Thank you for your support. I got the same chainsaw and carburetor (020 AVP Stihl_ WA 1). My carb has two membranes and the gasket on top. The membrane with the two flaps first, then the second membrane and the gasket. In the video I saw that you put the membrane with the two flaps and I do not know If you put a gasket on top. My question is why if we have identical units the fuel pump arrangement is different. So I wonder if I should arrange it like you did, but first I am waiting for your opinion. Sincerely my respect and admiration for you. Take care
Hei ! Actually not sure what you mean. There is only one gasket and one diaphragm og that one with flaps...that opens and close the ports..due to pressure or vacuum. There is several clips demonstrating very clear what to do and hos to assemble. I guess you easy find out. Thank you for nice words ! ! 🙂
You welcome. That is the purpose and good luck with you machine. Let it last for long time. That is positive of course and many of them old...fasinating good and useful...still today. I like that...of course.
i rebuit the carburator with new the same repair set as you. the saw starts hardly on choke and if you just keep the gas in it works fine but when it goes to idle it just goes out and doesnt want to start for a few try''s. do you know whats wrong?
Hey ! I am no way expert on the carburetors...but it sounds like there is something blocking the flow when in idle. It could be several things...for sure...it could be that the needle does not close properly and by so doing blocking the idle flow of gasoline to flow in right way. It is much relaying on pressure and vacuum to operate and if leak somewhere...the prosess does mail function. Simple trick you could do is to check if the one way valve inside is shutting and opening. Regulate the spring for needle arm or the hight for the needle arm. Check the carb also for pop psi pressure...if you have a manometer ! ? Carb should also be ultra sound cleaned f.ecs. if some channel is blocked due to sediments or old gasoline... Hmm if you do not find out of it...replace the carburetor instead of spending too much time on figure out..I suggest. Good luck and watch other carburetor experts videos and might you get the answer ! :-)
@@motordiverse1276 Sorry, I meant from 8:42 when you put the gasket on, there's no bean-shaped diaphragm to go on there? I've seen similar designs but they use a diaphragm too.
Hey ! Yes I understand what you mean and say. I think there was no such diaphragm on this one... I see there is slightly different pasages under that hood or hatch...and I am not sure why and how.... I recomend to search and investigate further or do as it was...replicate what was...in your spesific carburetor. But. I too wonder why and what...about that question.@@sypher0101
@@motordiverse1276 For some reason, these sites do not support delivery to Ukraine... You can drop the link to AliExpress, because I don't know which members are suitable. Thank you in advance for your help.
The sound from the wind and the clock in the background is so relaxing.
He he thx for comment ! :-)
Thank you for your support. I got the same chainsaw and carburetor (020 AVP Stihl_ WA 1). My carb has two membranes and the gasket on top. The membrane with the two flaps first, then the second membrane and the gasket. In the video I saw that you put the membrane with the two flaps and I do not know If you put a gasket on top. My question is why if we have identical units the fuel pump arrangement is different. So I wonder if I should arrange it like you did, but first I am waiting for your opinion. Sincerely my respect and admiration for you. Take care
Hei ! Actually not sure what you mean. There is only one gasket and one diaphragm og that one with flaps...that opens and close the ports..due to pressure or vacuum. There is several clips demonstrating very clear what to do and hos to assemble. I guess you easy find out. Thank you for nice words ! ! 🙂
thank you sir for sharing your vedios,now l know how to clean the carb
You welcome. That is the purpose and good luck with you machine. Let it last for long time. That is positive of course and many of them old...fasinating good and useful...still today. I like that...of course.
ผมต้องการใช้คาบูตัวนี้ 1 ตัว
i rebuit the carburator with new the same repair set as you. the saw starts hardly on choke and if you just keep the gas in it works fine but when it goes to idle it just goes out and doesnt want to start for a few try''s. do you know whats wrong?
Hey ! I am no way expert on the carburetors...but it sounds like there is something blocking the flow when in idle. It could be several things...for sure...it could be that the needle does not close properly and by so doing blocking the idle flow of gasoline to flow in right way. It is much relaying on pressure and vacuum to operate and if leak somewhere...the prosess does mail function. Simple trick you could do is to check if the one way valve inside is shutting and opening. Regulate the spring for needle arm or the hight for the needle arm. Check the carb also for pop psi pressure...if you have a manometer ! ? Carb should also be ultra sound cleaned f.ecs. if some channel is blocked due to sediments or old gasoline... Hmm if you do not find out of it...replace the carburetor instead of spending too much time on figure out..I suggest. Good luck and watch other carburetor experts videos and might you get the answer ! :-)
Could also be...you did something wrong with the gasgets orientation...open and check ! 🙂
बहुत बडीया भाई
Kako se napravi punjač za aklumator 24volte
?
8:49 No diaphragm?
12 :18
@@motordiverse1276 Sorry, I meant from 8:42 when you put the gasket on, there's no bean-shaped diaphragm to go on there? I've seen similar designs but they use a diaphragm too.
Hey ! Yes I understand what you mean and say. I think there was no such diaphragm on this one... I see there is slightly different pasages under that hood or hatch...and I am not sure why and how.... I recomend to search and investigate further or do as it was...replicate what was...in your spesific carburetor. But. I too wonder why and what...about that question.@@sypher0101
Good day. Do you sell a set of membranes for such a carburetor in Ukraine?
Hey hey ! Can you not order on e-bay or wish.com or alibaba.com or amazon.com or other online on internet ? That is what i do. Hmmm
@@motordiverse1276 For some reason, these sites do not support delivery to Ukraine... You can drop the link to AliExpress, because I don't know which members are suitable. Thank you in advance for your help.
@@АндрійМілько-ж9н www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20220713121755&origin=y&SearchText=husqvarna+44&spm=a2g0o.detail.1000002.0
@@АндрійМілько-ж9н www.wish.com/search/Carburetor%20stihl%20020/product/612caa0ddf634ca1a476b3b9?source_feed_page_view_id=1657743776_cb21d8bd24ed4da5badd1f22cd23ad99_SearchPage&source=search&position=7&share=web
@@АндрійМілько-ж9н Dobre djen ! Many have that set. Walbro WA 1
😂come ordinare carburatore walbro. X decespugliatore grazie
Lo q no hay q hacer
Hmm ?