Lol I can't even lie. The PS button on my controller would not work. I beat the controller and it came on. Took it apart looked at the wiring and the battery was not plugged all the way in. Shout out to PlayStation factory good job. Appreciate the informative video, taught me how to disassemble my controller and how to reassemble. FYI the controller is working perfect
Same but doing anything would not fix, just opened my ps4 today, saw there was a gap like 🔵🔵🔵🔵🔵⚪️⚪️⚪️⚪️⚪️⚪️🔵🔵🔵🔵🔵 in ps button circuit ribbon . Trying to fix it rn
Great vid, some buttons stopped working on my PS pad, found a new ribbon online for £4 and replaced it using this video as a guide. Great work LanterN !!
I was fixing my joystick drift and accidentally scratched the ribbon. Analog buttons all dead now lol. Ordered a replacement ribbon and gonna fix it tmrw. I was just curious on how to detach the L1/L2 and R1/R2 and this vid showed it perfectly. Thank you!
Hi I’m wondering how I can fix my ps4 controller because my ps4 home button won’t work I opened it up and cleaned it with rubbing alcohol then worked for like a day then today it wouldn’t work at all please help
Dude my problem is that I accidentally spilled alchohol moisture inside the joystick on the left. After that the controller stopped connecting and just charges. Please reply because I wanna know if there is something to fix my ps4 controller Edit: again bro please reply 🙏
My controller Dpad and L1 L2 buttons not working. I ordered replacement but will it work? I'm afraid of contact pin or board broke. But it never falls or rough using it was working but after lie around for 2 week it just broke.
You want a much better way to take the triggers off? Press one of the triggers and put your butter knife into the gap that opens between the trigger and bumper button, then press your button closed gently. The trigger button will come out very easily.
Well its worth a try, the ribbon circuit board only cost $5. If you dont want to replace the ribbon circuit board, you can try taking out the ribbon circuit board and putting it back in and seeing if that fixes it.
How do you get the PCB button ribbon kajigger to stay in place when closing it up? It doesn't want to stay put even with the tiny pegs poking through it.
It usually has some give to it, but if it's been placed onto the pegs and still moving drastically. Then u haven't slid the PCB ribbon UNDER the tiny clip on the peg that holds it in place.
My question is for the ribbon circuit board, what did u pick? Because on Amazon and others websites, it shows something with JDS with numbers, and some are for the gen 1 controller and some are for gen 2, so since I have gen 2 controller what would recommend?
Bro my controller is not working like it's dead ... So I opened the controller and check the cable ribbon is broken if I replace the cable ribbon ... If there is any chance my controller is alive again please reply need your help
I think so, almost completely sure. I just looked at a teardown of the v2 ps4 controller, link: ruclips.net/video/nK3Ez60gDq4/видео.html and it looks identical to the a3 so yeah. I would open it up though first to make sure.
Use a screw driver, and hold it with a tissue and try really hard to unscrew, if you cant ask someone else to help you. If your square button is not working, its most likely a bad ribbon circuit board which you have to replace, like i showed in the video
It works for all ps4 controllers, just make sure you order the matching ribbon circuit board from ebay. You will know your ordering the right one if they are the same shape/layout. If you need anything else, just leave another comment, thanks for watching!
@@lanternnnnn well if you have a certain model controller opening it like he did at the beginning will pop off one of your trigger buttons like I did :( no worries tho it just pops back in place :D x3
@EN3ERP4O Download a computer program called DS4Windows from Jay2Kings and connect your controller to your computer by USB. Test all your buttons. From what you just described to me it sounds like your PlayStation button doesn't work. If it is the case then im afraid that you have to do exactly in this video or by a new controller.
Lol I can't even lie. The PS button on my controller would not work. I beat the controller and it came on. Took it apart looked at the wiring and the battery was not plugged all the way in. Shout out to PlayStation factory good job. Appreciate the informative video, taught me how to disassemble my controller and how to reassemble. FYI the controller is working perfect
Same but doing anything would not fix, just opened my ps4 today, saw there was a gap like 🔵🔵🔵🔵🔵⚪️⚪️⚪️⚪️⚪️⚪️🔵🔵🔵🔵🔵 in ps button circuit ribbon . Trying to fix it rn
Great vid, some buttons stopped working on my PS pad, found a new ribbon online for £4 and replaced it using this video as a guide. Great work LanterN !!
Worked perfectly for me. I just took a circuit board from another broken controller and watched your video step by step. Thank u
Glad i could help! Thanks
@@lanternnnnn yeah my triangle and square button stopped working even after cleaning inside. It was just the circuit board
I was fixing my joystick drift and accidentally scratched the ribbon. Analog buttons all dead now lol. Ordered a replacement ribbon and gonna fix it tmrw. I was just curious on how to detach the L1/L2 and R1/R2 and this vid showed it perfectly. Thank you!
Did it work?
@@jayforeverrollin Yes, works like new now
@@TheOvieShow appreciate it man. Bless
The samething happened to me I barely nicked the power botton film on the pcb and that was it the power botton is done for
Thank you My ribbon is blue can I use a green one same version..will it work please??
Holy fuck.....thanq soooo mucchhhh......i can't believe i fixed my controller by myself.......
Hi I’m wondering how I can fix my ps4 controller because my ps4 home button won’t work I opened it up and cleaned it with rubbing alcohol then worked for like a day then today it wouldn’t work at all please help
Dude my problem is that I accidentally spilled alchohol moisture inside the joystick on the left. After that the controller stopped connecting and just charges. Please reply because I wanna know if there is something to fix my ps4 controller
Edit: again bro please reply 🙏
ruclips.net/video/5wRcMIZ1OnI/видео.html do this
@@lanternnnnn I did nothing happened yet
My controller Dpad and L1 L2 buttons not working. I ordered replacement but will it work?
I'm afraid of contact pin or board broke. But it never falls or rough using it was working but after lie around for 2 week it just broke.
Thank you bro im buying a new controller and fixing my old one your a real one
Mate btw epic repair vid 😂. But I have a problem, replaced a joystick and now my L3 clicking doesnt work. Any fix?
Replaced a joystick, do you mean off the main board? Because the joysticks are soldered on
LanterN Yes on the motherboard.
@@simply-speaking how did you replace the joystick? Did you unsolder the other one and solder the new ine on
LanterN yes
You want a much better way to take the triggers off? Press one of the triggers and put your butter knife into the gap that opens between the trigger and bumper button, then press your button closed gently. The trigger button will come out very easily.
Thank youuu!!
what is the difference between JDM-040, JDM-055, JDS-055
Some buttons are dead and some are pressing without me pressing it do you think replacing it will fix it? The ribbon circuit board?
Well its worth a try, the ribbon circuit board only cost $5. If you dont want to replace the ribbon circuit board, you can try taking out the ribbon circuit board and putting it back in and seeing if that fixes it.
@@lanternnnnn thanks
PH3DZ X3 did it work
Thanks so much🙏🏾
Does this fix dead button? My R1 all of a sudden is not responding at all, do you think by changing or removing and placing again will work?
Did it work bro?
The ribbon holder on my motherboard fell off is it possible to go back on? I
Where did you get that circuit board bro? I bought one from Ali xpress and it only lasted me a month and a half..trashhh
the way you where handing that knife in the start made me freak out
How do you get the PCB button ribbon kajigger to stay in place when closing it up? It doesn't want to stay put even with the tiny pegs poking through it.
It usually has some give to it, but if it's been placed onto the pegs and still moving drastically. Then u haven't slid the PCB ribbon UNDER the tiny clip on the peg that holds it in place.
This is real home friendly. Use epic knife to untight the screw. Btw, thanks for the great video.
My question is for the ribbon circuit board, what did u pick? Because on Amazon and others websites, it shows something with JDS with numbers, and some are for the gen 1 controller and some are for gen 2, so since I have gen 2 controller what would recommend?
U can pick anything from there its all the same but i recommend u use the j 40 so it would be easier to put on your controller
@@aizhenromero5338 Thanks I'll give that a try!
@@samigaming1339 did it work?
@@jayforeverrollin I never really got to get it since I just ended up leaving it.
Bro my controller is not working like it's dead ... So I opened the controller and check the cable ribbon is broken if I replace the cable ribbon ... If there is any chance my controller is alive again please reply need your help
Yes its either the battery or the ribbon circuit board
Another question is A3 for v2?
Thanks again
I think so, almost completely sure. I just looked at a teardown of the v2 ps4 controller, link: ruclips.net/video/nK3Ez60gDq4/видео.html and it looks identical to the a3 so yeah. I would open it up though first to make sure.
Is there any other possible way to fix it my l2 trigger is dead.
Somtimes when i hit the controller it starts working Again...
@@-arod-7635 it could be the ribbon circuit board is damaged, so try this video and replace the ribbon circuit board and it should work again
Did it work? My l2 and r2 doing the same thing
@@truefacts6830 i tried changing the ribbon but it didn’t work i just took it to a professional fixed it in 10 minutes
@@-arod-7635 okay, i might have to bring in mine as well. Thanks !
The way you removed the r2 l2 triggers is how i scratched the film and r1 button dont work be careful guys
every time i’m on games such as fortnite, when i press L3 it switches my guns and i have L3 set to crouch any help to fix this?
Try and reset custom controls and redo them and see if that fixes it
@@lanternnnnn still does not work
@@392BJhave you ever spilled any liquid on your controller
LanterN no not at all i thought it was the pcb
@@392BJ it could be
How tf ur mother board just comes off dude mines is stuck on there like wtf
How do I fix my ps4 controller squte button not working and it has really tight screws
Use a screw driver, and hold it with a tissue and try really hard to unscrew, if you cant ask someone else to help you. If your square button is not working, its most likely a bad ribbon circuit board which you have to replace, like i showed in the video
Is this for the old ps4 or pro?
It works for all ps4 controllers, just make sure you order the matching ribbon circuit board from ebay. You will know your ordering the right one if they are the same shape/layout. If you need anything else, just leave another comment, thanks for watching!
@@lanternnnnn well if you have a certain model controller opening it like he did at the beginning will pop off one of your trigger buttons like I did :( no worries tho it just pops back in place :D
x3
how to know what circuit ribbon to buy? my ds4 model is cuh-zct1h
Not sure man, you can open it up and see what it looks like that way
My dude broke out the big guns to pry it open 💀
Omg thx so much!
i did this and now my controller wont charge or connect, thanks a lot man.
Sounds like you might of damaged a ribbon cable or scuffed the board when installing.
@EN3ERP4O Pardon?
@EN3ERP4O Download a computer program called DS4Windows from Jay2Kings and connect your controller to your computer by USB. Test all your buttons. From what you just described to me it sounds like your PlayStation button doesn't work. If it is the case then im afraid that you have to do exactly in this video or by a new controller.
Kitchen knife, the universal tool