This is the best explanation of how to set up QuickJacks I have seen. Clearly shows what needs to be done with excellent detail in each step of the process. Now, if the courier will only deliver my new 7000TL today as promised!! Lloyd
In Australia, our local supplier only has the 5000 and 7000. I enquired about a 6000 for my model S but the supplier has never had orders for them so they will not be in stock here. I will purchase the 7000 with the extension kit, even with this, the 7000 is 200mm too short so I will cut the ext units and add 200mm to each one and re-weld them back together, Good info and 369 liked.
I actually did a review video sharing my thoughts on the lift: QuickJacks 7000TL Review - Lifting My 2016 Toyota Tundra ruclips.net/video/qxkMDNavJ4Q/видео.html
Workers great w my s2000 as well but now that I dropped the s2k I need to drive it on blocks so I can slide the quickjacks under it. Also got the 7k lb so I can raise my Tacoma n 4r👍
So someone postes quickjacks on facebook and i cane bac to watch thia video again. I have never deeky with this system before and needed a refresher lol
The Quickjacks are great if you're lucky and get one without a defective air cylinder. If you do get one of those you're screwed - the company will 100% not stand behind their product. They'll claim the air-assist down isn't "necessary to the function of the lift". Really? So if one side has air assist down and the other doesn't, and they drop unevenly, that's safe? And then when the car vehicle drops to the ground ground and one side of the lift goes straight to the full down position while the other... doesn't. You need to wait... and wait... and wait for it to drop with no weight on it. Quickjack will claim this "is normal operation" and that "it will get better over time". If you invest a massive amount of time trying to get them to stand behind their product they will, eventually, after burning through every once of customer goodwill, send out a new cylinder. Yay! Until you get the replacement and the freakin' air side is literally capped off. Like intentionally made unusable. That's not a fix guys. Then they'll claim that the engineers decided the down-assist wasn't necessary and that they've changed the design on future models. But I didn't buy a future model with less functionality. I bought the current model with exactly the functionality I wanted, was promised, and paid for. Whatever. Too much time wasted on it already - I've written off the entire company as another skanky marketing hack with no integrity.
Got mine from Home Depot. It didn’t come with the wall hangers (probably wouldn’t use anyway. Mine was leaking fluid, and the fittings were loose in the box, no wrap around up/down switch, no ties on cables or compressor cords. No instructions included, but plenty of RUclips videos to watch. Might have a previous return. Also doesn’t have those wheel like items (lifts?). I’m going to assemble this weekend.
Save yourselves a shitload of aggravation. Throw that thread seal they provide right in the garbage and go straight to Teflon tape to seal fitting to hoses
You're not supposed to use the thread sealant on the elbow fitting. Not a big deal, but it's just what it says in the instructions. Also, the bleeding instructions say to first take jack up and down 3 times. Then open the screw to let the air out.
@@bradscarmods 4700, I'd have to get a similar setup with the extensions for the height difference. I imagine the Abarth and Miata have similar wheelbase, so that shouldn't be an issue. Really it's about getting the Minister of Finance to realize the value.
@edeverick23 haha always a lot of red tape there… You could get away with the smaller one then. They have a 5000lbs and 6000lbs system and the truck extensions will work with them all. Feel free to come by and check mine out before you buy if you want!
It's great to see the 7000 series can fit under a miata. Any issues at all? I want one of these bad for my LS swapped miata because the T56 is gigantic and getting the car high enough off the ground to swap the clutch is a nightmare on jack stands. I also want to lift my Tacoma and my girl's jeep. Thanks for the video, Brad. Subscribed.
No issues at all. I also ended up buying their pinch weld rubber blocks and it all works and fits great! Just measure from the ground to the bottom of your pinch weld and if it’s at least 3.5” you’re golden. Thanks!
Hows it work for the Tundra? I have a 2017 platinum, but also have an IS500, abd want something to work with both. Also, is this the tlx version or the tl? Im looking at the 7000tlx, since the tundra is a crew cab. And lexus is a 4dr, so figured longer is better. Don't really want a 2 post in the way at home when not using. Great video too man.
This is the 7000TL and funny you should ask, I just finished filming some work on my Tundra and I used the QuickJacks since so many people have been asking about the same thing. That video will be up next week once I’m done editing it so make sure you subscribe! Appreciate the feedback, thanks for watching!
@@bradscarmodsyou're welcome! Thank you for the reply! I'll keep an eye out for the Tundra vid man. Just figured the tlx might be better suited since i really don't have any short wheelbase cars. I'm used to atlas 2 post with triple extending arms, just really don't want to give up that area in my personal garage when not in use.
Great video. I am also planning to buy a 7000TL for my NB and other cars. Are you able to position the lifting blocks so they line up with the dimples on the pinch welds, or is the front one just before those dimples?
Was this the 7000LT Bundle?? Been trying to make sure you get the 8 rubber lift blocks AND the light truck / SUV stilts also in the bundle?? Can you confirm you got them all or did you order separately ?
@protectandswerve just to be very clear, as the title states, it’s the TL bundle, not LT and it came with all the extra stuff because it was a “bundle” from Costco. If you just get the TL from QuickJack it doesn’t come with all those things. You can add them on a make a bundle yourself.
@@bradscarmods that’s exactly what I figured. It’s just when I looked at the pictures for the bundle they never showed the eight extra rubber blocks. I just wanted to make sure that I got those and the taller pieces for the SUVs and trucks. Thank you for the extra reply.
Does the TL fit well on the other cars you mentioned? I'm trying to get my frist one and future proof myself. I'm about to pull the trigger on this same bundle
Yes, so far I’ve used it on my Miata, my wife’s Acura ILX, my son’s Mazda 3 and my neighbor’s Subaru Outback. I haven’t had the chance to lift my truck just yet but I have no doubt with the extensions the bundle came with it’ll work just fine.
I think I paid right at $1,700 for the bundle but at the time it was on sale at Costco. Not everyone has Costco, not everyone will find the bundle available or on sale.
This is the best explanation of how to set up QuickJacks I have seen. Clearly shows what needs to be done with excellent detail in each step of the process. Now, if the courier will only deliver my new 7000TL today as promised!! Lloyd
Thank you for the kind words!!
Agreed bro, just got my 24hr curing done on my connections. Bout to bleed and try it out now.
In Australia, our local supplier only has the 5000 and 7000. I enquired about a 6000 for my model S but the supplier has never had orders for them so they will not be in stock here. I will purchase the 7000 with the extension kit, even with this, the 7000 is 200mm too short so I will cut the ext units and add 200mm to each one and re-weld them back together, Good info and 369 liked.
Thanks for sharing your experience setting up the jack. Hope you still like it.
Thanks for watching! I absolutely love it and have been using it constantly for my Miata K-Swap Project series (more videos coming very soon).
I actually did a review video sharing my thoughts on the lift: QuickJacks 7000TL Review - Lifting My 2016 Toyota Tundra
ruclips.net/video/qxkMDNavJ4Q/видео.html
Great video, you set it up and included potential obstacles and how to get around them, thank you.
Appreciate the kind words!
Great assy video, thank you! Now I can order this and not the cheaper ones that I see online.
Great vid, thanks!
Thank a lot I follow every step you did, thank you so much teaching me
Now I can star doing my cars
Excellent how-to video sir. I appreciate the details while being concise!
Thank you! I appreciate that!
Thank you very much for this awesome video.
Workers great w my s2000 as well but now that I dropped the s2k I need to drive it on blocks so I can slide the quickjacks under it. Also got the 7k lb so I can raise my Tacoma n 4r👍
So someone postes quickjacks on facebook and i cane bac to watch thia video again. I have never deeky with this system before and needed a refresher lol
Haha that’s great!
Waiting on black friday.... Definitely could use it now though... Doing clutch change on my Honda Element. But ill tough it out.
Will be a game changer for doing a clutch job for sure!
The Quickjacks are great if you're lucky and get one without a defective air cylinder. If you do get one of those you're screwed - the company will 100% not stand behind their product. They'll claim the air-assist down isn't "necessary to the function of the lift". Really? So if one side has air assist down and the other doesn't, and they drop unevenly, that's safe? And then when the car vehicle drops to the ground ground and one side of the lift goes straight to the full down position while the other... doesn't. You need to wait... and wait... and wait for it to drop with no weight on it. Quickjack will claim this "is normal operation" and that "it will get better over time". If you invest a massive amount of time trying to get them to stand behind their product they will, eventually, after burning through every once of customer goodwill, send out a new cylinder. Yay! Until you get the replacement and the freakin' air side is literally capped off. Like intentionally made unusable. That's not a fix guys. Then they'll claim that the engineers decided the down-assist wasn't necessary and that they've changed the design on future models. But I didn't buy a future model with less functionality. I bought the current model with exactly the functionality I wanted, was promised, and paid for. Whatever. Too much time wasted on it already - I've written off the entire company as another skanky marketing hack with no integrity.
Nice video, well done. I'm gonna get me some!
Sweet!
Great video. So my lifts will not come down with no weight on them . Is that a bleed problem? Help
Got mine from Home Depot. It didn’t come with the wall hangers (probably wouldn’t use anyway. Mine was leaking fluid, and the fittings were loose in the box, no wrap around up/down switch, no ties on cables or compressor cords. No instructions included, but plenty of RUclips videos to watch. Might have a previous return. Also doesn’t have those wheel like items (lifts?). I’m going to assemble this weekend.
12:15 😂 happens to the best of us.
All too often my man lol
Save yourselves a shitload of aggravation. Throw that thread seal they provide right in the garbage and go straight to Teflon tape to seal fitting to hoses
You're not supposed to use the thread sealant on the elbow fitting. Not a big deal, but it's just what it says in the instructions. Also, the bleeding instructions say to first take jack up and down 3 times. Then open the screw to let the air out.
Now I'm jealous, I would love to have one that could lift both the Hummer and Abarth
What’s the hummer weigh?
@@bradscarmods 4700, I'd have to get a similar setup with the extensions for the height difference. I imagine the Abarth and Miata have similar wheelbase, so that shouldn't be an issue. Really it's about getting the Minister of Finance to realize the value.
@edeverick23 haha always a lot of red tape there…
You could get away with the smaller one then. They have a 5000lbs and 6000lbs system and the truck extensions will work with them all. Feel free to come by and check mine out before you buy if you want!
If you use the liquid thread sealer, you’re supposed to wait 24 hours before using.
Great job on this video dude. Really appreciate it. Super helpful. Have a 7000TLX arriving here in a couple days.
Are you still happy with the lift?
Yeah definitely still happy with it. I will actually have an update video going live this Friday so make sure you check that out too!
Cool 😎 !
It's great to see the 7000 series can fit under a miata. Any issues at all? I want one of these bad for my LS swapped miata because the T56 is gigantic and getting the car high enough off the ground to swap the clutch is a nightmare on jack stands. I also want to lift my Tacoma and my girl's jeep. Thanks for the video, Brad. Subscribed.
No issues at all. I also ended up buying their pinch weld rubber blocks and it all works and fits great! Just measure from the ground to the bottom of your pinch weld and if it’s at least 3.5” you’re golden.
Thanks!
Hows it work for the Tundra?
I have a 2017 platinum, but also have an IS500, abd want something to work with both. Also, is this the tlx version or the tl?
Im looking at the 7000tlx, since the tundra is a crew cab. And lexus is a 4dr, so figured longer is better. Don't really want a 2 post in the way at home when not using. Great video too man.
This is the 7000TL and funny you should ask, I just finished filming some work on my Tundra and I used the QuickJacks since so many people have been asking about the same thing. That video will be up next week once I’m done editing it so make sure you subscribe!
Appreciate the feedback, thanks for watching!
@@bradscarmodsyou're welcome!
Thank you for the reply! I'll keep an eye out for the Tundra vid man. Just figured the tlx might be better suited since i really don't have any short wheelbase cars. I'm used to atlas 2 post with triple extending arms, just really don't want to give up that area in my personal garage when not in use.
I don’t think you can go wrong either way. The TLX would not have worked with my teeny tiny Miata so I went TL.
In case you missed it: QuickJacks 7000TL Review - Lifting My 2016 Toyota Tundra
ruclips.net/video/qxkMDNavJ4Q/видео.html
Great video. I am also planning to buy a 7000TL for my NB and other cars. Are you able to position the lifting blocks so they line up with the dimples on the pinch welds, or is the front one just before those dimples?
Yes. They also sell pinch weld pucks. I have those as well and they’re well worth it!
@@bradscarmods 👍
Was this the 7000LT Bundle?? Been trying to make sure you get the 8 rubber lift blocks AND the light truck / SUV stilts also in the bundle?? Can you confirm you got them all or did you order separately ?
Yes, everything you saw in the video was in the bundle. Later I also got a 4 pack of the round ones with the slit in them for pinch welds.
@@bradscarmods Perfect! Thank you!
@protectandswerve just to be very clear, as the title states, it’s the TL bundle, not LT and it came with all the extra stuff because it was a “bundle” from Costco. If you just get the TL from QuickJack it doesn’t come with all those things. You can add them on a make a bundle yourself.
@@bradscarmods that’s exactly what I figured. It’s just when I looked at the pictures for the bundle they never showed the eight extra rubber blocks. I just wanted to make sure that I got those and the taller pieces for the SUVs and trucks. Thank you for the extra reply.
@protectandswerve you bet!
Does the TL fit well on the other cars you mentioned? I'm trying to get my frist one and future proof myself. I'm about to pull the trigger on this same bundle
Yes, so far I’ve used it on my Miata, my wife’s Acura ILX, my son’s Mazda 3 and my neighbor’s Subaru Outback. I haven’t had the chance to lift my truck just yet but I have no doubt with the extensions the bundle came with it’ll work just fine.
@@bradscarmods Ok thanks I ordered a 7000 TL bundle
@TheMidnightNarwhal right on! Really happy with mine for sure.
Never mentioned cost
I think I paid right at $1,700 for the bundle but at the time it was on sale at Costco.
Not everyone has Costco, not everyone will find the bundle available or on sale.
Boohoo 😢😢😢
Does it lift that tundra?
Sure does! I feel like I need to do a video or a short or something to show it.
I actually did make a video lifting my Tundra: QuickJacks 7000TL Review - Lifting My 2016 Toyota Tundra
ruclips.net/video/qxkMDNavJ4Q/видео.html