7 Ways to Fix R2/L2 Trigger Button on DualShock 4 PS4 Controller (stuck, worn spring, sticky) how to
HTML-код
- Опубликовано: 21 июл 2024
- The Trigger (aim) buttons on the DS4 are problematic, but these methods may help fix some of the issues.
Patreon:
/ kevinsthreechannels
Use "Buy Me a Cup of Coffee" to make a one-time donation:
www.buymeacoffee.com/HowToX
Product Links:
Button Replacement Kit: amzn.to/401p5xe
Analog Replacement Set: amzn.to/401pkbC
Precision Screwdriver Kit: amzn.to/3TtYrur
Micro USB Charging Cord: amzn.to/3LBsu1x
Charging Station: amzn.to/3ySg8ue
TESmart 16×1 HDMI Switch 4K@60hz: amzn.to/3Cqng3j
Kinivo 5x1 HDMI Switch 4K@60Hz: amzn.to/3GhtVhn
AVSTAR HDMI Switch 4x1 4K@120Hz 8K@60Hz: amzn.to/3IrNkyN
llano HDMI Switch 4x1 4K@120Hz: amzn.to/3GceEhO
Cable ties: amzn.to/3GGdFI2
Highwings HDMI Cord 4K@120Hz 8K@60Hz: amzn.to/3IADuum
All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)
..............................................................................................
Chapters
00:00 Intro
00:35 Cardboard blade
01:02 Vacuuming
01:15 Blowing
01:23 Internal cleaning
04:56 Putting spring back in
06:21 Fix/replace spring
08:08 Tape/caulk
09:51 Replace pad
10:35 Outro
#GamingTheSystems Игры
Things you may need:
Precision Screwdriver Kit: amzn.to/3TtYrur
Button Replacement Kit: amzn.to/401p5xe
Analog Replacement Set: amzn.to/401pkbC
Micro USB Charging Cord: amzn.to/3LBsu1x
Charging Station: amzn.to/3ySg8ue
All Amazon links above are affiliate links. I get a small amount of money if you end up using them to make purchase (it does not have to be for the item I link to, as long as you click my link then move to another item, it works)
W
Water? Use wd40
Ok so for those that still have an issue, it might be the one I had. My r2 on my controller kept going off nonstop. Every time I COD or Fortnite my guy shoots without me touching the controller. Sometimes it stopped but he mostly kept shooting. I took apart the ps4 controller. You have to get to the contact points which are behind the buttons, in front of the plastic thats in front of the motherboard. Make sure to take out the r2 & r1 button. Once you get to this clear film, you’ll need Isopropyl Alcohol with cotton swabs. Clean all the contact points with the cotton swab that has been dipped in alcohol. Once cleaned, put back together & it should work as new.👍🏽 Just did mine & it works like brand new.
P.S You might as well clean everything with alcohol to save you future trips from opening the controller to clean it again. Merry Christmas & Happy New Years👍🏽
i love you so much bro
fixed my problem
Nvm doesnt work after a day
Mine still don’t work
@@frosty.999any update?
Thanks, man. Controller started sticking for the first time, was prepared to take it apart. But then your video’s progression method actually did enough to fix it. Solid advice, here’s some for the algorithm.
Thank you so much! I was having a breakdown trying to figure out why it worked in the main menu but not in apps. I pulled the L2 button down and blew into it super hard and saw visibly there was less dirt in that crack. I went into my apps and now it works!! I don’t have to get a new controller!🖤🖤🖤
I'd never seen such a great and detailed explanation on something. Top notch!
Method 6 was THE BEST, thank you for making such a helpful tutorial 😁👍
such a well thought out video going through absolutely everything , thank you
Method 1 and 3 were a life saver. I got controller that was working fine for years until suddenly the l2 button didnt work. Thabk you so much 🙏
My problem is when i press R2 both R2 and L2 work at the same time but not the other way how do i even fix that
THANKYOUUU, taking my trigger out and then back in magically stopped the shallowness when it came back in❤️❤️
Managed to swap the springs and silicones of L2/R2 between each other. Now my R2 works perfectly!!! thnx a lot duude!
Showing the screw sizes was very helpful thanks. I think the contact point on my l2 had some dust cleaned out the button not that there was any visible dust. And blew compressed air at the contact point. And bam all fixed responds like normal again.
Is this for all ps4 controller models? My controller model is CUH-ZCT1E and the strings looked like it had a different placement
Method 6 the tape hack is revolutionary thank you for the idea 🙏🏾
hey so as i took out the l2 button something broke, mire specifically the little thing ehich was holding the spring down broke and now the spring is not in its correct space what do i do?
very helpful video, not many do that close up shots this made it easy to see what i was having to do, thanks a bunch.
Thanks so much for this, man! I didn't think the tape would work but it did perfectly. It might be just a matter of time before I have to replace the silicone completely, though. My only suggestion would be to put the reassembly all together at the end of the video. I had to seek back and forth to find the different levels of diss- and reassembly, to make sure I was doing it right. Again, great video and thanks for the help!
The fact that he showed both models of the DualShock 4 is absolutely awesome👏 my R2 would go off out of nowhere and then stop it wasn’t bad or anything but would definitely cause some issues while playing cod and fortnite so I removed the R2 like shown in this vid and it definitely has some sort of dust inside, it all came out with a little brush and running the R2 under water
These videos were really helpful! I bought 2 very cheap controllers, one with R1 always "on" and the other with R2 not working at all, the first just needed a deep clean on the conductive flex cable with isopropyl alcohol, the other one has visible degradation on one of the paths for the R2 button and the multimeter confirms there's no signal, so I'll order a replacement flex and save 2 controllers from their sentence to the landfill 🙂
What does it mean if the R2 button is less resistant like it goes down and moves way to quickly and the r1 doesn’t it also some times pushes the R2 button even when my finger is of it
How do I fix a button that popped out of place without breaking the rest of the controller?
method 1 is the best man thank you for helping me and lots of people you deserve a sub!
My controller is new but now the l2 button doesn't have much tension like the r2 does it still works but I'm kinda worried is this anything to be concerned about and can it be fixed easily?
Thank you so much buddy, The 6 method with layers of tape worked ;) If I didn't find this video, I'd have to spend my money for service. Greetings from Poland🇵🇱
I have problem of L1 and L2 and Dpad buttons all of them not register when press only L2 that always pressed while the button not physically press.
I tried clean the rubber pad, ribbon circuit and contact pin but still no luck
What happen to my controller?
Note I'm now ordered ribbon circuit board for replace old one.
U deserve more fame the first method even helped because my L2 was not conntecting correctly sometimes
Hello my controller got broekn ther the sprint suppost to sit the plastic have any idea what i can do to fix it
Thanks. This helped. I was traveling with the controller and the trigger got jammed weird, which made it permanently stuck because the little nub that’s supposed to keep it inside the casing got pushed outside the casing. Upon reassembly the springs were driving me nuts so I tried it back together without them. Works fine so far, will reinstall them if the controller is acting weird. Oddly enough, it didn’t seem like the springs were ever through those side pegs to begin with. So I guess they were just hanging out squished between components.
Best on RUclips! Made life easy & controller functional! Thank you Kevin!
Hi i have a problem where the L2 button doesn’t work, when i play minecraft the L2 button doesn’t work at all BUT when i play other games it work??? Is it an issue with the controller or my minecraft settings?
Hello. Thanks for your good video. Can we use the one with tail on other game pad? I bought the wrong one. Is there a way to modify it somehow?
Thanks man, helping a lot with the cardboard one alone, also pro tip, if you don’t have any cardboard you can just fold paper into a sphere like shape to make it thicker and work the same as cardboard
I did all and my R2 button still keep trigrring without pressin it.
What about changing conductive film? Doese it fix my problem?
I did the 1 method and the controller instantly started to work lol, thanks a lot
My controller works fine and all but the R2 does the work the first time I press it, usually I have to press it 2 times which isn’t good during games. Any fixes?
hi i have a problem. my r2 isn’t stuck but for some reason, it keeps triggering. i was playing gta 4 and when i got to the game, niko just started shooting his gun and i suspect its something with my controller
Thanks for the detailed video! Unfortunately, I couldn't even open the controller, as the screws were too tight (nothing helped lose them), and my screwdriver was slightly bigger than needed. I'll have to get another one.
Thank you, firstly I had a little doubt that tape will help me, after previous methods, but it did!
Thanks man
Cool
Does this controller have L3 and R3
Like some games ask to press L3 and R3
My controller is fine no problems but i played gta and my r2 feels a bit lighter when pressing then l2 any problem?
Can you do one on a ps5 one
My controller R2 button doesn't go all the way down can you please tell me how to fix this and when I need to use it in games other than Fortnite it doesn't work
I have a problem at r2 I dropped a screw and now the trigger has the game on the left and right going to fail me?
Thank you, you saved me from sending my expensive roller for repair that would take weeks to come back. You are the goat I wish I could give you more than just 1 like
I used a knife to remove the screws and pry my roller open
My R2 is working but can’t automatically sub play when playing any help?
My r2 button is getting stuck because everytime i press it one of its rod is coming out of place. Is there anything i need to do to fix this?
My Problem is i have a custom Controller its a ps4 Controller that has the Buttons like a x Box Controller and the r2 Button keeps getting stuck(when i shoot in a Video game i hold the Button and when i stop holding r2 it still shoots so i have to get the Button out
I just fixed mine using your advice. I feel like fixing another 1 lol got me hyped
I accidentally messed up the blue part of the ribbon cable any fixes?
Hey this is a amazing video that goes over how to fix this problem but my r2 button automatically pressure it self, I did everything in this vid and it most certainly helped me a lot I saw a reduce in the number of times it happens from every 3 sec to not as often now but I still face the same problem any fix or recommendation
Just fixed my L2 button spring, THANK YOU V MUCH MY BOI
Before my r2 button worked but now when i press it i have to press the whole button Done to shoot or build and edit whit r2 can you fix it
R2 for me is being activated by just holding the remote any pressure will cause it to activate 😢😢, how do I fix that, I went thru all your steps but no luck
all others where unclear but yours was brilliant it wasnt to fast you said what might happen you warned us what would happen if we did it wrong thanks 10/10
can i ask, with the battery thats in the ps4 controller. Are you able to glue in the thing that the battery connects to?
This guy did, but it looks like a lot of work. ruclips.net/video/V6QC4pWJpc4/видео.html
Just a question is a ''sticky button'' that it doesnt work. Cuz i have a problem with my controller that it keeps clicking after i click on my r2 and l2 button. is that the same as a sticky button or is that something else?
Yes. You should try some of the things in the video.
I got the problem with L2 when I press it, my camera moves up i don't know what's going on with my Controller, please any fixes ?
When im playing racing games, the R2 button are not fully press, like when i check on gamepad test, it's only go to 80% press which is make my car minimal speed and not in full speed.
god thank you so much, i was on my way to buy a new one and spend all my money, but i said lets give this video a chance and it actually worked
my trigger button is not locking in could help me fix it
Thank you the 1st 2 steps worked for me!!!
My R2 trigger on my ps4 controller activates by itself got any fixes?
My R2 button is only registering about 50% when fully depressed in racing games like GT Sport. I wonder if one of these methods can fix the problem.
My PS4 L2 makes me aim down sight in payday when not even using the button and I have to push it to stop. And it makes a clicking noise when pressing it
I was connecting my controller to my phone played for a while and then I tried to reconnect and sign in L2 bumper didn’t work and I need that to sign in or my dad is gonna kill me please help I just got this ps5 and can’t take the controller apart
This video actually helped me so much, thank you so much. God bless you.
Method 5 fixed it for me, thanks!
I have my controller connected to my PC to see the sensitivity of each button while doing the cleaning. My R2 button is stuck at full Y rotation. Doing cleaning with a q-tip with alchohol or moving the pad around at all makes no change in Y rotation. I'm assuming that connector is mostly just broken?
The R2 button on my controller is constantly being registered without even pressing anything. This was confirmed when I tested the controller through some software. The whole area around the button is completely and I even replaced the conductive film in case that is the issue but it didn’t fix the problem. I’m lost for ideas….
hi i got a problem where my new dualshock 4 mismatch every key after some game of gow2
Thank you so much ! my L2 button spring was out and i clean it all around it and it help so much and it become lika new controller again first time i leave any coment on anny video ! and you get a like from me !
what im sopose to do when i disconnet the blue and white wires
thanks bro,this really helped me fix my controller
Thanks 2x😅❤ but do you have any advice about how to avoid irresponsive L2 r2 after fixing
I was looking for a temporary fix until the rubber piece ships in the taped worked perfectly highly recommended if that’s your issue
Omg just thanks you so much I really thought second that I need to buy a new one🎉🎉🎉
Guys can someone help me my controller r2 buttons works but not properly like it does go fully down and some games it doesn’t work
When I press down my L3 it triggers my R2 so when I play any shooting game and I try to run it makes me shoot. I was wondering if you could help me.
It's a common issue, but from what I can find, nobody knows why. Here's my video about it ruclips.net/video/_QmL9YEP3M0/видео.html
Pls help my controller doesn't work when i start games i have disconnect connect again to work but not fully it doesn't work properly
First Method worked immediately thanks a lot
I got no clue whats wrong with my controller
When i press the ps button nothing happens. When i plug it into the ps4 it just turns blue and it wont turn on (I have used different cables but nothing works). i have held the little button on the back over 5 times and nothing works. I have it right now plugged in into the ps4 and its just glowing blue, not orange blinking like the charging and not even blinking blue, just glowing blue. I got no clue how to fix it. Please help
Really appreciate it man thank you for the solid content
Thank you so much, and this video helped me 🙏🏾
I need help i tried all the methods nothing worked my r2 has 0 response i even tried changing the l2 pad with r2 pad but l2 kept working and r2 still gave no response can someone help me
When I try sprinting with my L3 button while holding my L2 button the L2 button would stop responding
Thank you so muchhh method 4 actually worked💙
Thanks great tutorial 👍 my r2 button was not giving full throttle I used a hot glue gun on the little tab in the button just enough to make a connection about 2mm works great 👍
I went to GameStop and they showed me that both my r2 and l2 buttons are constantly triggered without touching them, how do I fix?
My sis gifted me a ps4 and when i bought it back in my country the side bag in which the console and the joystick fall down hopefully the console and the joysticks are looking good the only problem is the right trigger which came a little bit out and i can see the inside and it feels lil hard to use the rt than the left trigger…anyone help me
the adding tape to the bottom of R2 button WORKED! my cars on my games are fully accelerating again!!
Solved the issue with method 5 thanks a lot goat beautiful video
Thank you so much my ps4 L2 wasn't working I'm so happy I subscribed and like your the best
How to fix scratch like when I push r2 it's scartching I don't like it
Hi, I bought a new controllers days ago but now my R2 button is way over sensitive
If I press it half way it gives 100% of throttle application. How can I fix this so it can reach 100% once all the way down?
For me it is the opposite xD
The straw method worked for me. Thanks m8!
Thank you so much bro. I was sure that spring is fucked, but 6th method worked
Honestly you are a god for method 7. I need new silicone things and I didn’t want to get the wrong one so I came to this vid and that was perfect.
My controller's r2 button, when put to an input test online, shows that the button is only pressed halfway, while every other input is just fine. How do i fix this?
Mine is the same way, i have been trying to play gta but the r2 has limited input so i can only go like 2/3rds thottle in a vehicle
hey there, any ideas as to why when pressing L1 L2 triggers?
Check the white padding under the buttons. It is likely damaged or out of place. Watch my newer video on L1 R1 repair.
The first one worked like a charm!❤
My controller was new and was working but all of a sudden when I was playing, R2 button stopped working. Any fixes?
same issue. i need answer
Same bru
yeah i was playing fortnite
It’s worn out sensors but I can’t figure out how to get the sensors out
Bro just smack down the controller once it'll be fine btw it worked for me
Thanks bro method 1 worked for me