My dad has a weed eater push mower and I got it running. And since I got it running with help from you I now have 2 push mowers and one RIDING MOWER. Next summer I am starting a lawn mowing business. Thank you :).
Love the videos keep up the good work I'm 14 and do the same thing to you have taught me a lot about these machines would love to see some kinda time trials for all of the mowers that are made for mud.
I started with looking for maintenance tips for my tractor mower, you tube opened up pandora's box. You are the best mower tinkerer i have seen so far, hard to believe that you haven't tried anything from PF engineering yet. You would probably take it to another level on the cheap too.
What a awesome build love it. I haven't been putting out much content for a while or watching working so much since they let a guy go. Have get you a plate out from South Dakota.
Awesome build, oddly enough I've seen mowers that only shutoff with that fuel solenoid in the carb. They don't even have a ground post on the coils to kill them that way if you wanted. People always think somethings wrong because it takes a few seconds to shutoff.
It is a 6 inch pulley with the holes, should have much slip at all. Will have to test it more next time I go to the river. thanks for watching. Also if you check out the Infernox channel, he built a siege machine out of an old Cub...
Looks real nice, I'm thinking you should figure out how to put another rear end assembly in the front with some kind of double pulley system to make a 4 wheel drive, or make that one 4 wheel drive. Thank you for the video.
Love the build man looks awesome ❤ you were asking for suggestions of things to do id love to maybe see a homemade tire crushlock don't know how well it would look on a mower but id like to know how youd tackle one with tour creativity and skullset
it's beautiful. all that space if you could find a suzuki quadrunner front axle rotate it vertical belt/pully on input shaft it's 4wd. did you see the captain america bike from easy rider on auction again next weekend seems to change ownership every few years
Have you ever used elastomeric caulk to fix a mower seat? I used jd yellow and put the caulk in a pail and spray paint in it and stirred it till it was acceptable color and filled in the cracks in a seat and covered the whole thing.. been 5 months since I did it a d it looks good still flexible as the day It dried. If you got a bad seat try it. 6 bucks for a tube of caulk and 7 bucks foe a can of paint can't buy a seat even ratted out for that.
@@chud327 yea they super expensive but them cheap Amazon diesel seem to be pretty good just have to grind the crankshaft down to fit pulley you build awesome stuff I’d love to see what you do with a diesel
hey man i was just wondering if you think you could give me a v2 mower i have been DIYING to do this and i built my mower but it has a hydrostatic and it dosent go fast at ALL
Takes quite a bit of insight to see these thing..... I can't but you've got this artistic side coupled w/ mechanical prowess that enables you to merge this sH!Te together & even make it look easy..... it ain't but it is fun watching someone who can do all these things ! So I'll be here watching....... peace
Watching people do things I never thought of opens my eyes to possibilities..... with that comes belief & faith. I know you might think that's a strange way to look at things but my eyes are open which is how/why I stopped on your little show here. I saw something in it that was different. Carry On, Sir. peace
I love you’re videos l wish I could be like you I’m starting to make a mud mower so if you read my post could you please send me some Tyers so I can finish my mud mower build
This has got to be your cleanest build yet! Love the stance, keep up the good work! 👍
Also loving the new longing and more detailed videos
Yea this John Deere is sick! I have a x360 and this has inspired me to start a mud mower project!
My dad has a weed eater push mower and I got it running. And since I got it running with help from you I now have 2 push mowers and one RIDING MOWER. Next summer I am starting a lawn mowing business. Thank you :).
That is very cool and hope it goes well for you. Thanks so much for watching.
Thank you I am a big fan :).
You should bring it out to hogwaller. We’re doing a big mower meet October 5th !
Keep your work up and I really think that you will get to be a mechanic when you are older
Love the videos keep up the good work I'm 14 and do the same thing to you have taught me a lot about these machines would love to see some kinda time trials for all of the mowers that are made for mud.
Speed runs or speed runs in the mud? Thanks so much for watching and for the comment! Keep building!!
Chudd you’re almost at 200k subs. This is one of the coolest custom builds I’ve seen with wheels. Great job buddy
@@roxastherogue thanks so much and thanks for watching!!
@21:25
Just blew my mind with that one. I totally forgot about the "Spirograph" I had as a kid lol
I've said it before, you sir, are a genius!
Insane build enjoyed his contraptions made me to hop on marketplace and buy a cheap mower to have cheap fun 😊
@@cattlevalleyfarms good idea and thanks for watching !
You are a great mechanic dude you're simply awesome👍🏆🏆🏆🚜🚜🚜
@@kevinbreaker2683 wow, sweet, thanks so much and thanks for watching!!
Such a cool rig, came together so nicely!
@@bazilwreckerloughead was a lot to f work, but well worth it. Thanks for watching!!
wow love this new video i cant wait to see more drives using it i can't wait to see more builds love this channel so much!!! Thanks Chud!
I started with looking for maintenance tips for my tractor mower, you tube opened up pandora's box. You are the best mower tinkerer i have seen so far, hard to believe that you haven't tried anything from PF engineering yet. You would probably take it to another level on the cheap too.
@@alexm2833 thanks so much, I need to look into it and thanks for watching!!
Great video and what a nice build this John Deere is! I really like that you made one video of the whole build of this tractor! 😊
You cannot beat the way a V-twin sounds. The brands all sound different but all sound good.
@@rods.3245 so true and thanks for watching!!
What a awesome build love it. I haven't been putting out much content for a while or watching working so much since they let a guy go. Have get you a plate out from South Dakota.
@@SDMountainMan watch when you can, thanks friend r watching!! I don’t have a SD tag yet…
Nice tool box👍
@@kevinbreaker2683 thanks, I love it, thanks for watching!!
Another great job,works really good in the high water:)
Best one I have for deep water, should snorkel just in case I accidentally hit a drop off... thanks for watching.
Holy crap, you got some loud frogs
deafening at time after a big rain. thanks for watching.
I love watching your videos so much
I love hearing that so much, thanks so much for watching!!
Best yet keep up the good work ❤
@@LynnAmos-xf8dx agreed and thanks so much for watching!!
Very nice left on that John Deere if welting to get pause attraction. THANK YOU FOR THE VIDEO
Thanks for watching.
Awesome build, oddly enough I've seen mowers that only shutoff with that fuel solenoid in the carb. They don't even have a ground post on the coils to kill them that way if you wanted. People always think somethings wrong because it takes a few seconds to shutoff.
I see the holey pulley mod was used on the monster. I have heard it helps the slippage noticeably. Cool build
It is a 6 inch pulley with the holes, should have much slip at all. Will have to test it more next time I go to the river. thanks for watching. Also if you check out the Infernox channel, he built a siege machine out of an old Cub...
This is awesome. Amazing job!
Thanks so much and thanks for watching.
can never go wrong with a lifted riding mower!
@@IsaacSchuler so true and thanks for watching!!
Good Job My Friend !!!!!
Thanks so much and thanks for watching.
This is inspiring, nice looking machine.
Looks real nice, I'm thinking you should figure out how to put another rear end assembly in the front with some kind of double pulley system to make a 4 wheel drive, or make that one 4 wheel drive. Thank you for the video.
That is definitely a Big mud mower that you have in your stock Chud
Awsome build I may build one keeping the original gearing pully reduction and going r1 lug for pulling and hills work
I got to say a very nice build dude
Thanks so much and thanks for watching.
Im speechless, We have a mint John Deere 160 5 speed were gonna make into a mud mower, right now were working on a exahuast stack like a tractor.
@@weaverfamily6506 very cool!! Let me know how it turns out!! Thanks for watching!!
@@chud327 Will Do!, No problem.
Great job 👏 👍
You need to bring that mower to Iron horse mud ranch October 10 - 13
That would be super cool and thanks for watching.
thats kewl man
Thanks so much and thanks for watching.
Awesome stuff
Oh you were right I did in fact enjoy this video
Very cool and thanks so much for watching.
A little baby turbo paint it green with a chrome single 45 degree angled stack❤😂
Oh, that would be sick. thanks for watching.
Super cool project
This stuff is entertaining
Thanks so much and thanks for watching.
@@chud327 your welcome
@@chrisgore9700 awesome to get a reply too!!
Love the build man looks awesome ❤ you were asking for suggestions of things to do id love to maybe see a homemade tire crushlock don't know how well it would look on a mower but id like to know how youd tackle one with tour creativity and skullset
Monster deere runs and looks nice!
Rack and pinion for better steering and a big brake kit!!
both would be great, especially the big brakes... thanks for watching.
Fun Project
4x4, lifted mower like this at some point., maybe.
Just the Cat and Dogs helped out this time, no kids, lol
it's beautiful. all that space if you could find a suzuki quadrunner front axle rotate it vertical belt/pully on input shaft it's 4wd. did you see the captain america bike from easy rider on auction again next weekend seems to change ownership every few years
Pas les coups de gaz sans échappement tu pourrais plié les soupape
Possibly and thanks for watching!!
cool project
You need to make it a 4 wheel drive mower a winch would cool to
A winch would be cool and planning to do a 4X4 mower, but who knows when it will happen, thanks for watching.
Have you ever used elastomeric caulk to fix a mower seat? I used jd yellow and put the caulk in a pail and spray paint in it and stirred it till it was acceptable color and filled in the cracks in a seat and covered the whole thing.. been 5 months since I did it a d it looks good still flexible as the day It dried. If you got a bad seat try it. 6 bucks for a tube of caulk and 7 bucks foe a can of paint can't buy a seat even ratted out for that.
23:20 = genious
That thing is awesome! How are the mud lites
They are good, but I think the Gators will be a bit better. thanks for watching.
The cat was like It's 1 pur power
Love it
Thanks so much and thanks for watching!!!
Guess the frogs liked Little Debbie’s visit. 😂
If their volume indicates like, it was the best day of their lives... thanks for watching.
w build
awesome!
The original “lift kit” would work perfect on my Murray how much do you want to it?
@@obsjunkie9122 not much, but I may have lost half of it… thanks for watching!!
Careful, you going to make the John Deere company try to come up with a Mud lawn tractor of their own because of the popularity. lol
@@larryfulmer that would be cool! Maybe they will give me one.. thanks for watching!!
Name: BIG JOHN😂
Very good suggestion , I was thinking Big Bad John like that very old song... and thanks for watching.
@@chud327 no problem keep up the good work
We need to find you a Rotax engine and transaxle sitting on the side of the road next to a trash can. Of course then you'd need a helmet 😂
Hey chud Are you planning on doing a video on the old cub Cadet any time soon
@@Johnhomes-d5h yes, is on my list, thanks for watching!!
Do you ever plan on building a diesel mower?
I want to make one and snorkel it for deep water crossing, but finding a deal on a good diesel engine has been tough. thanks for watchikng.
@@chud327 yea they super expensive but them cheap Amazon diesel seem to be pretty good just have to grind the crankshaft down to fit pulley you build awesome stuff I’d love to see what you do with a diesel
Woot 👌
Thanks so much for watching!!
Are you doing more s10 videos soon
I am doing a red Craftsman at the moment, but hope to start on the S-10 right after. Thanks for asking and thanks for watching.
i am making a mower designed for speed but i dont have a manual only a hydro but i'll work with what i got
And when it breaks make it a manual, thanks for watching!!
Husquavarna mower next?
I need to get out my Husqvarna soon and ride it some. Is that the one you are talking about?Thanks for watching.
@@chud327 your welcome and thank you for makin some bad ass mowers
I noticed you bought a new drill the drill you’re using is not as dirty as the old one you had
My Wife has a pair of flip flops just like those .
Great minds think alike. She has good taste, thanks for watching.
how long will a mower tans last going 43 mph
Good question, but I am not sure. Thanks for watching!!
I've noticed you changed your profile I like it and that John Deere is a monster do you like it
I felt it was time for an update. I love that john deere and thanks for watching.
Hi
Hello and thanks so much for watching.
Make an x pipe for the exhaust
That may be for the next one I am doing. thanks for watching.
hey man i was just wondering if you think you could give me a v2 mower i have been DIYING to do this and i built my mower but it has a hydrostatic and it dosent go fast at ALL
I don't think I have a manual mower I am ready to get rid of, keep an eye on marketplace. thanks for watching.
Put another gear box for the front tyres for 4wd 🤷♂️
Takes quite a bit of insight to see these thing..... I can't but you've got this artistic side coupled w/ mechanical prowess that
enables you to merge this sH!Te together & even make it look easy..... it ain't but it is fun watching someone who can do all
these things ! So I'll be here watching....... peace
Thanks so much, it wasn't that hard, but it did take more hours than expected.... thanks so much for the awesome comment and for watching.
Watching people do things I never thought of opens my eyes to possibilities..... with that comes belief & faith. I know
you might think that's a strange way to look at things but my eyes are open which is how/why I stopped on your little
show here. I saw something in it that was different. Carry On, Sir. peace
#TRUEFAN
I cUGHT A PREMEIRE?????
Very cool, glad you made it!!! Thanks for watching.
Hey 4 wheel steer
That would be very cool and thanks for watching.
It's not a John Deere engine, it's a Briggs..
I have the exact same tires and rim size on the mower on my pfp, this pic is old so it has different rear tires😂
I love you’re videos l wish I could be like you I’m starting to make a mud mower so if you read my post could you please send me some Tyers so I can finish my mud mower build
I probably have some tires, but shipping is so expensive... What state are you located in? Thanks for watching and good luck.
Make me one😅how much
Don't you know how I saying that I have a mower with a Briggs and Stratton v twin engines. It sadly blew up on 😢😢😢😢😢
complete;y useless...i love it
Hey can I get that Murray from you I don’t think you ever responded when I texted you the other day