92 bronco and I just put 37x12.50r 17x9 in and cut a tinny bit of the plastic of the bumper and it clears full turn I love it I’m gonna go 6 inch soon just because I’ll have more room for flexing and I don’t like a super tight tire it makes it look like a hot wheel lol
Yeah that makes sense. The newer trucks are more accommodating to large tires. Technically people with 37‘s with just a leveling kit on these trucks but kind of tight looking imo
Should serve you well as a offroad rig
Do the BDS Radius arms restore any caster? I know he Carli arms add 1 degree, but I would rather not pay $1,300 for radius arms if the BDS will do the same thing for less. I do not race off-road, I just go on fairly well groomed trails, gravel roads, etc..
Marc B yes the dbs radius arms correct the caster for the lift. No bump steer
What’s the pros of using radius arms in the super duty ? I’ve got A Ford Raptor so I don’t know the suspension details on the f250s
Sexy Psychopath solid front axle can typically take more abuse for heavy weight.
How much was the kit with the fox shocks? And where do you purchase from.
Sean Honahan $2600 from stage 3 motorsports. Dual steering stabilizers were an additional $550, no bump steer.
Nice... what’s the widest wheel you can use on a 4 inch lift and can you have a negative offset ?
Well.. Its pretty close to rubbing with 0 offset. Its always a gamble when you start moving that wheel out.
0 to -16 offset on a 18" wheels is safe for a 4" lift. Anything under 0 offset and you'll rub
Over*
I have a 3.5” lift running 37” x12.5 on 20x9 -1 on my 17 f250 ...
hey i hope you read this any issues with transmission as far as gear ratio etc wearing on the trans? or at least heard of anyone having those issues...
Dj Goliday last lifted 2011 6.7 f250 was sold at 150,000 Miles (towed everyday). No trans or rear end problems. Truck is built like a tank.
really appreciate it man, wanna start an expensive build but dont want to ruin a trans with the giant tires, low gear ratio etc so its either gonna be a ram 2500 or a F250...
Dj Goliday no man your good. The half ton trucks are more prone to problem with a larger lift and tires. Your safe with any modern 3/4 ton or 1 ton truck.
thanks so much!!!!!
What size jack stand did yall use cause im wanting to do mine as well amd have to use jack stands
I believe they were 6 ton jack stands
@@RaztechPowersports thank you loved the video
@@lexusman1989 appreciate it and thanks for watching. Good luck on your install 🔧
with the 37 and 4 in how the MPG city and Hwy?
Did you replace the BDS with the Carli ?
is the Carli a better ride?
@First 2win dam I cant find any place that will delete anymore. Got a 2019 350 couple days ago guess I'm stuck with the emissions crap. Thanks epa
Does the method zero offset make it look flush with the stock fenders ? Wasn’t clear in the vid but nice build
Sexy Psychopath they stick out a few inches. Zero offset means the hub is in the center of the barrel. So equal offset on each side.