Imagine you're at home, relaxing in bed at night. Suddenly you hear a noise at the front door..."nothing on one...binding on two...nothing on three...".
Yell through the door: "Don't bother! I have a crossbar on this side!" Then you hear from the other side: "Most people find crossbars to require extreme force, however I've found that a simple modified tool *a razor thin hook slides through your door* does the trick."
I would feel so much safer at home if i heard that because most locks just open in fear of the LPL. So if it took more than 20-30 seconds to pick for him, i would equate that 20-30 minutes for us mortals.
HA! I used the same lock on my door. I did swap the pins before that tho, and my door had drill protection plates over the lock. I used to sell these locks in my shop, and since they were pretty cheap (~20 usd), for an additional fee i did the same upgrade for my customers. And one of them did the job, there was a complaint that the lock didnt work a week after i mounted it, so i went to take a look and found a broken pick tip inside it. I was so happy that it withstood the attack.
@@roysammons2445 if you are asking for the lock, its neither of those, high security doors are very common around my shop, so the only thing you need to worry about is someone picking the lock because its protected inside the armored mechanism, and theres a tiny slit for the key on a thick steel spinning cap. If you manage to go through all that a snap resistant lock wont help much.
@@jamesbizs Naw she was a sweet young lady and she was so worried she did something wrong that she didnt even notice the key doesnt go all the way in. I did crack a massive grin tho when i saw what was inside the lock.
He should find all the ways to open the combination lock from happy meals a few years age I think it whould be hilarious what do you think. here is a link to the picture of the lock bricker.info/images/parts/clikits096.png
Yeah, I was really surprised at his conclusion of "there are definitely better options". I mean, I guess there are similar locks that are better, and maybe this one's price means you'd never consider it for common usage? It's clearly more secure than most of the locks that get reviewed here.
@@totlyepic right? Also consider that while kneeling against a real door where you can't wrap your hand around the backside of the lock to comfortably hold the tension wrench, and you can't use both your hands to manipulate and twist the lock/pick against each other, and other environmental conditions, this would be 5000% harder to do on a real door. Also LPL has picked thousands of locks, far more than I guarantee any thief ever will. This lock is beyond adequate. A burgler will just knock the door frame off the wall before they would ever go through this trouble.
mlnlme1 Well knocking off your door frame is a guaranteed way to make a lot of noise fast. In a suburban area that would get the cops called on you pretty quickly. However nobody is going to notice someone sit there for two minutes to pick a lock - I’d even bet you could sit there for 20min. If they don’t have to sit there at least 30min, bust out an angle grinder, or bust down the door it may as well not be locked at all to anyway with the patience, knowhow, and tools.
Very little drill protection. Questionable snap protection. Reasonable pick resistance. Not really a good lock if you're relying on it to secure your house.
A simple google search led me to the conclusion that this lock was not made in China. Pieces could be procured by Chinese firms but it is definitely assembled in Istanbul, Turkey.
@@danieldortch2047 trust me, you can't. I tried. These guys make it look easy, in reality you end up bending the pick in frustration even on the cheapest locks :) I realize now that lock picking is a spectator sport.
Those pins are very cute little bullets. Also LPL, I would like to see how you re-arrange those pins & springs after gutting a lock. That'll be helpful.
Good afternoon lock picking lawyer, I've been a subscriber to your channel for a while now I enjoy watching all your videos you've inspired me to expand what I do in my free time( I just shimmed my first trailer tongue lock yesterday with a hose clamp I got the biggest s*** eating grin on my face when the bottom just fell out) I was wondering if you have a second Channel or would consider starting one for putting these locks back together. I realize it probably won't be as popular as this one but I've learned quite a bit from you over the past few months and I'm sure I could learn even more watching you put them back together. Thanks in advance if you decide to respond I hope you have a great day
The word "Kilit" on the title means "lock", it's not necessarily part of the model or brand name. So you can switch that word to "lock". Regards from Turkey :)
Hi, I bought a new lock for my dads back door as at 89 years old he is not as well as he used it be, What I wanted was a keyed lock with a turnbuckle on the inside so that he could not lock us out, he had a fall and because his key was in the back of the lock we had to break a window to get in. When I went to the locksmith to get some more keys I was told that the code on my key had to be sent to Italy, and then he would then get another code back that would enable him to cut the new keys. As a result of this, I had to wait 3 days before I could get the extra keys, and they cost me about twice as much as normal keys. I am glad that it took you a few more seconds than normal to pick this lock
The most interesting thing about this vid and then cruising the comment section, was discovering the Turkish presence on this channel/lock sport is ... HUGE next to what I would've guessed!
Enjoy the channel, one thing that always comes to mind is that you regularly say there are better lock than the ones you are picking, would love to see a video outlining some of your favourite locks in the game/the most high security ones available in your opinion
I typed "most secure lock" and this is the first video that popped up, after a few second of watching I noticed that this is our house lock, I feel more secure now.. awesome😁
Hi, I'm a viewing all the way from Turkey and feel that the title is misspelled, since "kalit" is not a Turkish word. I think that it's either "kilit", which means lock, or "kalite", which means quality. Hope this helps!
If someone is picking your door and you hear clink clink clink you’re probably fine. If you hear clink clink clink “Click out of one, nothing out of two, click out of three...” then you know The Lockpicking Lawyer is coming for you
@@MisterJackTheAttack Agreed, but if your "high security lock" takes 2 minutes for a picker, then it's not very secure. There are locks that take a lot longer to pick or is even unpickable, so if the benchmark for calling it high security is 2 minutes, then the bar has not been set very high.
When you are excited because you see a LPL video that is nine minutes long. But soon realize the bulk of the vid is showing the lock taken apart! Love the vids!
Pronunciation for the Italian model SECUREMME is SECUR "AEMMAE" and the "aemmae" stands for the letter M in italian which is the double first letter of Mario Malighetti, the owner of the company. (so instead of SECUR MALIGHETTI it is only SECUR M)
@@GabryJ84 also "secure me" is not a phrase you would hear in italian , while "me" means the exact same as in english "secure" doesn't have a direct correlation to any verb
@@Tjalve70 it means "safe" and it's an adjective, there is no verb equivalent, the closest thing is "mettere in sicurezza" which means " to make something safe" more or less, while for "protect" you have a 1:1 equivalent in the verb " proteggere"
Nope, he's like a superhero. You can look him right in the face, listen to him talk, watch him pick a lock in front of you while arguing a court case; you'll think"wow! You could almost be the Lock Picking Lawyer. You know, if you weren't mortal."
I'd definitely like to watch how he would pick this lock installed inside the actual door where there's no tactile feedback to his left hand. And a surround noise level is an actual street.
One day I’m watching gun videos. Next day I’m watching LPL? I’m hooked. Now I go shopping for a lock and I’m like nope, nope, where’s the LPL certificate?😂👍👍Awesome videos
When you do this kind of videos and the product is not that good, is it possible to offer a good alternative at a similar place on the spot? It goes something like "this is advertised as a high security lock but there are other better products in this price point, like the product X" Great videos other than that!
Watching his videos, I've learned that the Avocet ABS was the one that made him work the hardest (most steps) and required even a special little magnet to pick. No way that any regular picker would bother with all that. However, the one that he couldn't pick and one of much simpler construction was the Bowley. Someone else picked it but that required a ridiculously complicate custom picking setup. Even then, the Bowley required that the picker pick his way back out or lose his fancy equipment stuck in the lock. I'm going with the Bowley.
@@danielkorladis7869 And expansive one :| I think they've got two product and the cheapest one is 150 USD, and each suppl. are like 20$ a piece. But, yeah, they look legit :)
Love watching your vids, the flat machined area is also common when drilling along a radius....one line of drill holes is fairly easily aligned on the peak but two rows the drill would walk down the radius
I blame Skyrim etc for my finding your videos. Why I keep watching them I have no idea, I've even got my Nephew watching them now too. Never have I picked a lock, and I probably never will, yet, here I am watching again.
Fairly common locks in Iranian apartment locks when I was there for a visit. Can't tell if they've been modified so that extra pins actually come into play, but I'll have a look when I go back.
Dylan Brockman - I always see LPL as a purist. He’s got amazing technique because he examines and understands each lock. I’ve no doubt he could pick a dozen of these in a row without seeing a key. Other locksporters have more of a practical background from being locksmiths or law enforcement and so perhaps don’t approach with the same level of clinical technique but, make no mistake, I’d stack LPL against any of them even if the lock was a mystery and a key not seen. If you check some of his older videos when he was starting out in lock sport, he made pretty short work, (for the most part), of some tricky challenge locks from the likes of Papa Gleb and Texas Jim. Seeing a key is definitely not a must for him to be able to pick the lock. You should check them out. It’s remarkable how very little has changed except from an increase in production value.
being able to see the key really only helps when the lock has some kind of unusual aspect to it (like the 2 rows of 5 pins in this lock) since you have to feel your way through the lock rather than see what you're doing. Someone like LPL, who has had his picks in just about every kind of lock imaginable, would only need a moment of digging around the lock to feel whats going on inside.
@@adamwest8711 I'll check them out, thanks! From the videos I've seen I have little doubt this is the case. We can all disregard @f lucifer's rude comment.
i watch your videos like i am solving math questions. i say mostly if i give 2 minutes for. problem, an avarage student can solve this problem in 6 or 7 minutes 😂 i see that my door lock can be opened in 2 minutes by LPL and i am sure that any thief try to open it 😂😂 greetings from turkey 👍🏻
Hey LPL I got my first set today, a basic 17 piece Dino, seems ok. The first thing I noticed is how tired my fingers get on the tensioning tool after quite a bit of practice. Love the vids!
Even though he recons this lock will be challenging, he opens it up in far below 2½ minutes. It is just like with these security pins and false gates, LPL and rare lock pickers with his skills seem to always advocate that locks should be fitted with security pins and false gates ... but such extras never deter LPL (and his rare peers) to open locks that ARE equipped with them just as quickly and with just as much ease!
Might I recommend trying to pick a MUL-T-LOCK. They are fitted so that if you lose a key you can insert another one to lock that key out. This would imply if you tried to pick it, it would lock the original key out. Unfortunately each key costs like £20 so I don’t know if you want to spend that kind of money on this kind of lock but it may give you a challenge... tbh you’ll probably open it instantly 🤦♂️
If you see this, I believe this is the lock that I would like you to try and pick: www.mul-t-lock.com/en-GB/site/mul-t-lock/products/cylinders/cylinders/euro-cylinder/
Can you do another turkish brand ? Especially "Kale"( which means fort btw.) I have been using that brand for years and one time i called a lockpicker they told me that series so hard to pick they wouldnt give service to me.
So I've been thinking about this for a while and I believe I've come up with what would technically be an unthinkable lock. The most keys are single-sided, maybe double-sided, so I'm thinking a triple-sided key with 10 pins per side for a total of 30 pins. The lock has two keys, and both keys have to be turned at the same time but at different speeds. Basically the goal is to make it require way more mechanical input then someone could physically do. The only thing left at that point was just be making sure that they made it out of something other than paper mache so you couldn't just bust it open
your suspicion that both locks are made by the same entity or partnership is true, but I would rather guess that it is an Italian design assembled in Turkey with components made in China and about the issue with the false gates, again I would guess that they designed a modular system which can be customized according to certain aspects of the needs in a certain market. At the end $ talks if you get what I mean😁👍 thanks for the nice video. btw if you think about people are driving different types of cars with essentially the same underpinnings and engines only capped by software at different power levels which are sold for different prices, why shouldn't the lock industry do the same thing.
Imagine you're at home, relaxing in bed at night. Suddenly you hear a noise at the front door..."nothing on one...binding on two...nothing on three...".
🤣
Yell through the door: "Don't bother! I have a crossbar on this side!" Then you hear from the other side: "Most people find crossbars to require extreme force, however I've found that a simple modified tool *a razor thin hook slides through your door* does the trick."
I would feel so much safer at home if i heard that because most locks just open in fear of the LPL. So if it took more than 20-30 seconds to pick for him, i would equate that 20-30 minutes for us mortals.
🙊
LOL
HA! I used the same lock on my door. I did swap the pins before that tho, and my door had drill protection plates over the lock. I used to sell these locks in my shop, and since they were pretty cheap (~20 usd), for an additional fee i did the same upgrade for my customers. And one of them did the job, there was a complaint that the lock didnt work a week after i mounted it, so i went to take a look and found a broken pick tip inside it. I was so happy that it withstood the attack.
Snap resistant?
Strengthened?
“You sold me a defective lock!!!” “ oh did I? :D. Now kiss my ring and thank me profusely “
@@roysammons2445 if you are asking for the lock, its neither of those, high security doors are very common around my shop, so the only thing you need to worry about is someone picking the lock because its protected inside the armored mechanism, and theres a tiny slit for the key on a thick steel spinning cap. If you manage to go through all that a snap resistant lock wont help much.
@@jamesbizs Naw she was a sweet young lady and she was so worried she did something wrong that she didnt even notice the key doesnt go all the way in. I did crack a massive grin tho when i saw what was inside the lock.
@@momchilkarchev5019 I like your level of security 👍🏻
I'd totally watch a lockpicking world championship if you were the commentator
The championship couldn't be longer than 10 minutes
@@simastautkevicius1372 maybe if the contestants are relatively new and he was just the commentator.
We'd need five LPLs. four of them to actually compete, and one for commentary.
@@escutus no no, I mean that Mrs. LPL could not handle more than 10 minutes
@@simastautkevicius1372 true. Lol. That reminds me of the April fool's video he made.
I think all the locks are picked just by his voice :D so soft and gentle talking they can't resist :D
He is the Bob Ross of Lock Picking, now if only we could get him on PBS teaching lock picking.
Obviously you missed his videos about his tiny coq and wife's beaver
Woah I just noticed he’s a ASMR channel :0
I'd imagine your comment to be very confusing to people unaware of the context.
Let's all pause for a moment and imagine him working Ms LPL and commenting it .....tensioning, deep false sets, dimples, overlifting :)
Bu kanalı bilen 3-5 Türk arkadaşa selam olsun.
Bence bizim sayımızdan daha büyük mahalleler vardır bu ülkede :D
as
Bir de Kale kilit gönderelim derim dostlar. Ülkemizde üretilen kilitlerin kalitesini/güvenliğini görmek adına.
Aleykum selam arkadaşlar, hangileriniz hırsız dürüst olun =)
Selamlar
This lock took like two minutes to pick. After adjusting for LPL, that's a lot of time.
He should find all the ways to open the combination lock from happy meals a few years age I think it whould be hilarious what do you think.
here is a link to the picture of the lock
bricker.info/images/parts/clikits096.png
Yeah, I was really surprised at his conclusion of "there are definitely better options". I mean, I guess there are similar locks that are better, and maybe this one's price means you'd never consider it for common usage? It's clearly more secure than most of the locks that get reviewed here.
@@totlyepic right? Also consider that while kneeling against a real door where you can't wrap your hand around the backside of the lock to comfortably hold the tension wrench, and you can't use both your hands to manipulate and twist the lock/pick against each other, and other environmental conditions, this would be 5000% harder to do on a real door. Also LPL has picked thousands of locks, far more than I guarantee any thief ever will.
This lock is beyond adequate. A burgler will just knock the door frame off the wall before they would ever go through this trouble.
totlyepic I think maybe it’s a one-trick-pony: complex mechanism. But for a little higher price, get a better made lock.
mlnlme1 Well knocking off your door frame is a guaranteed way to make a lot of noise fast. In a suburban area that would get the cops called on you pretty quickly.
However nobody is going to notice someone sit there for two minutes to pick a lock - I’d even bet you could sit there for 20min.
If they don’t have to sit there at least 30min, bust out an angle grinder, or bust down the door it may as well not be locked at all to anyway with the patience, knowhow, and tools.
LPL, the only person on the planet that can legitimately use the term "sidebar" in both his profession and his hobby. Cheers! Chris.
😂😂😂👍
Only if he litigates 😂
That's a pretty good lock, especially if you replaced the upper pins with serrated or spool pins. No one would bother picking that lock.
Very little drill protection. Questionable snap protection. Reasonable pick resistance. Not really a good lock if you're relying on it to secure your house.
John Davis drill resistance ? This is not for a bank safe.
Onur Demir so um like someone hasn’t seen a lock drilled yet
@@cultri6659 people drill locks, it’s just a case of finding the quickest way in. Chances are it’s usually easier to just break open a window.
@@crispinmcsticks Or melt the lock. Heat is always fun.
I wonder if LPL's opening arguments in court start like: "This is the lockpicking lawyer and what we have today is an innocent defendant..."
"There is nothing on defendant one, two is binding.."
@@Dormant6996click out of defendant 3 ... oh.
You've inspired me to sell all of my possessions and spend my life picking locks for satisfaction. My wife thanks you.
So it’s been a year, how did it work for you?
@@colonelgraff9198 Not very good aparently.
@@colonelgraff9198He probably sold his phone
Wait so did this guy seriously sold everything he had?
@@user-rh4qd6se9n Hahahaaa!!!
woah, over 9 minutes?!?! This is like Endgame running time for the LPL. Must be a fun lock!
no it's around 2:25 he dissambles the lock afterwards
It's still an impressive resistance against the LPL though
@@kiliane.3266 He falls into a false set in 2:25 but opens the lock at 3:20
@@erkinoztekin i meant He needs 2:25m to Pick the lock
@@kiliane.3266 oh ok my bad
I still don't understand why I'm watching this channel I guess there is something soothing about his voice 😂😂😂😂
"First is binding, second is already set, third is a bit hard to bind, just a sec...", and imagine he's a dentist....
...back to the beginning... Man the patience on this guy
Oh and same herw
Here*
Any audiobooks from LPL?
A simple google search led me to the conclusion that this lock was not made in China. Pieces could be procured by Chinese firms but it is definitely assembled in Istanbul, Turkey.
All pieces is made in Turkey
already workers are not expensive in turkey, minimum salary is 310 usd
@Elif Asya Gül çinde üretilmesinin türkiyede üretilmesinden daha pahalıya patlayabileceğini anlatmaya çalıştım ?
@Elif Asya Gül haklı olabilirsiniz bilemiyorum bence öyle demek istemedim ama
@@Yusuf_AGAC çinde şartlar daha kötü
*after watching a LPL marathon*
Anyone: When did you become a lockpicking expert?
Me: Last night
Ha yeah im sure id able to pick atleast some locks after watching all these videos
@@danieldortch2047 Yeah, me too - I could pick the locks susceptible to raking if you loaned me the rake...
Lock smith: so how long you been in the bussiness?
Me: since this mornin'
@@danieldortch2047 trust me, you can't. I tried. These guys make it look easy, in reality you end up bending the pick in frustration even on the cheapest locks :)
I realize now that lock picking is a spectator sport.
Yup.. I have a lockpick set on the way. Lol
Hearing you say 'i might have overset #4' makes me feel a million times better...
Epic number of internal components that would scare most sports lock enthusiasts. LPL: I've seen better.
Those pins are very cute little bullets.
Also LPL, I would like to see how you re-arrange those pins & springs after gutting a lock. That'll be helpful.
I'd love to see one of these put back together, I can't be the only one looking at that mess wondering how much harder it is going back in lol.
Good afternoon lock picking lawyer, I've been a subscriber to your channel for a while now I enjoy watching all your videos you've inspired me to expand what I do in my free time( I just shimmed my first trailer tongue lock yesterday with a hose clamp I got the biggest s*** eating grin on my face when the bottom just fell out) I was wondering if you have a second Channel or would consider starting one for putting these locks back together. I realize it probably won't be as popular as this one but I've learned quite a bit from you over the past few months and I'm sure I could learn even more watching you put them back together. Thanks in advance if you decide to respond I hope you have a great day
The word "Kilit" on the title means "lock", it's not necessarily part of the model or brand name. So you can switch that word to "lock".
Regards from Turkey :)
Kale tuzaklıları deneyecekti onları merak ediyorum
I cant believe companies don’t come to you first as a consultant.
Hi, I bought a new lock for my dads back door as at 89 years old he is not as well as he used it be, What I wanted was a keyed lock with a turnbuckle on the inside so that he could not lock us out, he had a fall and because his key was in the back of the lock we had to break a window to get in. When I went to the locksmith to get some more keys I was told that the code on my key had to be sent to Italy, and then he would then get another code back that would enable him to cut the new keys. As a result of this, I had to wait 3 days before I could get the extra keys, and they cost me about twice as much as normal keys. I am glad that it took you a few more seconds than normal to pick this lock
The most interesting thing about this vid and then cruising the comment section, was discovering the Turkish presence on this channel/lock sport is ... HUGE next to what I would've guessed!
I think it is crazy cool that you can feel the type of driver pins! You are very skilled, KEEP UP THE GOOD WORK!!:)
Agree, I can just tell there is a pin, end of it.
Enjoy the channel, one thing that always comes to mind is that you regularly say there are better lock than the ones you are picking, would love to see a video outlining some of your favourite locks in the game/the most high security ones available in your opinion
as a turkish lockpicking lawyer fan, i was always thinking about all these locks being unavailable in our country
aaaand this happened. thank you LPL
Took more than 30 seconds for LPL to pick I’m gonna go ahead and secure all of my possessions with this lock
Watching you since from the beginning, sending my love from 🇹🇷🇹🇷🇹🇷
Kilit seven kaç kişiyiz as as🇹🇷🇹🇷🇹🇷🇹🇷
@@giganticyufka kale kilit gönderen olmadıysa gönderelim 😂
Evini soyacak ne diyon
@@astronot5555 dogru dedin kral
Awesome video,loved the picking and gutting,thanks for the review
I would love to see a video of these style locks being manufactured. Cool lock!
I will change my lock after that video,coz im living in İstanbul & using that lock brand (same model) btw thanks for the video
I typed "most secure lock" and this is the first video that popped up, after a few second of watching I noticed that this is our house lock, I feel more secure now.. awesome😁
I'm surprised that nobody has sent you a pinning tray with ~fifteen channels yet. You take apart so many complex locks I'm sure it would be handy.
I was upset and angry before this video, and cool and relaxed now. A faceless Bob ross
Hi, I'm a viewing all the way from Turkey and feel that the title is misspelled, since "kalit" is not a Turkish word. I think that it's either "kilit", which means lock, or "kalite", which means quality. Hope this helps!
Yeah, it's actually 'Kilit'
I subscribed to you for that great point you made.
Oğuz Kadıoğlu I did misspell it. Thanks for the tip. 👍
And there I thought it's a pun in Turkish, mixing these two words.
Nope. There isn't. At least with these two words.
If someone is picking your door and you hear clink clink clink you’re probably fine.
If you hear clink clink clink “Click out of one, nothing out of two, click out of three...” then you know The Lockpicking Lawyer is coming for you
I'd totally watch you try solving some puzzles, like Chris Ramsay and Mr. Puzzle, and getting to the core of it. I love you videos.
Thought it would be harder to pick then that for you. Just shows your skill, thanks for the video.
I am a Turkish subscriber and I love your videos. I would like to see more Turkish locks in this channel.That would be awesome!!!
I love you and your videos as a Turkish audience
This is quickly becoming my favourite channel.
Hello LPL, I decided to get into lock picking as a hobby after watching you. I just ordered a nice lock pick set and some locks.
Same, mine should be coming today
The Outhouse Studios nice. Mine should be here at the end of the week. What set did you get?
I want to do the same, but I'm currently unemployed... So I'd better use my time looking for a job...
radi become a locksmith
LPL : This is a turkish HIGH security lock.
Also LPL : Picks lock in about 2 minutes :)
Insane security lock, takes 10 seconds extra :)
Also LPL: From the same chinese factory
That 2 minute pick time is longer than some videos
@@MisterJackTheAttack Agreed, but if your "high security lock" takes 2 minutes for a picker, then it's not very secure.
There are locks that take a lot longer to pick or is even unpickable, so if the benchmark for calling it high security is 2 minutes, then the bar has not been set very high.
@@JohnDoe-bd5sz don't forget LPL is essentially a God at lock picking so 2 minute pick for him is 20 minutes for a two bit theif
What about giving locks a LPL-Score at the end of the video?
DAF is a manufacturer itself in Turkey, so I suspect the Italian brand you mentioned must be made by them as well
All of these videos give me a few ideas for locks, although I think they would be bulky. Maybe good for dead bolts.
When you are excited because you see a LPL video that is nine minutes long. But soon realize the bulk of the vid is showing the lock taken apart! Love the vids!
Pronunciation for the Italian model SECUREMME is SECUR "AEMMAE" and the "aemmae" stands for the letter M in italian which is the double first letter of Mario Malighetti, the owner of the company. (so instead of SECUR MALIGHETTI it is only SECUR M)
I don't really speak italian, but wouldn't "secur aemmae" be pronounced as the words "secure me" or "protect me" in italian?
@@Tjalve70 In that case it would have been written SECURME. In Italy the letter "m" is pronounced as "emme" (aemmae)
@@GabryJ84 also "secure me" is not a phrase you would hear in italian , while "me" means the exact same as in english "secure" doesn't have a direct correlation to any verb
@@ZuppaD.Cipolle I know that Google Translate can not be trusted very much, but what does the italian word "sicuro" mean?
@@Tjalve70 it means "safe" and it's an adjective, there is no verb equivalent, the closest thing is "mettere in sicurezza" which means " to make something safe" more or less, while for "protect" you have a 1:1 equivalent in the verb " proteggere"
Probably the only youtuber who doesn't stretch the video from 9:30 to 10 minutes
buraya nasıl geldim
Ben NileBlue'dan geldim
@@raynerhutton1417 ben cok kayboldum gelirken
@@serci555 yutup keşfeti kullanmıyom hiç
@@serci555 hayır önerilmedi. video altlarına tık tık yaparken buraya rastladım.
Can you do a video on reassembling a lock after gutting it?
If I had to guess it should be the same operations in reverse, making sure to not mix up the pins (or else the key won't work)
One of his videos around 380 i guess he said he will be reassembling the locks after he gutted it. I saw it for like 5 videos. Then It was the same :D
Pathetic Fallacy, he has done that multiple times.
Pathetic Fallacy, it basically is some pins and springs. Not that video worthy.
Just play the video in reverse.
Was expecting you to have a little challenging time with that ! But it was just a walk in the park !
Well done..
Over the last 12 months, this channel has exploded in popularity.
I'm wondering if any of LPL's followers ever recognize him by his voice when he is out and about.
Never happened, as far as I know.
Nope, he's like a superhero. You can look him right in the face, listen to him talk, watch him pick a lock in front of you while arguing a court case; you'll think"wow! You could almost be the Lock Picking Lawyer. You know, if you weren't mortal."
Hi! I’m turkish and I find you channel like 3 months ago. I love your content tbh and oddly It helps me to relax. Take care x
Your* :P
I'd definitely like to watch how he would pick this lock installed inside the actual door where there's no tactile feedback to his left hand. And a surround noise level is an actual street.
The noise and imagine a lock that has been used for about 5 years with all the dust and corossion in it.
One day I’m watching gun videos. Next day I’m watching LPL? I’m hooked. Now I go shopping for a lock and I’m like nope, nope, where’s the LPL certificate?😂👍👍Awesome videos
Thank you. Interesting lock. I half expected passive pins as well.
When you do this kind of videos and the product is not that good, is it possible to offer a good alternative at a similar place on the spot? It goes something like "this is advertised as a high security lock but there are other better products in this price point, like the product X" Great videos other than that!
Watching his videos, I've learned that the Avocet ABS was the one that made him work the hardest (most steps) and required even a special little magnet to pick. No way that any regular picker would bother with all that.
However, the one that he couldn't pick and one of much simpler construction was the Bowley. Someone else picked it but that required a ridiculously complicate custom picking setup. Even then, the Bowley required that the picker pick his way back out or lose his fancy equipment stuck in the lock.
I'm going with the Bowley.
@@jmchez damn, that sounds like a really good lock.
@@danielkorladis7869 And expansive one :| I think they've got two product and the cheapest one is 150 USD, and each suppl. are like 20$ a piece. But, yeah, they look legit :)
Love watching your vids, the flat machined area is also common when drilling along a radius....one line of drill holes is fairly easily aligned on the peak but two rows the drill would walk down the radius
I'm watching this on my TV, and it's showing the great detail on your table and the cylinder - time to bring out the mask and/or fingerprint cleaner.
I really like that pin tray Bill CnC'd you. So clean and so personalized.
I saw the 10 minute video length and thought "I've gotta get this lock" and then it was just the disassembly that took so long lol
I look forward to seeing locks picked where they actually are, on houses, buildings, fences etc.
You are simply the most gifter picker ever! Amazing
I blame Skyrim etc for my finding your videos. Why I keep watching them I have no idea, I've even got my Nephew watching them now too. Never have I picked a lock, and I probably never will, yet, here I am watching again.
Still better then master lock even at master locks best!!
Fairly common locks in Iranian apartment locks when I was there for a visit. Can't tell if they've been modified so that extra pins actually come into play, but I'll have a look when I go back.
Could you approach this lock and others and pick them successfully without seeing the key? Love the channel by the way. Keep up the good work.
I was wondering this as well! Looks like a tricky lock unless you have an idea of what to expect, but I'm no expert. Let us know LPL!
Dylan Brockman - I always see LPL as a purist. He’s got amazing technique because he examines and understands each lock. I’ve no doubt he could pick a dozen of these in a row without seeing a key.
Other locksporters have more of a practical background from being locksmiths or law enforcement and so perhaps don’t approach with the same level of clinical technique but, make no mistake, I’d stack LPL against any of them even if the lock was a mystery and a key not seen.
If you check some of his older videos when he was starting out in lock sport, he made pretty short work, (for the most part), of some tricky challenge locks from the likes of Papa Gleb and Texas Jim. Seeing a key is definitely not a must for him to be able to pick the lock.
You should check them out. It’s remarkable how very little has changed except from an increase in production value.
being able to see the key really only helps when the lock has some kind of unusual aspect to it (like the 2 rows of 5 pins in this lock) since you have to feel your way through the lock rather than see what you're doing. Someone like LPL, who has had his picks in just about every kind of lock imaginable, would only need a moment of digging around the lock to feel whats going on inside.
@@adamwest8711 I'll check them out, thanks! From the videos I've seen I have little doubt this is the case. We can all disregard @f lucifer's rude comment.
You manhandled that thing, the resilience of that pick is amazing. :D
i watch your videos like i am solving math questions.
i say mostly if i give 2 minutes for. problem, an avarage student can solve this problem in 6 or 7 minutes 😂
i see that my door lock can be opened in 2 minutes by LPL and i am sure that any thief try to open it 😂😂
greetings from turkey 👍🏻
Woah LPL! It took you 2 mins to open a lock! Must be a pretty badass lock!!
Or he's losing his touch ;)
I'd like to see him put that lock back together again to factory specs.
A 9 minute LPL video? What a great treat
Hey LPL I got my first set today, a basic 17 piece Dino, seems ok. The first thing I noticed is how tired my fingers get on the tensioning tool after quite a bit of practice. Love the vids!
Even though he recons this lock will be challenging, he opens it up in far below 2½ minutes. It is just like with these security pins and false gates, LPL and rare lock pickers with his skills seem to always advocate that locks should be fitted with security pins and false gates ... but such extras never deter LPL (and his rare peers) to open locks that ARE equipped with them just as quickly and with just as much ease!
10 pins, 20, none present a problem to our legal eagle picker!
That took "forever" to pick.
It took just over 2 minutes of actual picking.
This is the earliest I've ever been to any video. Good job man.
Might I recommend trying to pick a MUL-T-LOCK. They are fitted so that if you lose a key you can insert another one to lock that key out. This would imply if you tried to pick it, it would lock the original key out. Unfortunately each key costs like £20 so I don’t know if you want to spend that kind of money on this kind of lock but it may give you a challenge... tbh you’ll probably open it instantly 🤦♂️
If you see this, I believe this is the lock that I would like you to try and pick: www.mul-t-lock.com/en-GB/site/mul-t-lock/products/cylinders/cylinders/euro-cylinder/
Interesting to see a lock from my country after a lot videos
You have such a pleasant voice. If you read a book for me, I could listen for hours...
Amazing stuff - making it look easy as ever! I can hardly feel the pins let alone what type they are. :)
Can you do another turkish brand ? Especially "Kale"( which means fort btw.) I have been using that brand for years and one time i called a lockpicker they told me that series so hard to pick they wouldnt give service to me.
LPL spend 2.5 mins. I will definitely buy this lock.
This lock is known from the movie LPL Express.
So I've been thinking about this for a while and I believe I've come up with what would technically be an unthinkable lock.
The most keys are single-sided, maybe double-sided, so I'm thinking a triple-sided key with 10 pins per side for a total of 30 pins. The lock has two keys, and both keys have to be turned at the same time but at different speeds.
Basically the goal is to make it require way more mechanical input then someone could physically do.
The only thing left at that point was just be making sure that they made it out of something other than paper mache so you couldn't just bust it open
If you can find any, there is another company called Kale. They are much more common and sold as better quality.
You are rough on your hands, almost every video I see a fresh cut or a scar. Take it easy man!
This is startling to look like a fun hobby...
I can't get over the phallic symbol in the pinning tray :O
your suspicion that both locks are made by the same entity or partnership is true, but I would rather guess that it is an Italian design assembled in Turkey with components made in China and about the issue with the false gates, again I would guess that they designed a modular system which can be customized according to certain aspects of the needs in a certain market. At the end $ talks if you get what I mean😁👍 thanks for the nice video.
btw if you think about people are driving different types of cars with essentially the same underpinnings and engines only capped by software at different power levels which are sold for different prices, why shouldn't the lock industry do the same thing.
Alot of pin action there my friend Happy picking and have a great day
damn that took him a lot of time. I live in turkey. I probably can find this and make it my home lock.
Interesting. I had just been debating on picking a couple of these up a few weeks ago.
Looks like a decent lock
I dont know why i love your videos. Nice camera.
You should totally build a lock from reactive Armour and then try opening that up. Would be fun!
Love your work.
Now I want to see a video of him putting this one back together that can still be opened by the key.