How to Bypass GM VATS Security System
HTML-код
- Опубликовано: 26 авг 2024
- how to bypass the pesky GM VATS system
Song: MBB - Feel Good (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • MBB - Feel Good (Vlog ...
good morning by Amine Maxwell / aminemaxwell
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/2vpruoY
Music promoted by Audio Library • Good morning - Amine M...
------------------------------
🎵 Track Info:
Title: good morning by Amine Maxwell
Genre and Mood: Hip Hop & Rap · Calm
---
🎧 Available on:
Spotify: open.spotify.c....
SoundCloud: / g. .
---
😊 Contact the Artist:
aminemaxwellofficial@gmail.com
/ aminemaxwell
open.spotify.c....
/ aminemaxwelloffi. .
. aminemaxwell
/ aminemaxwell
To anyone who has done this VATS bypass already and your car suddenly randomly wont start, check the fuses in the fuse box below the steering wheel. You need to use a multimeter because visually inspecting a fuse doesnt always work. I did the VATS bypass and one day my car just did not want to start. I used a multimeter on every single fuse till I found one that was not reading, ( the # 6 fuse was the culprit!) so I popped it out, replaced it and the car started right up. I hope this helps anyone out there who is frustrated with a "No start" condition, as I was. Dont give up!
what was the fuse number 6 for?
I’ve been frustrated I’m about to try it on my 92 z28
Too many people try to bypass this in the most difficult way possible. Thank you for showing people how to do it the easy and cheap way. This is exactly what I'll be doing when I have this issue.
Me to
Sir, you don’t know how much this helped me I own a 1998 Cadillac El Dorado and all of a sudden my car started saying starter disabled remove key and I was told it’s my VA system that it doesn’t recognize it. I have the spare key that I have and when I brought the car sir, you help me out so much. I am now able to drive my car, I just have to get this done. I’ve been looking all over. RUclips your video was the one that explained it the best and actually showed how to do it.
Hey man, all I can say, is you are a great youtuber, you saved my rs - speedo fixing, key safety bypass, etc etc PLEASE keep the original type car content ! I could not have kept my RS all orig without you! Seriously! Your knowledge is very valuable!
Hey I'm having the same problem with my 96 Impala. Did the false key ignition signal go away on your your dashboard after you by passed it?
If you still have your original key like me, all you have to do is solder the wires to the actual key. The key has the resistor built in so I just connected the wires to both sides of the little chip. If u can’t solder hot glue it or super glue it then I put a new lock cylinder in with new key and works every time lol. I couldn’t find any resistors at a store near me and could wait for them to ship so this worked perfect for me.
Man that is way easier than I thought, thanks
New subscriber🔥🔥🔥 You’re the first person to actually show the process. Thanks!!
I've found that cooling down the key helped me out when the VATS system reared its ugly head. Used to carry a can of compressed air and held it upside down to spray key. Eventually found a bypass piece on E-bay that was plug and play. No cutting of wires.
What’s the name of the product? I need one now
Don't leave us hanging bro. Send the link
Its been years since I did it. I just did a quick search and this seller on eBay has the closest looking kit to what I used. Was a lot cheaper back then. isimotorsports
Thanks for being so informative unlike some of the others
thankyou for the information
You are the man !!!! Thank u my 1996 chevy carprice is doing the same goona do it I'll let know
Glad my third gen didn't come with VATS so I don't have to worry about this.
What im trying to find out how to bypass the whole vats system completely i have a 96 rivieracan anyone tell me how to bypass the whole system cause i didnt get a key and the lock switch was drilled out,does it shut the injecters off or just the fuel pump and starter?
I bypassed mine in a much easier way. The only thing the vats does is allow 12v to go from the neutral safety switch to the starter by opening a relay that is near the fuse panel. Just pull the relay and jump the 2 heavier gauge wires. Then the vats has no control over the starting.
Nice! Thank you!
What two heavy gauge wires do I jump...?
(Once I remove that solenoid )
@@sovereignentity4924 when you look at the connector it will have 4 wires, 2 smaller ga and 2 larger. Just install the jumper between the larger 2.
@@schadmoxey7848
So removing solenoid permanently , and jumping the two heavier gauge wires ,
and this alone will always bypass system and start car..?
I have an 2005 Chevy Impala and will pray it works..!
@@schadmoxey7848
Thank you either way ... 🙏
This was very helpful!
I always enjoy watching your educational video . Thank you!
Can you just buy a new key with the same ohms and have it cut ? Will that work without having to do the bypass ?
you can, it's just way more expensive than a $5 pack of resistors.
the VATS wire can also break inside the tumbler, in that case a new key wouldn't work.
Vats not only shut the starter it shuts the injection and fuel pump
Excelente forma de sacarte de un apuro ,pero ya sabiendo el valor de resistencia es mejor comprar la llave original
Es mejor asi plebe yo tengo de estos camaros y poco a poco se les acaba el resistor a las llaves y luego tienes que pagar pa una llave nueve que te sale como $150+. De esta manera esta cabron que se quede el carro
hey I been using a regular gm key for my third gen Camaro could I use the one with the black rubber on the end instead just want to make sure it doesn't affect the car in anyway if I use it
What was the resistor power you used? I have 91 zr1 abd wants to do the same
you have to measure the key and see. every car has a different resistance.
@@3rdGenGuy my key read out .68 when I put my reader at 20k
You should’ve soldered this in But maybe you didn’t have a soldering iron available thank you for still showing us
Crimps are superior to solder.
I build aircraft for a living & there's almost solder in aircraft wiring
If I lost the chip from my key do I have to just try each resistor?
yep,
only 10 options so not hard.
I agree with the other comment that this is the easiest way to do it rather than taking your dash apart as in other videos.
Cool Thanks
bro, the way you explained this and showed, a dog can do it! thank you
What do you do to bypass the entire module? Can you make a way that requires no chip or resistor? What if the VATS module is bad and doesn’t work?
there are full bypass write ups on forums.
This may be a stupid question. But I’m look at some of these and I don’t know which ones are the right ones. 1/4w 1/2w 1W and 2W. Which do I need? I have a 94 corvette
use a multimeter and probe your key.
if you don't have a key to probe, you can just guess.
only 10 different Vats resistors so you just have to test all 10.
I have a Buick Lesabre and I don't have the ignition key. How can I know the value of the resistor to do the bypass?
in the video it shows how to use a multimeter to check that.
nice & easy... THK
Can this work for a 4th gen camero
It will. Just did the same to a 2000 firebird. Same exact white wires with the orange cover, same connector.
I'm going to do this in a 1993 Buick Lesabre. I'm waiting on the resistors to arrive. I've looked under the dash and found the orange wire but mine doesn't have a plug of any kind. So do I do it basically the same way you did? Cut the orange wire and wire the resistor to the left side? Thanks.
Yes
Will this work on a 1997 caddy Deville ? Not sure of the spelling, but you know..
as long has it has the Key with the VATS chip in it.
As if my car wont read my key or locks me out for alittle then works
My 97 le Sabre does that same thing
Would this be the same thing for a 1989 c4 corvette im tryign tif igure out why it randomly wont start for alittle then will fire right up
that year should have s VATS system yes.
look on the vette pages to see the process/guide.
Jump the ground to the ignition to the last starter relay behind the glove box!!!!!!!
Same procedure for 2005 cts
I recently bought a 91 camaro with the vats problem.
I put a different ignition in it with a key that has a resistor instead of the ignition with a flat key.
My question is should I be using the multimeter on the plug opposite of the orange wire instead of the key to get a resistor reading?
not sure what you mean.
@@3rdGenGuy I'm struggling with a similar issue. I bought a 94. It ran pretty well considering. Now I have the vats issue. The car doesn't have the original key so I don't know how to get a resistance reading for the care. Any idea on how to go about it? The ignition wire was already cut when I dropped the kickboard but it wasn't connected to any type of resistor or anything. Still curious how it ran for 2.5 months lol
@@masonsteinert4344I’m wondering the same thing but also why you need to even do that as long as I do it the right way like him and crimp everything good why wouldn’t it work?
What is the number 6 fuse under the steering wheel what's it go for
Google a fuse panel diagram for your year of car.
there's also a convence center fuse box by the radio.
I wish I knew / saw this BEFORE exxon charged me $1,000
sweet
Will this system mods work when deleting the ebcm/abs system
depends no the car. my 1992 Camaro had a separate VATS module.
But I think later cars have the VATs inside the ECU that has to be deleted with software.
While you're at it, pull the left kick panel off and bypass the starter relay also. You'll thank me later.
Go speed racer, Go speed racer, Go speed racer Goooo!
Since my LS swap is nearing, I didn't want to re-wire anything only to gut it in a month.
@@3rdGenGuy Im really dissapointed that you are LS swapping that car.
@@budsodalsky i'm so sad to see that 122 horsepower of a 305 powerhouse go.
@@3rdGenGuy Yeah, because horsepower is all that matters! And bastardizing a beautiful original and replacing it with thousands of hacks is VERY different from every body else!👍
What if my key is reading out at .68 most of the time is that normal or am I doing it wrong
probably a bad meter
im about to do this on my corvette
Does this only work with the original ignition switch/cylinder?
the vats is just 2 wires.
so as long as the VATs module sees the correct resistance, it doesn't care what ignition you have.
Okay, I just replaced the ignition switch and it still would start due to the VATS. I believe this will work. Thanks for the awesome video
does the key fob work even after bypassing ?
no idea. I don't own a car with a Key fob ha ha.
A have a vats key#5 and it won't start my vehicle, if I do I bypass like in this video will the vats key#5 start my car?
if you bypass the Vats, the key will work regardless.
@@3rdGenGuy even on a 1998 Chevrolet monte carlo LS?
Hey how are you doing bro what if my key doesn’t have a chip does it already have a bypass on it ?
earlier GM cars don't have a VATS system.
I place the meter on my key but no number shows on meter. Whatsup?
is your multimeter set to a low enough range?
Mine has already been bypassed by the previous owner my relative borrowed my car and hit something when they got back the car died and wont even crank anymore idk how to fix it the previous owner bypassed the vats system using the spare key chip as the resistor while the main key still has its chip idk how to fix 😢😢😢
probe the key and match the resistor.
I bypassed my like this but now a year later I have the security light coming on again why
My security light sometimes came on even when the Car ran with a functioning VATS.
no idea why, 80s GM wasn't too smart ha ha
@@3rdGenGuy but my car won't start
@@3rdGenGuy hello your video really help me, but I’m concerned that my SECURITY light comes on sometimes (but my Camaro always starts). Do i need to do something more ? I don’t want to be in a situation where it wont start again… Thanks.
Or just pop out in the key and use for a quick not east fix but can be done if you don't want to wait on resistors.
I don't have that on my car?
optional on 88s, standard option on 89+, at least for firebirds.
On mine, I removed the module completely and bypassed the starter lockout.
@@mikeclark8370 aaah thanks, I have 85 so I don't have the system
Really didn't have to cut the wire, could've just unplugged it lol. After you cut it you still took the plug end out
So it's not my starter getting hot? It's the VATS?
depends, It could be VATS or a number of other things.
typically VATS kills the starter and nothing happens when you turn the key.
@@3rdGenGuy before buying a new starter, generally when the car was hot, meaning temperature of the day would be in the 100's and driving around, I would have to wait until the car cooled down to start the car, then started noticing it wouldn't start in the morning or cold days, installed a new starter, battery and alternator both good, and would start on first try 1 out 3 tries.
History on the car, 1992 B4C 1LE, bought back in 2014 with 89k miles, currently around 125k. I do have a Ravelco Anti-Theft system and car alarm on it. I do have both keys, but the back up key, the key I do not use, tends to perform better than my daily key.
All you guys forget to mention which resistor is the ideal one.. there's 2w, 1w, 1/2w 1/4 w ...
every car has a different reading, there isn't 1 size fits all.
You can grind regular non chip gm keys now much cheaper.
cheaper than a $5 bag of resistors?
@3rd Gen Guy I'm saying after you convert it with the resistors you can use any blank to grind copies of the key after that, no more chip key replacement.
Badass
I am about to try this on my 1995 eldorado
Wth is this? I am doing a SWAP. I don’t have a frickin’ KEY or harness under my dash… it’s a damn swap! HOW is this helpful??!!
if you are doing a swap you can just remove the VATs system.
this video was for guys with stock ish cars
The vats system is eliminated after an LS swap?
@@musketballmatt6773 Should be. No way it will be easy to get stock ECM to work with an LS. Its totally fucking different.
All you did was bypass the vats key not the vats system.
This is exactly what I was thinking... He replaced the key with a single resistor. Clearly the "system" is functioning properly. So... not sure how this would bypass the system.