Thank you for the console section. I just got issued this truck and that knob was in my blind spot. Call me a young'un but I like to see a numerical display of my speed rather than eyeballing a moving Guage when the cop is over yonder.
I realized the high beam switch was broken but on my model its on the stick for signaling left/right and you pull it towards you and it should click on/off and there's a highbeam symbol on the signal stick/shaft
I understand its has a dark mode. But does it has a setting where it controls the AC for me while im in the sleeper without me leaving the truck on & it turns its self on and off without killing the battery like the new freight liner does?
Chris Make Beatz Something wrong with your system if it’s killing your battery. My 2016 Freightliner will turn off the compressor if the battery get to low.
what position is the key in the ignition suppose to be able to pull out at? example acc off on or start . I cant seem to pull it out at the off position it only pulls out on the ON position
DexS203 Philo-mantra All the way to the left is accessories. Straight up and down is off and in that position you can take the key out. All the way to the right is where you would start the truck. However when you turn the key to the right you have to let it sit for a few seconds. Then you can continue to the right and it will start. I think this has to do with the glow plugs.
Their is a dark mode. Where you open the door the over head light will not turn on. I use that mode be cause I don't want to wake my student up. When going in and out of my truck.
Thank you for the console section. I just got issued this truck and that knob was in my blind spot. Call me a young'un but I like to see a numerical display of my speed rather than eyeballing a moving Guage when the cop is over yonder.
So glad you made this video
Thanks for making this video it helped a lot
Why did u not show controls on steering to make complete? Good video though.
Thank you
Thank you so much !!
Great video. Thanks 🙏🏾
You didn’t go through inverter process, heater and AC instructions?
I'm be back in my truck Tuesday. I'll make a video on that.
Where’s the trailer break located at
Thanks man!It helped a ton!
how do you use the engine brake on those type of trucks..i saw some kenworths with the engine brake control in the steering wheel..
It's a 3way switch.
U awesome!!!
Thank you
How do you turn on the high beams 🤔
This is what I'm trying to figure out lol
Same
Same
I realized the high beam switch was broken but on my model its on the stick for signaling left/right and you pull it towards you and it should click on/off and there's a highbeam symbol on the signal stick/shaft
How do I get my mileage back??? Some how it went to active trip
Does your Kenworth have srs for driver safety or rolltek
Yes, it does.
Thank you
Can you the the windshield washer how turn on!!!
Thanks
I created a video for you.
ruclips.net/video/vL6MFqM_H2o/видео.html
I understand its has a dark mode. But does it has a setting where it controls the AC for me while im in the sleeper without me leaving the truck on & it turns its self on and off without killing the battery like the new freight liner does?
Chris Make Beatz Something wrong with your system if it’s killing your battery. My 2016 Freightliner will turn off the compressor if the battery get to low.
Chris Make Beatz yes, it does. At least for my kenworth ta680 (2018) if you need to know how to do it, let me know
@@KendallCayson I am interested in knowing.
what position is the key in the ignition suppose to be able to pull out at? example acc off on or start . I cant seem to pull it out at the off position it only pulls out on the ON position
DexS203 Philo-mantra
All the way to the left is accessories.
Straight up and down is off and in that position you can take the key out.
All the way to the right is where you would start the truck. However when you turn the key to the right you have to let it sit for a few seconds. Then you can continue to the right and it will start. I think this has to do with the glow plugs.
Your truck has to be stopped, in neutral, and the parking break applied.
Is there any interior comfort mode on these?
Their is a dark mode. Where you open the door the over head light will not turn on. I use that mode be cause I don't want to wake my student up. When going in and out of my truck.
@@thomastalkswithderon9570 where’s that dark mode button at?
You must be with werner there trucks are set at 68 for curce
Nope... I'm with a difrent company...
👍
Thank you