With this Self test you can only read fault codes (DTC Diagnostic Trouble Codes) in the Instrument Cluster IC/ Instrument Panel Cluster IPC) Not in Engine Control Module (PCM ) or Body Control Module or other.
Oh good to know. So you are saying the codes are only applying to the instrument cluster. Not the engine, or the body control module. The codes do NOT apply to these....
Worked perfectly on my 2014 C-Max Energi. Unfortunately I couldn't get it to throw a wrench light when I was driving it. Having a problem with the electric cabin heater not working. Heater will only work when the gas engine is running.
Thank you for the video. Do you know how can i connect the smartphone via USB? Focus MK 3 trend model doesnt have aux input and USB doesnt recognize the phone.
I believe that USB is for storage device only (like a pen drive). If you can set your phone to work as an USB data storage device then you should be able to see its contents in your car.
a co jak mi nic nie mruga ale przy cofaniu autem nie ma charakterystycznego pikania i szary obszar cofania nie zmienia się na zielony, pomarańcz i w końcu czerwony. o co chodzi??? można samemu zrobić reset jakoś??
Where is the part in trip computer that tells you if you have been changing gear, accelerating properly. Its gives you a star with 5 lines for each ratings, cant find it anywhere now
Brooooooo !!!!, you are the man with the solution !!, i know it !!, if you fix this, youll definetly help thouthands of ford focus 2012 and onwards owners... its the fucking SYNC, bluetooth problem and also cant access aux mode with the button... just stays in radio mode or swich and cant do shit.... "solutions" that where teied by me and billion others... disconecting the battery, disconecting the fuse, master reset, fabric update.... nothing seems to work !!, but you, i knew you where somewhere out there... be our hero bro !!!
ABS sensors are always active. Used for traction control, ESP, detecting low tire pressure, estimate vehicle position change when there's no GPS signal and to calculate vehicle speed.
With this Self test you can only read fault codes (DTC Diagnostic Trouble Codes) in the Instrument Cluster IC/ Instrument Panel Cluster IPC) Not in Engine Control Module (PCM ) or Body Control Module or other.
Oh good to know.
So you are saying the codes are only applying to the instrument cluster.
Not the engine, or the body control module. The codes do NOT apply to these....
Does everyone else use this menu for the digital speedometer every time they drive, or is it just me?
Worked perfectly on my 2014 C-Max Energi. Unfortunately I couldn't get it to throw a wrench light when I was driving it. Having a problem with the electric cabin heater not working. Heater will only work when the gas engine is running.
Speed gauge must be fun! Thanks for the tip!
Thank you for the video. Do you know how can i connect the smartphone via USB?
Focus MK 3 trend model doesnt have aux input and USB doesnt recognize the phone.
I believe that USB is for storage device only (like a pen drive). If you can set your phone to work as an USB data storage device then you should be able to see its contents in your car.
I have the same issue... can not make calls or listen to my pen music via my phone :(
Hi, how do i turn the gauge sweep on?
What are all the led test items
Check use manual for details.
Thanks. Works on my focus mk3
a co jak mi nic nie mruga ale przy cofaniu autem nie ma charakterystycznego pikania i szary obszar cofania nie zmienia się na zielony, pomarańcz i w końcu czerwony. o co chodzi??? można samemu zrobić reset jakoś??
I fitted a new battery.. On mk3 it came up normal mode when turned ignition... Is this OK or normal
How do you access this with focus with no sync on steering wheel
Does this work on the keyless model too?
Yes.
How do I do this if my steering wheel doesn’t have the okay button?
Okay nevermind you turn the key to on but don’t start and hold the trip odometer button until it says test and then press the button to toggle through
That is all nice and handy . But what about cars with push button start ?
Press Start/Stop without pressing any pedals so the ignition is on but the engine stays off.
Can this reset BCM unit and fix some headlamp malfunction service required errors?
I have the same problem did you try or fix and how ?
By the way, what's the number for normal battery? Is 12.1 okay?
12.1 with engine off, ignition on is about right
@@mrfixpl thank you so much! 😊
@@mrfixplIs 11.7 still ok? what is the lowest before bad battery? Thank you
@@jurck1 that seems low however a Google search will tell you. I think 12.4 is about right
Brought this up on accident today. Can the menu cause any problems?
I don't think so.
What is EEPROM NVM (I have 26.202), RAFE(I have 1000), AD imput 36 and below 1? And my Battery is 14.2 at 1000 rpm or 2500rpm, is it a issue?
Battery 14.2 Volt, it's fine.
great video. thanks!
Happy to help!
Where is the part in trip computer that tells you if you have been changing gear, accelerating properly. Its gives you a star with 5 lines for each ratings, cant find it anywhere now
Go to your miles per gallon screen and press right on the directional pad and it will show up
witam. czy w mk3 po lifcie dziala tak samo?
Nie mieliśmy okazji sprawdzić, ale od kilku lat we wszystkich modelach Forda wygląda to podobnie.
How i turn on gauge sweep?
How about those whells without buttons?
it is S model for us push button on dash and turn on key well i use while drive digital speedometer lol
Mine engine blog the yellow symbol still on what may be the causes please any solution to that please ??
You will need to scan your car to check what’s the actual fault code.
@@mrfixpl thank you sir
accidentally turned test mode on in ford focus one day and it’s been on for weeks anyone know how to turn it off any help appreciated
Don't leave your car running for weeks 🤣
Nice one thank you
✌️
Brooooooo !!!!, you are the man with the solution !!, i know it !!, if you fix this, youll definetly help thouthands of ford focus 2012 and onwards owners... its the fucking SYNC, bluetooth problem and also cant access aux mode with the button... just stays in radio mode or swich and cant do shit.... "solutions" that where teied by me and billion others... disconecting the battery, disconecting the fuse, master reset, fabric update.... nothing seems to work !!, but you, i knew you where somewhere out there... be our hero bro !!!
EASY fix...
Remove SPARK PLUG for Bluetooth located passenger side under dashboard.
What does the odometer reading show? Not miles as it does not match the mileage done.
I believe that's number of pulses from the ABS sensor for 1 kilometer.
Even if ABS hasn't been activated?
ABS sensors are always active. Used for traction control, ESP, detecting low tire pressure, estimate vehicle position change when there's no GPS signal and to calculate vehicle speed.
Do you flat tow?
@@mrfixpl sorry but could you expand on that. What does that show (pulses from ABS) and how is it relevant to odometer?