Nice re maiden flight without heart attack 😅. New CG and adds seems working perfectly with v tol abilities... Thanks maestro sharing products technical details 👍😁
Wow, I never realized that scrappy was 3D printed airplane, reinforced with fiberglass. I found your channel and watched your videos from finishing touches of the old scrappy. So I newer went back and looked in to the beginning of scrappy.
Man... you are breaking my heart. Not fair... just wow!!. I will repeat what I said a while back, name your price. Be an honor to have one of your builds. 😊 Never loose faith.. one day perhaps. Simply amazing craftsmanship and talent.
Hello Thank you very much. My big dream and wish is that one day I can only build RC models, that all my income comes from building and flying them. Yours and comments like yours are very important to me as they reassure me that I am on the right way. Thanks again
Every single build is amazing. Like production airplanes but way better. They are a finished product!! I have over 300 rc toys. So I have seen a few and built a few and your craftsmanship is top notch sir!!
Hello. The wings are made of foam and a balsa fiberglass shell. The stabilizer is made of balsa with fiberglass reinforcement. All my drawings and projects are here. All of them can be scaled, but it may not be very easy grabcad.com/marko.roolaid-1
There is a far easier and faster method to apply your 3m vinyl and it comes out perfect. Look up compound curves for the wrapping industry- tips and tricks. Cool modern build, thanks for the video.
which is the reason that you have 1 mm nozzle? I have done some tests and with 0.4 mm nozzle, flow at 100%, I have a 1.2 mm wall thickness ...do you have a minor flow eather? thank you
In general, there is a desire to get the maximum wall thickness with one layer. I also used 100% flow myself and got a wall thickness of 1.2-1.3mm with a 1mm nozzle. If you got the same result with 0.4mm nozzle, it is also suitable.
Where is Mike Patey? That is an incredible build. You are an incredible RC Model builder. I'm in amazement at the scale detail.
Nice re maiden flight without heart attack 😅.
New CG and adds seems working perfectly with v tol abilities...
Thanks maestro sharing products technical details 👍😁
Wow, I never realized that scrappy was 3D printed airplane, reinforced with fiberglass. I found your channel and watched your videos from finishing touches of the old scrappy. So I newer went back and looked in to the beginning of scrappy.
You are the most amazing RC builder I have ever seen, just amazing, prefect. She is a riper.
thank you so much
Man... you are breaking my heart. Not fair... just wow!!. I will repeat what I said a while back, name your price. Be an honor to have one of your builds. 😊
Never loose faith.. one day perhaps. Simply amazing craftsmanship and talent.
Hello
Thank you very much.
My big dream and wish is that one day I can only build RC models, that all my income comes from building and flying them.
Yours and comments like yours are very important to me as they reassure me that I am on the right way.
Thanks again
Fantastic Marko 👍 Hope Mike sees this vid.
I hope to see it too. Especially motorcycles. I believe they have never been added to an RC airplane before. So @MikePatey I hope you like it
Every single build is amazing. Like production airplanes but way better. They are a finished product!! I have over 300 rc toys. So I have seen a few and built a few and your craftsmanship is top notch sir!!
Hi, Thank you, Thank you so much
Startet printing the fuselage this week 😍
@@mammut139 I am very, very much waiting for the result👍👍👍
👍👍👍Ein Traum, wie Du diese neuen Techniken beherrscht. 👍👍👍
Great work,
As always!
Amazing build as always ,tks for sharing!!
Now it's time for scale tail wheel suspension😃
Why not, but probably not anytime soon😀😀😀
Nice work, great flying!
Amazing craftsmanship 👏👏👏
Thank you
Great tip!
Moisture the balsa before laser cutting.
Hi ! Marko ! You make me dream every times ! 😅 awsome ! 💙 ✈️ 👍
👍👍👍 thanks
Hey man the build is incredible, would you please be able to put a link to where you got the tyres, the shocks, and the engine, thank you
Hi, Tyres link www.lindinger.at/en/AIRPLANES/AIRCRAFT-ACCESSORIES/Wheels/AIRTOP-BALON-WHEELS-200MM-2PCS./15841
Shocks www.lindinger.at/en/CARS-BOATS/CAR-SPARE-PARTS-AND-TUNING/RC4WD-KING-OFF-ROAD-SCALE-PIGGYBACK-SHOCKS-W-FAUX-RESERVOIR-100MM/9724284
Engine rcworld.com.au/products/ngh-gt35-35cc-gas-2-stroke-engine-w-muffler/
Only one word, wonderfull...could you tell me how big is the nozzle printer? Thank you
Hi, 1mm nozzle
Just awesome!!
Incredible plane, congrats! Can you ask me 2 questions? 1st - do the wings and stabs 3D printed - 2nd - any plans for a small scale scrappy?
Hello.
The wings are made of foam and a balsa fiberglass shell. The stabilizer is made of balsa with fiberglass reinforcement. All my drawings and projects are here. All of them can be scaled, but it may not be very easy
grabcad.com/marko.roolaid-1
Superb!
thanks
Лай не смотря сразу;) Мне очень нравятся ваши технические решения и подходы- люблю нестандартный взгляд на вещи.
большое спасибо
There is a far easier and faster method to apply your 3m vinyl and it comes out perfect. Look up compound curves for the wrapping industry- tips and tricks.
Cool modern build, thanks for the video.
And nice smooth camera work by the drone pilot, too, cheers!
How well does the 3d printed shell reinforced with fibreglass and epoxy stand up to the sun?
If it's a good, heat-resistant epo resin, there's nothing to worry about
Super job, as always! Could you sharevthe fuselage painting technic?
Hello. In general, as usual - sanded, primed, sanded again, then painted and varnished. And of course, finally, polishing
1st, dude your builds are always amazing keep up the good work
How did you make the wing struts?
Hi, video here ruclips.net/video/RWbtPJ8i7iQ/видео.htmlsi=YxTuy3v4r4TD33AE&t=362
@@markoroolaid Thanks! Excellent idea building those struts and slats!
Which CAD modeler software is this?
Super nice... Motor is the Roto FS 85?
No no. GeeBee R3 has Roto 85. Scrappy has an NGH 35
which is the reason that you have 1 mm nozzle? I have done some tests and with 0.4 mm nozzle, flow at 100%, I have a 1.2 mm wall thickness ...do you have a minor flow eather? thank you
In general, there is a desire to get the maximum wall thickness with one layer. I also used 100% flow myself and got a wall thickness of 1.2-1.3mm with a 1mm nozzle. If you got the same result with 0.4mm nozzle, it is also suitable.
Can you share the moto dummy also Roolaid?
Hello, would it be possible to know where did you buy the large vacuum bag?
Hello
This vacuum bag is designed for packing clothes. Here in Estonia, it is sold in practically every supermarket
ผมขอขอบคุณๆมากครับที่คุณมาจุดประกายไฟในในของผม ทำให้ผมอยากกลับมาเล่นrcอีกแต่มันเป็นไปได้น้อย เพราะลูกสาวของผมเขาไม่อยู่แล้วเขาเป็นคนแรกที่อยากให้ผมเล่นrcให้เขาดู เขาจากผมไปโดยไม่ได้สั่งเสียเลยสักคำ ขอบคุณครับ👍👍👍❤❤❤
ขอบคุณมาก. ฉันหวังว่าคุณจะยังคงสร้างและบินเครื่องบิน RC ได้ ฉันหวังว่าคุณจะดีที่สุด. คำทักทายจากเอสโตเนีย
Fantastic Marko 👍 I hope Mike sees this vid.
Can I buy a scrappy build one from you?
My honest answer is no. I do not manufacture these planes for sale. It's just a hobby for me.
Amazing job! If you wanna sell it, I am a buyer
, please let me know
OK :)
Comment
Are those two dirtbikes 🤔 very cool!
Electric dirtbikes😀😀😀
@@markoroolaid Do they come off and run rc?
I would like to say of course, but still no 😀😀😀
@@markoroolaiddo you have the stl. File for the bikes? So awesome;)
Motor kaç CC
Hi, motor NGH 35
@@markoroolaid nitro yakıtlı mı benzinmi